component
ESP32-C5HR8
Public Made by Adomby adom
Espressif Systems Microcontrollers (MCU/MPU/SOC), QFN-48(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
ESP32-C5HR8
Espressif Systems · Microcontrollers (MCU/MPU/SOC) · QFN-48(6x6)
ESP32-C5HR8 from Espressif Systems, in a QFN-48(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDDA6 | power_in | Analog power domain supply input, 3.3 V. |
| 2 | GND | power_in | External ground connection. |
| 3 | VDDA7 | power_in | Analog power domain supply input, 3.3 V. |
| 4 | XTAL_N | passive | Negative side of the differential external clock input/output connected to the chip's crystal or oscillator. |
| 5 | XTAL_P | passive | Positive side of the differential external clock input/output connected to the chip's crystal or oscillator. |
| 6 | VDDA8 | power_in | Analog power domain supply input, 3.3 V. |
| 7 | CHIP_PU | input | Chip enable and reset: high turns the chip on, low powers it off, powered by VDDPST1; must not be left floating and needs at least 50 us low (tRST) to reset. |
| 8 | VDDPST1 | power_in | Supply input for the LP digital power domain and the LP IO pins. |
| 9 | XTAL_32K_P | bidirectional | GPIO0/LP_GPIO0 pin powered by VDDPST1, with LP_UART_DTRN and the analog function XTAL_32K_P (positive 32 kHz crystal or oscillator signal). |
| 10 | XTAL_32K_N | bidirectional | GPIO1/LP_GPIO1 pin powered by VDDPST1, with LP_UART_DSRN, ADC1_CH0 and the analog function XTAL_32K_N (negative 32 kHz crystal or oscillator signal). |
| 11 | MTMS | bidirectional | GPIO2/LP_GPIO2 pin powered by VDDPST1 with JTAG MTMS, FSPIQ, ADC1_CH1, LP_UART_RTSN and LP_I2C_SDA; input enabled at and after reset, and a strapping pin. |
| 12 | MTDI | bidirectional | GPIO3/LP_GPIO3 pin powered by VDDPST1 with JTAG MTDI, ADC1_CH2, LP_UART_CTSN and LP_I2C_SCL; input enabled at and after reset, and a strapping pin for SDIO sampling edge control. |
| 13 | MTCK | bidirectional | GPIO4/LP_GPIO4 pin powered by VDDPST1 with JTAG MTCK, FSPIHD, ADC1_CH3 and LP_UART_RXD; input enabled with weak pull-up at reset. |
| 14 | MTDO | bidirectional | GPIO5/LP_GPIO5 pin powered by VDDPST1 with JTAG MTDO, FSPIWP, ADC1_CH4 and LP_UART_TXD; input enabled at and after reset. |
| 15 | GPIO6 | bidirectional | GPIO6/LP_GPIO6 pin powered by VDDPST1 with FSPICLK and ADC1_CH5; input enabled at and after reset. |
| 16 | GPIO7 | bidirectional | GPIO7 pin powered by VDDPST1 with SDIO_DATA1 and FSPID; input enabled at and after reset, and a strapping pin for JTAG signal source control. |
| 17 | GPIO8 | bidirectional | GPIO8 pin powered by VDDPST1 with SDIO_DATA0 and analog comparator input PAD_COMP0; input enabled after reset. |
| 18 | GPIO9 | bidirectional | GPIO9 pin powered by VDDPST1 with SDIO_CLK and analog comparator input PAD_COMP1; input enabled after reset. |
| 19 | GPIO10 | bidirectional | GPIO10 pin powered by VDDPST1 with SDIO_CMD and FSPICS0; input enabled after reset. |
| 20 | U0TXD | bidirectional | GPIO11 pin powered by VDDPST1 whose default function is UART0 transmit data; input and output enabled after reset. |
| 21 | U0RXD | bidirectional | GPIO12 pin powered by VDDPST1 whose default function is UART0 receive data; input enabled with weak pull-up at and after reset. |
| 22 | GPIO13 | bidirectional | GPIO13 pin powered by VDDPST2 with USB_D- (USB Serial/JTAG) and SDIO_DATA3; default drive strength 40 mA. |
| 23 | GPIO14 | bidirectional | GPIO14 pin powered by VDDPST2 with USB_D+ (USB Serial/JTAG) and SDIO_DATA2; default drive strength 40 mA and USB pull-up enabled by default. |
| 24 | VDDPST2 | power_in | Supply input for the HP digital and part of the analog pin power domains (HP IO). |
| 25 | SPICS1 | bidirectional | GPIO15 pin powered by VDD_SPI that is SPI chip select 1 used to access PSRAM (CE#); weak pull-up enabled at and after reset. |
| 26 | SPICS0 | bidirectional | GPIO16 pin powered by VDD_SPI that is SPI chip select 0 used to access flash (CS#); weak pull-up enabled at and after reset. |
| 27 | SPIQ | bidirectional | GPIO17 pin powered by VDD_SPI that is SPI MISO/SIO1 for flash/PSRAM; weak pull-up enabled at and after reset. |
| 28 | SPIWP | bidirectional | GPIO18 pin powered by VDD_SPI that is SPI write protect WP#/SIO2 for flash/PSRAM; weak pull-up enabled at and after reset. |
| 29 | VDD_SPI | power_out | Output supply for off-package flash (configurable as input or output) that can be used as GPIO19 only if flash is powered by an external supply. |
| 30 | SPIHD | bidirectional | GPIO20 pin powered by VDD_SPI that is SPI HOLD#/SIO3 for flash/PSRAM; weak pull-up enabled at and after reset. |
| 31 | SPICLK | bidirectional | GPIO21 pin powered by VDD_SPI that is the SPI clock (CLK) for flash/PSRAM; weak pull-up enabled at and after reset. |
| 32 | SPID | bidirectional | GPIO22 pin powered by VDD_SPI that is SPI MOSI/SIO0 for flash/PSRAM; weak pull-up enabled at and after reset. |
| 33 | GPIO23 | bidirectional | General-purpose IO pin powered by VDDPST3 with input enabled after reset. |
| 34 | GPIO24 | bidirectional | General-purpose IO pin powered by VDDPST3 with input enabled after reset. |
| 35 | GPIO25 | bidirectional | GPIO pin powered by VDDPST3 with input enabled at and after reset; strapping pin (floating by default) for SDIO sampling and driving clock edge control. |
| 36 | GPIO26 | bidirectional | GPIO pin powered by VDDPST3 with input enabled at and after reset; strapping pin (floating by default) for chip boot mode control. |
| 37 | GPIO27 | bidirectional | GPIO pin powered by VDDPST3 with weak pull-up enabled at and after reset; strapping pin (default pull-up, bit value 1) for boot mode and ROM message printing control. |
| 38 | GPIO28 | bidirectional | GPIO pin powered by VDDPST3 with weak pull-up at reset (depends on EFUSE_DIS_PAD_JTAG after reset); strapping pin (default pull-up, bit value 1) for chip boot mode control. |
| 39 | VDDPST3 | power_in | Supply input for the HP digital power domain (HP IO). |
| 40 | VDDA1 | power_in | Analog power domain supply input, 3.3 V. |
| 41 | VDDA2 | power_in | Analog power domain supply input, 3.3 V. |
| 42 | ANT_2G | bidirectional | 2.4 GHz RF input/output. |
| 43 | GND | power_in | External ground connection. |
| 44 | VDDA3 | power_in | Analog power domain supply input, 3.3 V. |
| 45 | VDDA4 | power_in | Analog power domain supply input, 3.3 V. |
| 46 | VDDA5 | power_in | Analog power domain supply input, 3.3 V. |
| 47 | GND | power_in | External ground connection. |
| 48 | ANT_5G | bidirectional | 5 GHz RF input/output. |
| 49 | GND | power_in | Exposed ground pad of the QFN48 package, shown as pin 49 GND in the pin layout. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | QFN-48(6x6) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Allowed input voltage (input power pins) | -0.3 | 3.6 | V | 70 | |||
| Storage temperature | TSTORE | -40 | 150 | °C | 70 | ||
| Recommended input voltage VDDA1-VDDA8 | 3 | 3.3 | 3.6 | V | 70 | ||
| Recommended input voltage VDDPST1, VDDPST3 | 3 | 3.3 | 3.6 | V | 70 | ||
| Recommended input voltage VDD_SPI (as input) | 3 | 3.3 | 3.6 | V | 70 | ||
| Recommended input voltage VDDPST2 | 3 | 3.3 | 3.6 | V | 70 | ||
| Cumulative input current | IVDD | 0.6 | A | 70 | |||
| Internal weak pull-up resistor | RPU | 45 | kΩ | 71 | |||
| Internal weak pull-down resistor | RPD | 45 | kΩ | 71 | |||
| High-level input current | IIH | 50 | nA | 71 | |||
| Low-level input current | IIL | 50 | nA | 71 | |||
| VDD_SPI powered by VDDPST2 via RSPI series resistance | RSPI | 3 | Ω | VDD_SPI powered by VDDPST2 via RSPI for 3.3 V flash or PSRAM | 71 | ||
| ADC differential nonlinearity | DNL | -5 | 5 | LSB | 72 | ||
| ADC integral nonlinearity | INL | -5 | 5 | LSB | 72 | ||
| ADC sampling rate | 2000 | kSPS | 72 | ||||
| ADC total error | -10 | 10 | mV | ATTEN0, effective measurement range of 0 ~ 1000 | 72 | ||
| ADC total error | -12 | 12 | mV | ATTEN2, effective measurement range of 0 ~ 1900 | 72 | ||
| ADC total error | -15 | 15 | mV | ATTEN3, effective measurement range of 0 ~ 3300 | 72 | ||
| Flash power supply voltage (1.8 V) | VCC | 1.65 | 1.8 | 2 | V | 74 | |
| Flash power supply voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | 74 | |
| Flash maximum clock frequency | FC | 80 | MHz | 74 | |||
| Flash program/erase cycles | 100000 | cycles | 74 | ||||
| Flash data retention time | TRET | 20 | years | 74 | |||
| Flash page program time | TPP | 0.8 | 5 | ms | 75 | ||
| Flash sector erase time (4 KB) | TSE | 70 | 500 | ms | 75 | ||
| Flash block erase time (32 KB) | TBE1 | 0.2 | 2 | s | 75 | ||
| Flash block erase time (64 KB) | TBE2 | 0.3 | 3 | s | 75 | ||
| PSRAM power supply voltage (1.8 V) | VCC | 1.62 | 1.8 | 1.98 | V | 75 | |
| PSRAM power supply voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | 75 | |
| PSRAM maximum clock frequency | FC | 80 | MHz | 75 | |||
| ESD HBM (Human Body Model) rating | -2000 | 2000 | V | HBM (Human Body Mode), JS-001 | 75 | ||
| ESD CDM (Charge Device Model) rating | -1000 | 1000 | V | CDM (Charge Device Mode), JS-002 | 75 | ||
| Latch-up current trigger | -200 | 200 | mA | JESD78 current trigger | 75 | ||
| Bluetooth LE sensitivity, 1 Mbps | -98.5 | dBm | @30.8% PER | 84 | |||
| Bluetooth LE maximum received signal, 1 Mbps | 5 | dBm | @30.8% PER | 84 | |||
| 802.15.4 sensitivity, 250 Kbps | -104 | dBm | @1% PER | 87 | |||
| 802.15.4 maximum received signal, 250 Kbps | 5 | dBm | @1% PER | 87 |
CAD (KiCad official)
- Symbol:
ESP32-C5HR8 - Footprint:
Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mm - 3D model: QFN-48(6x6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
esp32-c5hr8-etched.step/esp32-c5hr8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);esp32-c5hr8.step/esp32-c5hr8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Espressif Systems datasheet (96 pp, sha256
e3cb7ad57b6fdf16, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).