component
EMC1812T-AE
Public Made by Adomby adom
Microchip Tech Temperature Sensors, WDFN-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownEMC1812T-AE
Microchip Tech · Temperature Sensors · WDFN-8-EP(2x2)
EMC1812T-AE from Microchip Tech, in a WDFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supplies power to the device; operating range is 1.62V to 3.6V (absolute maximum 4.0V). |
| 2 | DP | passive | Analog I/O connection to the anode of remote diode 1 (DP/DP1). |
| 3 | DN | passive | Analog I/O connection to the cathode of remote diode 1 (DN/DN1). |
| 4 | THERM/ADDR | output | Open-drain THERM limit alert that asserts low when the hardware-set THERM limit is exceeded by a temperature sensor and cannot be masked by registers; the pull-up resistor on this pin sets the SMBus slave address if enabled, and it needs an external pull-up. |
| 5 | GND | power_in | Ground for the device. |
| 6 | ALERT/THERM2 | output | Open-drain maskable ALERT output that asserts when a diode temperature exceeds the ALERT threshold; it needs an external pull-up. |
| 7 | SDA | bidirectional | Open-drain bidirectional SMBus/I2C data pin that needs an external pull-up. |
| 8 | SCL | input | SMBus/I2C clock input pin. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | WDFN-8-EP(2x2) |
| Category | Sensors |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 1.62 | 3.6 | V | 6 | ||
| Supply Current | IDD | 20 | 80 | µA | 0.0625 conversion/second, dynamic averaging disabled | 6 | |
| Supply Current | IDD | 25 | 164 | µA | 1 conversion/second, dynamic averaging disabled | 6 | |
| Supply Current | IDD | 205 | 432 | µA | 4 conversions/second, dynamic averaging disabled | 6 | |
| Supply Current | IDD | 800 | µA | > 16 conversions/second, dynamic averaging enabled | 6 | ||
| Standby Supply Current | IDD_OS | 15 | 75 | µA | Device in One-Shot state, no active I2C communications, ALERT and THERM pins not asserted | 6 | |
| Power-on Reset Release Voltage | PORR | 1.45 | V | Rising VDD | 6 | ||
| Power-up Timer | tPWRT | 15 | ms | 6 | |||
| VDD Rise Rate | VDD_RISE | 0.05 | V/ms | 0 to 2.75V in ~ 60 ms | 6 | ||
| Internal Temperature Accuracy | -1 | 0.25 | 1 | °C | 6 | ||
| External Temperature Accuracy - 8-Lead | -1 | 0.25 | 1 | °C | -20°C < TA < 105°C, -40°C < TD < +125°C, 2N3904 | 7 | |
| External Temperature Accuracy - 8-Lead | -1.5 | 0.25 | 1.5 | °C | -40°C < TA < +125°C, -40°C < TD < +125°C, 2N3904 | 7 | |
| Temperature Resolution | 0.125 | °C | 7 | ||||
| Time to First Communications | tINT_T | 15 | 20 | ms | Time after power-up before ready to begin communications and measurement | 7 | |
| Conversion Time per Channel | tCONV | 25 | ms | Default settings | 7 | ||
| Time to First Conversion from One-Shot | 5 | ms | 7 | ||||
| Time to First Conversion from Standby | tCONV1 | 220 | ms | Default settings | 7 | ||
| Capacitive Filter | CFILTER | 2.2 | 2.7 | nF | Connected across external diode | 7 | |
| ALERT/THERM Output Low Voltage | VOL | 0.4 | V | ISINK = 8 mA | 7 | ||
| ALERT/THERM Leakage Current | ILEAK | -5 | 5 | µA | ALERT and THERM pins, device powered, pull-up voltage < 3.6V | 7 | |
| SCL/SDA Input High-Level Voltage | VIH | 0.7 | V | min printed as 0.7 VDD | 7 | ||
| SCL/SDA Input Low-Level Voltage | VIL | 0.3 | V | max printed as 0.3 VDD | 7 | ||
| SDA/SCL Input Current | IIN | -5 | 5 | µA | SDA and SCL only | 7 | |
| SDA Output Low-Level Voltage | VOL | 0.4 | V | IO = 20 mA, VDD = 1.7V to 3.6V | 7 | ||
| SDA High-Level Current (leakage) | IOH | 1 | µA | VOH = VDD | 7 | ||
| SDA Low-Level Current | IOL | 20 | mA | VOL = 0.4V, VDD = 1.62V to 3.6V | 7 | ||
| SDA/SCL Input Capacitance | CIN | 5 | pF | 7 | |||
| SDA and SCL Inputs Hysteresis | VHYST | 0.05 | V | typ printed as 0.05 VDD | 7 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | 8 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 8 | ||
| Storage Temperature Range | TA | -65 | 125 | °C | 8 | ||
| Thermal Resistance, 8-Lead WDFN 2x2 mm | θJA | 141.3 | °C/W | JEDEC 2s2p, board size 76.2 x 114.3 x 1.6 mm, one thermal via, airflow = 0 m/s | 8 | ||
| Clock Frequency | fSMB | 10 | 400 | kHz | 8 | ||
| Spike Suppression | tSP | 50 | ns | 8 | |||
| Bus Free Time Stop to Start | tBUF | 1.3 | µs | 8 | |||
| Hold Time: Start | tHD:STA | 0.6 | µs | 8 | |||
| Setup Time: Start | tSU:STA | 0.6 | µs | 8 | |||
| Setup Time: Stop | tSU:STO | 0.6 | µs | 8 | |||
| Data Hold Time | tHD:DAT | 0 | µs | When transmitting to the master | 8 | ||
| Data Setup Time | tSU:DAT | 100 | ns | 8 | |||
| Clock Low Period | tLOW | 1.3 | µs | 8 | |||
| Clock High Period | tHIGH | 0.6 | µs | 8 | |||
| Clock/Data Fall Time | tFALL | 300 | ns | Min = 20 + 0.1 CLOAD ns | 8 | ||
| Clock/Data Rise Time | tRISE | 300 | ns | Min = 20 + 0.1 CLOAD ns | 8 | ||
| Capacitive Load | CLOAD | 400 | pF | Per bus line | 8 | ||
| Time-out | tTIMEOUT | 25 | 35 | ms | Disabled by default | 8 | |
| Supply Voltage | VDD | 4 | V | 6 | |||
| Voltage at all Input/Output Pins | -0.3 | 4 | V | GND, 0.3V to 4.0V | 6 | ||
| Storage Temperature | -65 | 150 | °C | 6 | |||
| Ambient Temperature with Power Applied | -40 | 125 | °C | 6 | |||
| Junction Temperature | TJ | 150 | °C | 6 | |||
| Latch-up Current at Each Pin | -200 | 200 | mA | +25°C | 6 |
CAD (KiCad official)
- Symbol:
EMC1812T-AE - Footprint:
Package_DFN_QFN:WDFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.2mm - 3D model: WDFN-8-EP(2x2), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
emc1812t-ae-etched.step/emc1812t-ae-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);emc1812t-ae.step/emc1812t-ae.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (101 pp, sha256
0e3296e0a5eafe10, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).