main
Ray
esp32-c5-wroom-1-n16r8: CAD wording names Espressif's KiCad libraries, not KiCad official
dfd96ba
ESP32-C5-WROOM-1-N16R8
Espressif Systems · RF and Wireless · 28-SMD Module
ESP32-C5-WROOM-1-N16R8 from Espressif Systems, in a 28-SMD Module. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from Espressif's KiCad libraries (CC-BY-SA 4.0); the 3D model is Espressif Systems's.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin of the module. |
| 2 | 3V3 | power_in | Module power supply input; Table 6-2 gives VDD33 of 3.0 V minimum, 3.3 V typical and 3.6 V maximum. |
| 3 | EN | input | High level enables the chip and low level powers it off; the pin must not be left floating. |
| 4 | IO2 | bidirectional | GPIO2 with alternate functions MTMS, LP_GPIO2, LP_UART_RTSN, LP_I2C_SDA, ADC1_CH1 and FSPIQ. |
| 5 | IO3 | bidirectional | GPIO3 with alternate functions MTDI, LP_GPIO3, LP_UART_CTSN, LP_I2C_SCL and ADC1_CH2. |
| 6 | IO0 | bidirectional | GPIO0 with alternate functions XTAL_32K_P, LP_GPIO0 and LP_UART_DTRN. |
| 7 | IO1 | bidirectional | GPIO1 with alternate functions XTAL_32K_N, LP_GPIO1, LP_UART_DSRN and ADC1_CH0. |
| 8 | IO6 | bidirectional | GPIO6 with alternate functions LP_GPIO6, ADC1_CH5 and FSPICLK. |
| 9 | IO7 | bidirectional | GPIO7 with alternate functions FSPID and SDIO_DATA1; it is also a JTAG signal source strapping pin. |
| 10 | IO8 | bidirectional | GPIO8 with alternate functions PAD_COMP0 and SDIO_DATA0. |
| 11 | IO9 | bidirectional | GPIO9 with alternate functions PAD_COMP1 and SDIO_CLK. |
| 12 | IO10 | bidirectional | GPIO10 with alternate functions FSPICS0 and SDIO_CMD. |
| 13 | IO13 | bidirectional | GPIO13 with alternate functions USB_D- and SDIO_DATA3. |
| 14 | IO14 | bidirectional | GPIO14 with alternate functions USB_D+ and SDIO_DATA2. |
| 15 | IO28 | bidirectional | GPIO28, a chip boot mode strapping pin that is pulled up to 1 by default. |
| 16 | IO5 | bidirectional | GPIO5 with alternate functions MTDO, LP_GPIO5, LP_UART_TXD, ADC1_CH4 and FSPIWP. |
| 17 | IO4 | bidirectional | GPIO4 with alternate functions MTCK, LP_GPIO4, LP_UART_RXD, ADC1_CH3 and FSPIHD. |
| 18 | IO27 | bidirectional | GPIO27, a chip boot mode and ROM message strapping pin that is pulled up to 1 by default. |
| 19 | NC/IO15 | bidirectional | Used as SPICS1 for the in-package SPI PSRAM in modules with PSRAM and cannot be used for other functions; otherwise usable as GPIO15. |
| 20 | NC | unconnected | No connection. |
| 21 | IO23 | bidirectional | GPIO23. |
| 22 | NC | unconnected | No connection. |
| 23 | IO24 | bidirectional | GPIO24. |
| 24 | RX0 | bidirectional | UART0 receive pin U0RXD, also usable as GPIO12. |
| 25 | TX0 | bidirectional | UART0 transmit pin U0TXD, also usable as GPIO11. |
| 26 | IO25 | bidirectional | GPIO25, a SDIO sampling and driving clock edge strapping pin with no default pull. |
| 27 | IO26 | bidirectional | GPIO26, a chip boot mode strapping pin with no default pull. |
| 28 | GND | power_in | Ground reference pin of the module. |
| 29 | EPAD | power_in | Exposed ground pad; soldering it to the base board ground is optional but improves thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | 28-SMD Module |
| Category | RF and Wireless |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VDD33 | -0.3 | 3.6 | V | 32 | ||
| Power supply voltage | VDD33 | 3 | 3.3 | 3.6 | V | 32 | |
| Current delivered by external power supply | IV DD | 0.6 | A | 32 | |||
| Operating ambient temperature | TA | -40 | 85 | °C | 32 | ||
| Flash power supply voltage (1.8 V) | VCC | 1.65 | 1.8 | 2 | V | 35 | |
| Flash power supply voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | 35 | |
| Flash maximum clock frequency | FC | 80 | MHz | 35 | |||
| Flash program/erase cycles | 100000 | cycles | 35 | ||||
| Flash data retention time | TRET | 20 | years | 35 | |||
| PSRAM power supply voltage (1.8 V) | VCC | 1.62 | 1.8 | 1.98 | V | 35 | |
| PSRAM power supply voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | 35 | |
| PSRAM maximum clock frequency | FC | 80 | MHz | 35 | |||
| High-level input current | IIH | 50 | nA | 32 | |||
| Low-level input current | IIL | 50 | nA | 32 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Solder: Sn-Ag-Cu (SAC305) lead-free solder Temperature (°C) | 56 |
CAD (land: Espressif; 3D: manufacturer)
- Symbol:
ESP32-C5-WROOM-1-N16R8 - Footprint:
PCM_Espressif:ESP32-C5-WROOM-1 - 3D model: 28-SMD Module (Espressif KiCad libraries, STEP)
- 3D model files:
esp32-c5-wroom-1-n16r8-etched.step/esp32-c5-wroom-1-n16r8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);esp32-c5-wroom-1-n16r8.step/esp32-c5-wroom-1-n16r8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Espressif Systems datasheet (62 pp, sha256
fa50f329237226d0, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: Espressif's KiCad libraries (CC-BY-SA 4.0); 3D: Espressif Systems's model.
# ESP32-C5-WROOM-1-N16R8
**Espressif Systems** · RF and Wireless · 28-SMD Module
ESP32-C5-WROOM-1-N16R8 from Espressif Systems, in a 28-SMD Module. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from Espressif's KiCad libraries (CC-BY-SA 4.0); the 3D model is Espressif Systems's.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin of the module. |
| 2 | 3V3 | power_in | Module power supply input; Table 6-2 gives VDD33 of 3.0 V minimum, 3.3 V typical and 3.6 V maximum. |
| 3 | EN | input | High level enables the chip and low level powers it off; the pin must not be left floating. |
| 4 | IO2 | bidirectional | GPIO2 with alternate functions MTMS, LP_GPIO2, LP_UART_RTSN, LP_I2C_SDA, ADC1_CH1 and FSPIQ. |
| 5 | IO3 | bidirectional | GPIO3 with alternate functions MTDI, LP_GPIO3, LP_UART_CTSN, LP_I2C_SCL and ADC1_CH2. |
| 6 | IO0 | bidirectional | GPIO0 with alternate functions XTAL_32K_P, LP_GPIO0 and LP_UART_DTRN. |
| 7 | IO1 | bidirectional | GPIO1 with alternate functions XTAL_32K_N, LP_GPIO1, LP_UART_DSRN and ADC1_CH0. |
| 8 | IO6 | bidirectional | GPIO6 with alternate functions LP_GPIO6, ADC1_CH5 and FSPICLK. |
| 9 | IO7 | bidirectional | GPIO7 with alternate functions FSPID and SDIO_DATA1; it is also a JTAG signal source strapping pin. |
| 10 | IO8 | bidirectional | GPIO8 with alternate functions PAD_COMP0 and SDIO_DATA0. |
| 11 | IO9 | bidirectional | GPIO9 with alternate functions PAD_COMP1 and SDIO_CLK. |
| 12 | IO10 | bidirectional | GPIO10 with alternate functions FSPICS0 and SDIO_CMD. |
| 13 | IO13 | bidirectional | GPIO13 with alternate functions USB_D- and SDIO_DATA3. |
| 14 | IO14 | bidirectional | GPIO14 with alternate functions USB_D+ and SDIO_DATA2. |
| 15 | IO28 | bidirectional | GPIO28, a chip boot mode strapping pin that is pulled up to 1 by default. |
| 16 | IO5 | bidirectional | GPIO5 with alternate functions MTDO, LP_GPIO5, LP_UART_TXD, ADC1_CH4 and FSPIWP. |
| 17 | IO4 | bidirectional | GPIO4 with alternate functions MTCK, LP_GPIO4, LP_UART_RXD, ADC1_CH3 and FSPIHD. |
| 18 | IO27 | bidirectional | GPIO27, a chip boot mode and ROM message strapping pin that is pulled up to 1 by default. |
| 19 | NC/IO15 | bidirectional | Used as SPICS1 for the in-package SPI PSRAM in modules with PSRAM and cannot be used for other functions; otherwise usable as GPIO15. |
| 20 | NC | unconnected | No connection. |
| 21 | IO23 | bidirectional | GPIO23. |
| 22 | NC | unconnected | No connection. |
| 23 | IO24 | bidirectional | GPIO24. |
| 24 | RX0 | bidirectional | UART0 receive pin U0RXD, also usable as GPIO12. |
| 25 | TX0 | bidirectional | UART0 transmit pin U0TXD, also usable as GPIO11. |
| 26 | IO25 | bidirectional | GPIO25, a SDIO sampling and driving clock edge strapping pin with no default pull. |
| 27 | IO26 | bidirectional | GPIO26, a chip boot mode strapping pin with no default pull. |
| 28 | GND | power_in | Ground reference pin of the module. |
| 29 | EPAD | power_in | Exposed ground pad; soldering it to the base board ground is optional but improves thermal performance. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | 28-SMD Module |
| Category | RF and Wireless |
| Pins | 29 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VDD33 | -0.3 | | 3.6 | V | | 32 |
| Power supply voltage | VDD33 | 3 | 3.3 | 3.6 | V | | 32 |
| Current delivered by external power supply | IV DD | 0.6 | | | A | | 32 |
| Operating ambient temperature | TA | -40 | | 85 | °C | | 32 |
| Flash power supply voltage (1.8 V) | VCC | 1.65 | 1.8 | 2 | V | | 35 |
| Flash power supply voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | | 35 |
| Flash maximum clock frequency | FC | 80 | | | MHz | | 35 |
| Flash program/erase cycles | | 100000 | | | cycles | | 35 |
| Flash data retention time | TRET | 20 | | | years | | 35 |
| PSRAM power supply voltage (1.8 V) | VCC | 1.62 | 1.8 | 1.98 | V | | 35 |
| PSRAM power supply voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | | 35 |
| PSRAM maximum clock frequency | FC | 80 | | | MHz | | 35 |
| High-level input current | IIH | | | 50 | nA | | 32 |
| Low-level input current | IIL | | | 50 | nA | | 32 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Solder: Sn-Ag-Cu (SAC305) lead-free solder Temperature (°C) | 56 |
## CAD (land: Espressif; 3D: manufacturer)
- Symbol: `ESP32-C5-WROOM-1-N16R8`
- Footprint: `PCM_Espressif:ESP32-C5-WROOM-1`
- 3D model: 28-SMD Module (Espressif KiCad libraries, STEP)
- 3D model files: `esp32-c5-wroom-1-n16r8-etched.step` / `esp32-c5-wroom-1-n16r8-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `esp32-c5-wroom-1-n16r8.step` / `esp32-c5-wroom-1-n16r8.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Espressif Systems datasheet](https://documentation.espressif.com/esp32-c5-wroom-1_wroom-1u_datasheet_en.pdf) (62 pp, sha256 `fa50f329237226d0`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: Espressif's KiCad libraries (CC-BY-SA 4.0); 3D: Espressif Systems's model.
[Datasheet PDF](docs/esp32-c5-wroom-1-n16r8-datasheet.pdf)