main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ep53f8qi: viewers · Ray
ep53f8qi-etched.glb Publish 0.1.0 · Ray
ep53f8qi-etched.step ep53f8qi: factory component page (tier=lcsc) · Ray
ep53f8qi-hero.glb ep53f8qi: hero GLB from the etched model (keeps the MPN mark) · Ray
ep53f8qi-hero.overlay.json Publish 0.1.0 · Ray
ep53f8qi.glb Publish 0.1.0 · Ray
ep53f8qi.kicad_mod Publish 0.1.0 · Ray
ep53f8qi.kicad_sym Publish 0.1.0 · Ray
ep53f8qi.lbr Publish 0.1.0 · Ray
ep53f8qi.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

EP53F8QI

Intel/Altera · Power Modules · QFN-16(3x3)

EP53F8QI from Intel/Altera, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC(SW) unconnected No connect, internally tied to the switching node; must not be connected to any external signal, ground or voltage, but must be soldered to the PCB.
2 PGND power_in Input/Output power ground; connect to the ground electrode of the input and output filter capacitors.
3 PGND power_in Input/Output power ground; connect to the ground electrode of the input and output filter capacitors.
4 AVIN2 power_in Analog input voltage; connect to AVIN1 only.
5 VFB input Feedback pin for external voltage divider setting the output voltage; use 237 kΩ, 1% or better for the upper resistor.
6 NC unconnected No connect.
7 VOUT power_out Voltage and power output; connect to output capacitor(s).
8 VOUT power_out Voltage and power output; connect to output capacitor(s).
9 AGND power_in Analog ground for the controller circuits.
10 AVIN1 power_in Analog voltage input for the controller circuits; connect to PVIN through a 10Ω resistor, with a 1 µF capacitor to AGND, and connect AVIN2 to this pin.
11 POK output Open-drain power OK output with 5 mA sink capability; high when VOUT is within 92% to 111% of the set value.
12 ENABLE input Logic high enables the output and starts soft start, logic low disables and discharges the output; must not be left floating.
13 PVIN power_in Input power supply (2.4 V to 5.5 V recommended); decouple with input capacitor(s) to PGND.
14 PVIN power_in Input power supply (2.4 V to 5.5 V recommended); decouple with input capacitor(s) to PGND.
15 NC(SW) unconnected No connect, internally tied to the switching node; must not be connected to any external signal, ground or voltage, but must be soldered to the PCB.
16 NC(SW) unconnected No connect, internally tied to the switching node; must not be connected to any external signal, ground or voltage, but must be soldered to the PCB.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Intel/Altera
Package QFN-16(3x3)
Category Power Management
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltages on PVIN, AVIN, VOUT -0.3 6.5 V 3
Voltages on ENABLE, POK -0.3 V max printed as VIN 3
Voltage on VFB -0.3 2.7 V 3
Maximum Operating Junction Temperature 150 °C 4
Ambient Operating Range -40 85 °C 4
Storage Temperature Range -65 150 °C 4
Reflow Peak Body Temperature 260 °C 10 Sec, MSL3 JEDEC J-STD-020A 4
HBM ESD -2000 2000 V Human Body Model 4
CDM ESD -500 500 V Charged Device Model 4
Input Voltage Range VIN 2.4 5.5 V 4
Output Voltage Range VOUT 0.6 V max printed as VIN - VDO 4
Output Current ILOAD 0 1500 mA 4
Operating Ambient Temperature Range TA -40 85 °C 4
Operating Junction Temperature TJ -40 125 °C 4
Thermal Resistance Junction to Ambient θJA 55 °C/W 0 LFM, 2 oz copper board 4
Thermal Shutdown TSD 155 °C Junction temperature 4
Thermal Shutdown Hysteresis TSDH 15 °C 4
Operating Input Voltage VIN 2.4 5.5 V 5
VFB Voltage Initial Accuracy VFB 0.588 0.6 0.612 V TA = 25 °C; VIN = 5V; ILOAD = 100 mA 5
VOUT Rise Time TRISE 0.78 1.2 1.62 mS From time ENABLE goes high 5
VFB, ENABLE Pin Input Current -40 40 nA -40°C ≤ TA ≤ +85°C 5
ENABLE Voltage Threshold Logic Low 0 0.4 V 5
ENABLE Voltage Threshold Logic High VVFB 1.4 V Logic High; max printed as VIN 5
POK Low Voltage 0.15 0.4 V ISINK = 5 mA, -40°C ≤ TA ≤ +85°C 6
POK Pin VOH Leakage Current 500 nA POK High, -40°C ≤ TA ≤ +85°C 6
Current Limit Threshold 2 3.2 A 2.4 V ≤ VIN ≤ 5.5 V, -40°C ≤ TA ≤ +85°C 6
Dropout Resistance 250 360 mΩ 6
Shutdown Current 14 µA ENABLE Low 6
Under Voltage Lock-Out VIN Rising VUVLOR 2.2 V 5
Line Regulation 0.31 %/V 2.4 V ≤ VIN ≤ 5.5V 5
Load Regulation 0.42 %/A ILOAD = 0 to 1.5A 5
Temperature Variation 0.0012 %/°C -40°C ≤ TA ≤ +85°C 5
Operating Frequency FOSC 4 MHz 6

CAD (KiCad official)

  • Symbol: EP53F8QI
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: ep53f8qi-etched.step / ep53f8qi-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ep53f8qi.step / ep53f8qi.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Intel/Altera datasheet (18 pp, sha256 ee774ae9bf97fd5a, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF