main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20251024
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers esp32-c5-wroom-1-n16r8: viewers · Ray
esp32-c5-wroom-1-n16r8-etched.glb esp32-c5-wroom-1-n16r8: factory component page (tier=mfr) · Ray
esp32-c5-wroom-1-n16r8-etched.step esp32-c5-wroom-1-n16r8: factory component page (tier=mfr) · Ray
esp32-c5-wroom-1-n16r8.glb Publish 0.1.0 · Ray
esp32-c5-wroom-1-n16r8.kicad_mod Publish 0.1.0 · Ray
esp32-c5-wroom-1-n16r8.kicad_sym Publish 0.1.0 · Ray
esp32-c5-wroom-1-n16r8.lbr Publish 0.1.0 · Ray
esp32-c5-wroom-1-n16r8.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md esp32-c5-wroom-1-n16r8: CAD wording names Espressif's KiCad libraries, not KiCad official · Ray
verification.json Verified: Published by the parts factory: tier mfr, 29 pins · Ray

ESP32-C5-WROOM-1-N16R8

Espressif Systems · RF and Wireless · 28-SMD Module

ESP32-C5-WROOM-1-N16R8 from Espressif Systems, in a 28-SMD Module. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from Espressif's KiCad libraries (CC-BY-SA 4.0); the 3D model is Espressif Systems's.

Pinout

Pin Name Type Function
1 GND power_in Ground reference pin of the module.
2 3V3 power_in Module power supply input; Table 6-2 gives VDD33 of 3.0 V minimum, 3.3 V typical and 3.6 V maximum.
3 EN input High level enables the chip and low level powers it off; the pin must not be left floating.
4 IO2 bidirectional GPIO2 with alternate functions MTMS, LP_GPIO2, LP_UART_RTSN, LP_I2C_SDA, ADC1_CH1 and FSPIQ.
5 IO3 bidirectional GPIO3 with alternate functions MTDI, LP_GPIO3, LP_UART_CTSN, LP_I2C_SCL and ADC1_CH2.
6 IO0 bidirectional GPIO0 with alternate functions XTAL_32K_P, LP_GPIO0 and LP_UART_DTRN.
7 IO1 bidirectional GPIO1 with alternate functions XTAL_32K_N, LP_GPIO1, LP_UART_DSRN and ADC1_CH0.
8 IO6 bidirectional GPIO6 with alternate functions LP_GPIO6, ADC1_CH5 and FSPICLK.
9 IO7 bidirectional GPIO7 with alternate functions FSPID and SDIO_DATA1; it is also a JTAG signal source strapping pin.
10 IO8 bidirectional GPIO8 with alternate functions PAD_COMP0 and SDIO_DATA0.
11 IO9 bidirectional GPIO9 with alternate functions PAD_COMP1 and SDIO_CLK.
12 IO10 bidirectional GPIO10 with alternate functions FSPICS0 and SDIO_CMD.
13 IO13 bidirectional GPIO13 with alternate functions USB_D- and SDIO_DATA3.
14 IO14 bidirectional GPIO14 with alternate functions USB_D+ and SDIO_DATA2.
15 IO28 bidirectional GPIO28, a chip boot mode strapping pin that is pulled up to 1 by default.
16 IO5 bidirectional GPIO5 with alternate functions MTDO, LP_GPIO5, LP_UART_TXD, ADC1_CH4 and FSPIWP.
17 IO4 bidirectional GPIO4 with alternate functions MTCK, LP_GPIO4, LP_UART_RXD, ADC1_CH3 and FSPIHD.
18 IO27 bidirectional GPIO27, a chip boot mode and ROM message strapping pin that is pulled up to 1 by default.
19 NC/IO15 bidirectional Used as SPICS1 for the in-package SPI PSRAM in modules with PSRAM and cannot be used for other functions; otherwise usable as GPIO15.
20 NC unconnected No connection.
21 IO23 bidirectional GPIO23.
22 NC unconnected No connection.
23 IO24 bidirectional GPIO24.
24 RX0 bidirectional UART0 receive pin U0RXD, also usable as GPIO12.
25 TX0 bidirectional UART0 transmit pin U0TXD, also usable as GPIO11.
26 IO25 bidirectional GPIO25, a SDIO sampling and driving clock edge strapping pin with no default pull.
27 IO26 bidirectional GPIO26, a chip boot mode strapping pin with no default pull.
28 GND power_in Ground reference pin of the module.
29 EPAD power_in Exposed ground pad; soldering it to the base board ground is optional but improves thermal performance.

Key specifications

Parameter Value
Manufacturer Espressif Systems
Package 28-SMD Module
Category RF and Wireless
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage VDD33 -0.3 3.6 V 32
Power supply voltage VDD33 3 3.3 3.6 V 32
Current delivered by external power supply IV DD 0.6 A 32
Operating ambient temperature TA -40 85 °C 32
Flash power supply voltage (1.8 V) VCC 1.65 1.8 2 V 35
Flash power supply voltage (3.3 V) VCC 2.7 3.3 3.6 V 35
Flash maximum clock frequency FC 80 MHz 35
Flash program/erase cycles 100000 cycles 35
Flash data retention time TRET 20 years 35
PSRAM power supply voltage (1.8 V) VCC 1.62 1.8 1.98 V 35
PSRAM power supply voltage (3.3 V) VCC 2.7 3.3 3.6 V 35
PSRAM maximum clock frequency FC 80 MHz 35
High-level input current IIH 50 nA 32
Low-level input current IIL 50 nA 32

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Solder: Sn-Ag-Cu (SAC305) lead-free solder Temperature (°C) 56

CAD (land: Espressif; 3D: manufacturer)

  • Symbol: ESP32-C5-WROOM-1-N16R8
  • Footprint: PCM_Espressif:ESP32-C5-WROOM-1
  • 3D model: 28-SMD Module (Espressif KiCad libraries, STEP)
  • 3D model files: esp32-c5-wroom-1-n16r8-etched.step / esp32-c5-wroom-1-n16r8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); esp32-c5-wroom-1-n16r8.step / esp32-c5-wroom-1-n16r8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Espressif Systems datasheet (62 pp, sha256 fa50f329237226d0, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: Espressif's KiCad libraries (CC-BY-SA 4.0); 3D: Espressif Systems's model.

Datasheet PDF