component
EMC1812T-AE
Public Made by Adomby adom
Microchip Tech Temperature Sensors, WDFN-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
296da49
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199
{
"slug": "emc1812t-ae",
"version": "0.1.0",
"type": "component",
"description": "Microchip Tech Temperature Sensors, WDFN-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"sensors",
"emc1812t-ae",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"emc1812t-ae.kicad_sym",
"emc1812t-ae.kicad_mod",
"emc1812t-ae.glb",
"emc1812t-ae.step",
"emc1812t-ae.lbr",
"docs/hero.png",
"docs/emc1812t-ae-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"emc1812t-ae-hero.glb",
"emc1812t-ae-hero.overlay.json",
"emc1812t-ae-etched.glb"
],
"component": {
"mpn": "EMC1812T-AE",
"manufacturer": "Microchip Tech",
"package": "WDFN-8-EP(2x2)",
"pin_count": 9,
"category": "Sensors",
"subcategory": "Temperature Sensors",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/10fb850ce619bdb7a374f2a64b6becf8.pdf",
"parts": {
"symbol": "emc1812t-ae.kicad_sym",
"footprint": "emc1812t-ae.kicad_mod",
"model_3d": "emc1812t-ae-hero.glb",
"model_3d_plain": "emc1812t-ae-etched.glb",
"model_3d_step": "emc1812t-ae-etched.step",
"model_3d_step_plain": "emc1812t-ae.step",
"lbr": "emc1812t-ae.lbr"
},
"distributor_links": {
"lcsc": "C625043"
},
"distributor_check": {
"checked_at": "2026-10-23T21:39:20Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "deferred",
"error": "shared DigiKey quota guard: 779 calls left today"
},
"mouser": {
"pn": null,
"status": "quota"
}
},
"pins": [
{
"number": "1",
"name": "VDD",
"type": "power_in",
"description": "Supplies power to the device; operating range is 1.62V to 3.6V (absolute maximum 4.0V)."
},
{
"number": "2",
"name": "DP",
"type": "passive",
"description": "Analog I/O connection to the anode of remote diode 1 (DP/DP1)."
},
{
"number": "3",
"name": "DN",
"type": "passive",
"description": "Analog I/O connection to the cathode of remote diode 1 (DN/DN1)."
},
{
"number": "4",
"name": "THERM/ADDR",
"type": "output",
"description": "Open-drain THERM limit alert that asserts low when the hardware-set THERM limit is exceeded by a temperature sensor and cannot be masked by registers; the pull-up resistor on this pin sets the SMBus slave address if enabled, and it needs an external pull-up."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Ground for the device."
},
{
"number": "6",
"name": "ALERT/THERM2",
"type": "output",
"description": "Open-drain maskable ALERT output that asserts when a diode temperature exceeds the ALERT threshold; it needs an external pull-up."
},
{
"number": "7",
"name": "SDA",
"type": "bidirectional",
"description": "Open-drain bidirectional SMBus/I2C data pin that needs an external pull-up."
},
{
"number": "8",
"name": "SCL",
"type": "input",
"description": "SMBus/I2C clock input pin."
},
{
"number": "9",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet lists EP as pin type P (power) with no internal connection to GND. I set it to passive; DP and DN are analog I/O (AIO) pins. I mapped them to passive because no KiCad class matches exactly"
],
"pages_sent": 24,
"cost_usd": 0.1525,
"at": "2026-10-23T21:36:52"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/10fb850ce619bdb7a374f2a64b6becf8.pdf",
"pages": 101,
"sha256": "0e3296e0a5eafe10",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 9,
"described": 9,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "emc1812t-ae.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.02,
2.0,
0.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "7e5b78b4909f52acb76dc5f26dab2aeed1632b497750b171bf555f9b315337d7",
"checked": "2026-10-23",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "emc1812t-ae-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.02,
2.0,
0.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "55d7062052d551b367df7d9c81bf67bad730cdd8ecafbd1c9927c20c00c558ee",
"checked": "2026-10-23",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}