main
Ray Publish 0.1.0 1259baf
{
  "slug": "esp32-c6",
  "version": "0.1.0",
  "type": "component",
  "description": "ESPRESSIF SYSTEMS Microcontrollers (MCU/MPU/SOC), QFN-40-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "embedded processors & controllers",
    "esp32-c6",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "esp32-c6.kicad_sym",
    "esp32-c6.kicad_mod",
    "esp32-c6.glb",
    "esp32-c6.step",
    "esp32-c6.lbr",
    "docs/hero.png",
    "docs/esp32-c6-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "esp32-c6-hero.glb",
    "esp32-c6-hero.overlay.json",
    "esp32-c6-etched.glb"
  ],
  "component": {
    "mpn": "ESP32-C6",
    "manufacturer": "ESPRESSIF SYSTEMS",
    "package": "QFN-40-EP(5x5)",
    "pin_count": 41,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://www.espressif.com/sites/default/files/documentation/esp32-c6_datasheet_en.pdf",
    "parts": {
      "symbol": "esp32-c6.kicad_sym",
      "footprint": "esp32-c6.kicad_mod",
      "model_3d": "esp32-c6-hero.glb",
      "model_3d_plain": "esp32-c6-etched.glb",
      "model_3d_step": "esp32-c6-etched.step",
      "model_3d_step_plain": "esp32-c6.step",
      "lbr": "esp32-c6.lbr"
    },
    "distributor_links": {
      "lcsc": "C5364646",
      "mouser": "356-ESP32-C6"
    },
    "distributor_check": {
      "checked_at": "2026-10-27T22:58:04Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 977 calls left today"
      },
      "mouser": {
        "pn": "356-ESP32-C6",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ANT",
        "type": "bidirectional",
        "description": "RF input and output pin for the antenna."
      },
      {
        "number": "2",
        "name": "VDDA3P3",
        "type": "power_in",
        "description": "Analog power domain supply input."
      },
      {
        "number": "3",
        "name": "VDDA3P3",
        "type": "power_in",
        "description": "Analog power domain supply input."
      },
      {
        "number": "4",
        "name": "CHIP_PU",
        "type": "input",
        "description": "High enables the chip (powered up), low disables it (powered down); do not leave this pin floating."
      },
      {
        "number": "5",
        "name": "VDDPST1",
        "type": "power_in",
        "description": "Supplies the LP digital and part of the analog pin power domain (LP IO pins)."
      },
      {
        "number": "6",
        "name": "XTAL_32K_P",
        "type": "bidirectional",
        "description": "Positive 32 kHz clock signal connected to the external crystal or oscillator; also GPIO0 and ADC1_CH0."
      },
      {
        "number": "7",
        "name": "XTAL_32K_N",
        "type": "bidirectional",
        "description": "Negative 32 kHz clock signal connected to the external crystal or oscillator; also GPIO1 and ADC1_CH1."
      },
      {
        "number": "8",
        "name": "GPIO2",
        "type": "bidirectional",
        "description": "General-purpose IO with LP IO MUX and analog function ADC1_CH2; also FSPIQ function."
      },
      {
        "number": "9",
        "name": "GPIO3",
        "type": "bidirectional",
        "description": "General-purpose IO with LP IO MUX and analog function ADC1_CH3."
      },
      {
        "number": "10",
        "name": "MTMS",
        "type": "bidirectional",
        "description": "JTAG test mode select, also used as a strapping pin for SDIO sampling and driving clock edge; floating by default."
      },
      {
        "number": "11",
        "name": "MTDI",
        "type": "bidirectional",
        "description": "JTAG test data input, also used as a strapping pin for SDIO sampling and driving clock edge; floating by default."
      },
      {
        "number": "12",
        "name": "MTCK",
        "type": "bidirectional",
        "description": "JTAG test clock; input enabled with internal weak pull-up depending on EFUSE_DIS_PAD_JTAG."
      },
      {
        "number": "13",
        "name": "MTDO",
        "type": "bidirectional",
        "description": "JTAG test data output, high impedance type O/T in the IO MUX function table."
      },
      {
        "number": "14",
        "name": "GPIO8",
        "type": "bidirectional",
        "description": "General-purpose IO and strapping pin for chip boot mode and ROM message printing; floating by default."
      },
      {
        "number": "15",
        "name": "GPIO9",
        "type": "bidirectional",
        "description": "General-purpose IO and strapping pin for chip boot mode; internal weak pull-up enabled by default."
      },
      {
        "number": "16",
        "name": "GPIO10",
        "type": "bidirectional",
        "description": "General-purpose IO pin with IO MUX function GPIO10."
      },
      {
        "number": "17",
        "name": "GPIO11",
        "type": "bidirectional",
        "description": "General-purpose IO pin with IO MUX function GPIO11."
      },
      {
        "number": "18",
        "name": "GPIO12",
        "type": "bidirectional",
        "description": "General-purpose IO that is also USB_D- of the USB Serial/JTAG controller; default drive strength 40 mA."
      },
      {
        "number": "19",
        "name": "GPIO13",
        "type": "bidirectional",
        "description": "General-purpose IO that is also USB_D+ of the USB Serial/JTAG controller; USB pull-up enabled by default."
      },
      {
        "number": "20",
        "name": "SPICS0",
        "type": "bidirectional",
        "description": "SPI flash chip select (CS#) for off-package flash; powered from VDD_SPI."
      },
      {
        "number": "21",
        "name": "SPIQ",
        "type": "bidirectional",
        "description": "SPI flash data line MISO (SIO1) for off-package flash; powered from VDD_SPI."
      },
      {
        "number": "22",
        "name": "SPIWP",
        "type": "bidirectional",
        "description": "SPI flash write protect (WP#, SIO2); powered from VDD_SPI and reserved for flash use."
      },
      {
        "number": "23",
        "name": "VDD_SPI",
        "type": "power_out",
        "description": "Supplies in-package and off-package flash; can only be used as GPIO27 if flash is powered by an external supply."
      },
      {
        "number": "24",
        "name": "SPIHD",
        "type": "bidirectional",
        "description": "SPI flash hold (HOLD#, SIO3) for off-package flash; powered from VDD_SPI."
      },
      {
        "number": "25",
        "name": "SPICLK",
        "type": "bidirectional",
        "description": "SPI flash clock output for off-package flash; powered from VDD_SPI."
      },
      {
        "number": "26",
        "name": "SPID",
        "type": "bidirectional",
        "description": "SPI flash data line MOSI (SIO0) for off-package flash; powered from VDD_SPI."
      },
      {
        "number": "27",
        "name": "GPIO15",
        "type": "bidirectional",
        "description": "General-purpose IO and strapping pin for JTAG signal source control; floating by default."
      },
      {
        "number": "28",
        "name": "VDDPST2",
        "type": "power_in",
        "description": "Supplies the HP digital power domain (HP IO pins)."
      },
      {
        "number": "29",
        "name": "U0TXD",
        "type": "bidirectional",
        "description": "UART0 transmit data output, output enabled, internal weak pull-up enabled."
      },
      {
        "number": "30",
        "name": "U0RXD",
        "type": "bidirectional",
        "description": "UART0 receive data input with input enabled and internal weak pull-up enabled."
      },
      {
        "number": "31",
        "name": "SDIO_CMD",
        "type": "bidirectional",
        "description": "SDIO interface command line, input enabled with internal weak pull-up at reset."
      },
      {
        "number": "32",
        "name": "SDIO_CLK",
        "type": "input",
        "description": "SDIO interface clock input, input enabled with internal weak pull-up at reset."
      },
      {
        "number": "33",
        "name": "SDIO_DATA0",
        "type": "bidirectional",
        "description": "SDIO interface data line 0, input enabled with internal weak pull-up at reset."
      },
      {
        "number": "34",
        "name": "SDIO_DATA1",
        "type": "bidirectional",
        "description": "SDIO interface data line 1, input enabled with internal weak pull-up at reset."
      },
      {
        "number": "35",
        "name": "SDIO_DATA2",
        "type": "bidirectional",
        "description": "SDIO interface data line 2, input enabled with internal weak pull-up at reset."
      },
      {
        "number": "36",
        "name": "SDIO_DATA3",
        "type": "bidirectional",
        "description": "SDIO interface data line 3, input enabled with internal weak pull-up at reset."
      },
      {
        "number": "37",
        "name": "VDDA1",
        "type": "power_in",
        "description": "Analog power domain supply input."
      },
      {
        "number": "38",
        "name": "XTAL_N",
        "type": "passive",
        "description": "External clock input/output connected to the chip crystal or oscillator; negative side of the differential clock."
      },
      {
        "number": "39",
        "name": "XTAL_P",
        "type": "passive",
        "description": "External clock input/output connected to the chip crystal or oscillator; positive side of the differential clock."
      },
      {
        "number": "40",
        "name": "VDDA2",
        "type": "power_in",
        "description": "Analog power domain supply input."
      },
      {
        "number": "41",
        "name": "GND",
        "type": "power_in",
        "description": "External ground connection."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives no electrical limits (voltage, current, leakage) per pin in the QFN40 pin table,; The QFN40 package has an exposed thermal pad that the text does not list separately; only pin 41 (GN; KiCad type for VDD_SPI is ambiguous in the datasheet (Power/IO; input from backup line, output to fl"
        ],
        "pages_sent": 47,
        "cost_usd": 0.1312,
        "at": "2026-10-27T22:57:45"
      },
      "datasheet": {
        "url": "https://www.espressif.com/sites/default/files/documentation/esp32-c6_datasheet_en.pdf",
        "pages": 86,
        "sha256": "372a5b42b2900c83",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 41,
        "described": 41,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "esp32-c6.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8f37bc7a9aab4742c34f137d9822c0352acc227532830034555744338483cdfc",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "esp32-c6-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "155e83e0c77a2e1b846f37787359d16919c8d5d0fa8e7501971e07a68acac215",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}