main
History Download
Ray Publish 0.1.0 c989135

ESP32-C5HR8

Espressif Systems · Microcontrollers (MCU/MPU/SOC) · QFN-48(6x6)

ESP32-C5HR8 from Espressif Systems, in a QFN-48(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDDA6 power_in Analog power domain supply input, 3.3 V.
2 GND power_in External ground connection.
3 VDDA7 power_in Analog power domain supply input, 3.3 V.
4 XTAL_N passive Negative side of the differential external clock input/output connected to the chip's crystal or oscillator.
5 XTAL_P passive Positive side of the differential external clock input/output connected to the chip's crystal or oscillator.
6 VDDA8 power_in Analog power domain supply input, 3.3 V.
7 CHIP_PU input Chip enable and reset: high turns the chip on, low powers it off, powered by VDDPST1; must not be left floating and needs at least 50 us low (tRST) to reset.
8 VDDPST1 power_in Supply input for the LP digital power domain and the LP IO pins.
9 XTAL_32K_P bidirectional GPIO0/LP_GPIO0 pin powered by VDDPST1, with LP_UART_DTRN and the analog function XTAL_32K_P (positive 32 kHz crystal or oscillator signal).
10 XTAL_32K_N bidirectional GPIO1/LP_GPIO1 pin powered by VDDPST1, with LP_UART_DSRN, ADC1_CH0 and the analog function XTAL_32K_N (negative 32 kHz crystal or oscillator signal).
11 MTMS bidirectional GPIO2/LP_GPIO2 pin powered by VDDPST1 with JTAG MTMS, FSPIQ, ADC1_CH1, LP_UART_RTSN and LP_I2C_SDA; input enabled at and after reset, and a strapping pin.
12 MTDI bidirectional GPIO3/LP_GPIO3 pin powered by VDDPST1 with JTAG MTDI, ADC1_CH2, LP_UART_CTSN and LP_I2C_SCL; input enabled at and after reset, and a strapping pin for SDIO sampling edge control.
13 MTCK bidirectional GPIO4/LP_GPIO4 pin powered by VDDPST1 with JTAG MTCK, FSPIHD, ADC1_CH3 and LP_UART_RXD; input enabled with weak pull-up at reset.
14 MTDO bidirectional GPIO5/LP_GPIO5 pin powered by VDDPST1 with JTAG MTDO, FSPIWP, ADC1_CH4 and LP_UART_TXD; input enabled at and after reset.
15 GPIO6 bidirectional GPIO6/LP_GPIO6 pin powered by VDDPST1 with FSPICLK and ADC1_CH5; input enabled at and after reset.
16 GPIO7 bidirectional GPIO7 pin powered by VDDPST1 with SDIO_DATA1 and FSPID; input enabled at and after reset, and a strapping pin for JTAG signal source control.
17 GPIO8 bidirectional GPIO8 pin powered by VDDPST1 with SDIO_DATA0 and analog comparator input PAD_COMP0; input enabled after reset.
18 GPIO9 bidirectional GPIO9 pin powered by VDDPST1 with SDIO_CLK and analog comparator input PAD_COMP1; input enabled after reset.
19 GPIO10 bidirectional GPIO10 pin powered by VDDPST1 with SDIO_CMD and FSPICS0; input enabled after reset.
20 U0TXD bidirectional GPIO11 pin powered by VDDPST1 whose default function is UART0 transmit data; input and output enabled after reset.
21 U0RXD bidirectional GPIO12 pin powered by VDDPST1 whose default function is UART0 receive data; input enabled with weak pull-up at and after reset.
22 GPIO13 bidirectional GPIO13 pin powered by VDDPST2 with USB_D- (USB Serial/JTAG) and SDIO_DATA3; default drive strength 40 mA.
23 GPIO14 bidirectional GPIO14 pin powered by VDDPST2 with USB_D+ (USB Serial/JTAG) and SDIO_DATA2; default drive strength 40 mA and USB pull-up enabled by default.
24 VDDPST2 power_in Supply input for the HP digital and part of the analog pin power domains (HP IO).
25 SPICS1 bidirectional GPIO15 pin powered by VDD_SPI that is SPI chip select 1 used to access PSRAM (CE#); weak pull-up enabled at and after reset.
26 SPICS0 bidirectional GPIO16 pin powered by VDD_SPI that is SPI chip select 0 used to access flash (CS#); weak pull-up enabled at and after reset.
27 SPIQ bidirectional GPIO17 pin powered by VDD_SPI that is SPI MISO/SIO1 for flash/PSRAM; weak pull-up enabled at and after reset.
28 SPIWP bidirectional GPIO18 pin powered by VDD_SPI that is SPI write protect WP#/SIO2 for flash/PSRAM; weak pull-up enabled at and after reset.
29 VDD_SPI power_out Output supply for off-package flash (configurable as input or output) that can be used as GPIO19 only if flash is powered by an external supply.
30 SPIHD bidirectional GPIO20 pin powered by VDD_SPI that is SPI HOLD#/SIO3 for flash/PSRAM; weak pull-up enabled at and after reset.
31 SPICLK bidirectional GPIO21 pin powered by VDD_SPI that is the SPI clock (CLK) for flash/PSRAM; weak pull-up enabled at and after reset.
32 SPID bidirectional GPIO22 pin powered by VDD_SPI that is SPI MOSI/SIO0 for flash/PSRAM; weak pull-up enabled at and after reset.
33 GPIO23 bidirectional General-purpose IO pin powered by VDDPST3 with input enabled after reset.
34 GPIO24 bidirectional General-purpose IO pin powered by VDDPST3 with input enabled after reset.
35 GPIO25 bidirectional GPIO pin powered by VDDPST3 with input enabled at and after reset; strapping pin (floating by default) for SDIO sampling and driving clock edge control.
36 GPIO26 bidirectional GPIO pin powered by VDDPST3 with input enabled at and after reset; strapping pin (floating by default) for chip boot mode control.
37 GPIO27 bidirectional GPIO pin powered by VDDPST3 with weak pull-up enabled at and after reset; strapping pin (default pull-up, bit value 1) for boot mode and ROM message printing control.
38 GPIO28 bidirectional GPIO pin powered by VDDPST3 with weak pull-up at reset (depends on EFUSE_DIS_PAD_JTAG after reset); strapping pin (default pull-up, bit value 1) for chip boot mode control.
39 VDDPST3 power_in Supply input for the HP digital power domain (HP IO).
40 VDDA1 power_in Analog power domain supply input, 3.3 V.
41 VDDA2 power_in Analog power domain supply input, 3.3 V.
42 ANT_2G bidirectional 2.4 GHz RF input/output.
43 GND power_in External ground connection.
44 VDDA3 power_in Analog power domain supply input, 3.3 V.
45 VDDA4 power_in Analog power domain supply input, 3.3 V.
46 VDDA5 power_in Analog power domain supply input, 3.3 V.
47 GND power_in External ground connection.
48 ANT_5G bidirectional 5 GHz RF input/output.
49 GND power_in Exposed ground pad of the QFN48 package, shown as pin 49 GND in the pin layout.

Key specifications

Parameter Value
Manufacturer Espressif Systems
Package QFN-48(6x6)
Category Embedded Processors & Controllers
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Allowed input voltage (input power pins) -0.3 3.6 V 70
Storage temperature TSTORE -40 150 °C 70
Recommended input voltage VDDA1-VDDA8 3 3.3 3.6 V 70
Recommended input voltage VDDPST1, VDDPST3 3 3.3 3.6 V 70
Recommended input voltage VDD_SPI (as input) 3 3.3 3.6 V 70
Recommended input voltage VDDPST2 3 3.3 3.6 V 70
Cumulative input current IVDD 0.6 A 70
Internal weak pull-up resistor RPU 45 kΩ 71
Internal weak pull-down resistor RPD 45 kΩ 71
High-level input current IIH 50 nA 71
Low-level input current IIL 50 nA 71
VDD_SPI powered by VDDPST2 via RSPI series resistance RSPI 3 Ω VDD_SPI powered by VDDPST2 via RSPI for 3.3 V flash or PSRAM 71
ADC differential nonlinearity DNL -5 5 LSB 72
ADC integral nonlinearity INL -5 5 LSB 72
ADC sampling rate 2000 kSPS 72
ADC total error -10 10 mV ATTEN0, effective measurement range of 0 ~ 1000 72
ADC total error -12 12 mV ATTEN2, effective measurement range of 0 ~ 1900 72
ADC total error -15 15 mV ATTEN3, effective measurement range of 0 ~ 3300 72
Flash power supply voltage (1.8 V) VCC 1.65 1.8 2 V 74
Flash power supply voltage (3.3 V) VCC 2.7 3.3 3.6 V 74
Flash maximum clock frequency FC 80 MHz 74
Flash program/erase cycles 100000 cycles 74
Flash data retention time TRET 20 years 74
Flash page program time TPP 0.8 5 ms 75
Flash sector erase time (4 KB) TSE 70 500 ms 75
Flash block erase time (32 KB) TBE1 0.2 2 s 75
Flash block erase time (64 KB) TBE2 0.3 3 s 75
PSRAM power supply voltage (1.8 V) VCC 1.62 1.8 1.98 V 75
PSRAM power supply voltage (3.3 V) VCC 2.7 3.3 3.6 V 75
PSRAM maximum clock frequency FC 80 MHz 75
ESD HBM (Human Body Model) rating -2000 2000 V HBM (Human Body Mode), JS-001 75
ESD CDM (Charge Device Model) rating -1000 1000 V CDM (Charge Device Mode), JS-002 75
Latch-up current trigger -200 200 mA JESD78 current trigger 75
Bluetooth LE sensitivity, 1 Mbps -98.5 dBm @30.8% PER 84
Bluetooth LE maximum received signal, 1 Mbps 5 dBm @30.8% PER 84
802.15.4 sensitivity, 250 Kbps -104 dBm @1% PER 87
802.15.4 maximum received signal, 250 Kbps 5 dBm @1% PER 87

CAD (KiCad official)

  • Symbol: ESP32-C5HR8
  • Footprint: Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mm
  • 3D model: QFN-48(6x6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: esp32-c5hr8-etched.step / esp32-c5hr8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); esp32-c5hr8.step / esp32-c5hr8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Espressif Systems datasheet (96 pp, sha256 e3cb7ad57b6fdf16, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF