component
EP53F8QI
Public Made by Adomby adom
Intel/Altera Power Modules, QFN-16(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownEP53F8QI
Intel/Altera · Power Modules · QFN-16(3x3)
EP53F8QI from Intel/Altera, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC(SW) | unconnected | No connect, internally tied to the switching node; must not be connected to any external signal, ground or voltage, but must be soldered to the PCB. |
| 2 | PGND | power_in | Input/Output power ground; connect to the ground electrode of the input and output filter capacitors. |
| 3 | PGND | power_in | Input/Output power ground; connect to the ground electrode of the input and output filter capacitors. |
| 4 | AVIN2 | power_in | Analog input voltage; connect to AVIN1 only. |
| 5 | VFB | input | Feedback pin for external voltage divider setting the output voltage; use 237 kΩ, 1% or better for the upper resistor. |
| 6 | NC | unconnected | No connect. |
| 7 | VOUT | power_out | Voltage and power output; connect to output capacitor(s). |
| 8 | VOUT | power_out | Voltage and power output; connect to output capacitor(s). |
| 9 | AGND | power_in | Analog ground for the controller circuits. |
| 10 | AVIN1 | power_in | Analog voltage input for the controller circuits; connect to PVIN through a 10Ω resistor, with a 1 µF capacitor to AGND, and connect AVIN2 to this pin. |
| 11 | POK | output | Open-drain power OK output with 5 mA sink capability; high when VOUT is within 92% to 111% of the set value. |
| 12 | ENABLE | input | Logic high enables the output and starts soft start, logic low disables and discharges the output; must not be left floating. |
| 13 | PVIN | power_in | Input power supply (2.4 V to 5.5 V recommended); decouple with input capacitor(s) to PGND. |
| 14 | PVIN | power_in | Input power supply (2.4 V to 5.5 V recommended); decouple with input capacitor(s) to PGND. |
| 15 | NC(SW) | unconnected | No connect, internally tied to the switching node; must not be connected to any external signal, ground or voltage, but must be soldered to the PCB. |
| 16 | NC(SW) | unconnected | No connect, internally tied to the switching node; must not be connected to any external signal, ground or voltage, but must be soldered to the PCB. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Intel/Altera |
| Package | QFN-16(3x3) |
| Category | Power Management |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltages on PVIN, AVIN, VOUT | -0.3 | 6.5 | V | 3 | |||
| Voltages on ENABLE, POK | -0.3 | V | max printed as VIN | 3 | |||
| Voltage on VFB | -0.3 | 2.7 | V | 3 | |||
| Maximum Operating Junction Temperature | 150 | °C | 4 | ||||
| Ambient Operating Range | -40 | 85 | °C | 4 | |||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Reflow Peak Body Temperature | 260 | °C | 10 Sec, MSL3 JEDEC J-STD-020A | 4 | |||
| HBM ESD | -2000 | 2000 | V | Human Body Model | 4 | ||
| CDM ESD | -500 | 500 | V | Charged Device Model | 4 | ||
| Input Voltage Range | VIN | 2.4 | 5.5 | V | 4 | ||
| Output Voltage Range | VOUT | 0.6 | V | max printed as VIN - VDO | 4 | ||
| Output Current | ILOAD | 0 | 1500 | mA | 4 | ||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | 4 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 4 | ||
| Thermal Resistance Junction to Ambient | θJA | 55 | °C/W | 0 LFM, 2 oz copper board | 4 | ||
| Thermal Shutdown | TSD | 155 | °C | Junction temperature | 4 | ||
| Thermal Shutdown Hysteresis | TSDH | 15 | °C | 4 | |||
| Operating Input Voltage | VIN | 2.4 | 5.5 | V | 5 | ||
| VFB Voltage Initial Accuracy | VFB | 0.588 | 0.6 | 0.612 | V | TA = 25 °C; VIN = 5V; ILOAD = 100 mA | 5 |
| VOUT Rise Time | TRISE | 0.78 | 1.2 | 1.62 | mS | From time ENABLE goes high | 5 |
| VFB, ENABLE Pin Input Current | -40 | 40 | nA | -40°C ≤ TA ≤ +85°C | 5 | ||
| ENABLE Voltage Threshold Logic Low | 0 | 0.4 | V | 5 | |||
| ENABLE Voltage Threshold Logic High | VVFB | 1.4 | V | Logic High; max printed as VIN | 5 | ||
| POK Low Voltage | 0.15 | 0.4 | V | ISINK = 5 mA, -40°C ≤ TA ≤ +85°C | 6 | ||
| POK Pin VOH Leakage Current | 500 | nA | POK High, -40°C ≤ TA ≤ +85°C | 6 | |||
| Current Limit Threshold | 2 | 3.2 | A | 2.4 V ≤ VIN ≤ 5.5 V, -40°C ≤ TA ≤ +85°C | 6 | ||
| Dropout Resistance | 250 | 360 | mΩ | 6 | |||
| Shutdown Current | 14 | µA | ENABLE Low | 6 | |||
| Under Voltage Lock-Out VIN Rising | VUVLOR | 2.2 | V | 5 | |||
| Line Regulation | 0.31 | %/V | 2.4 V ≤ VIN ≤ 5.5V | 5 | |||
| Load Regulation | 0.42 | %/A | ILOAD = 0 to 1.5A | 5 | |||
| Temperature Variation | 0.0012 | %/°C | -40°C ≤ TA ≤ +85°C | 5 | |||
| Operating Frequency | FOSC | 4 | MHz | 6 |
CAD (KiCad official)
- Symbol:
EP53F8QI - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files:
ep53f8qi-etched.step/ep53f8qi-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ep53f8qi.step/ep53f8qi.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Intel/Altera datasheet (18 pp, sha256
ee774ae9bf97fd5a, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).