main
History Download
Ray Publish 0.1.0 296da49

EMC1812T-AE

Microchip Tech · Temperature Sensors · WDFN-8-EP(2x2)

EMC1812T-AE from Microchip Tech, in a WDFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Supplies power to the device; operating range is 1.62V to 3.6V (absolute maximum 4.0V).
2 DP passive Analog I/O connection to the anode of remote diode 1 (DP/DP1).
3 DN passive Analog I/O connection to the cathode of remote diode 1 (DN/DN1).
4 THERM/ADDR output Open-drain THERM limit alert that asserts low when the hardware-set THERM limit is exceeded by a temperature sensor and cannot be masked by registers; the pull-up resistor on this pin sets the SMBus slave address if enabled, and it needs an external pull-up.
5 GND power_in Ground for the device.
6 ALERT/THERM2 output Open-drain maskable ALERT output that asserts when a diode temperature exceeds the ALERT threshold; it needs an external pull-up.
7 SDA bidirectional Open-drain bidirectional SMBus/I2C data pin that needs an external pull-up.
8 SCL input SMBus/I2C clock input pin.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package WDFN-8-EP(2x2)
Category Sensors
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 1.62 3.6 V 6
Supply Current IDD 20 80 µA 0.0625 conversion/second, dynamic averaging disabled 6
Supply Current IDD 25 164 µA 1 conversion/second, dynamic averaging disabled 6
Supply Current IDD 205 432 µA 4 conversions/second, dynamic averaging disabled 6
Supply Current IDD 800 µA > 16 conversions/second, dynamic averaging enabled 6
Standby Supply Current IDD_OS 15 75 µA Device in One-Shot state, no active I2C communications, ALERT and THERM pins not asserted 6
Power-on Reset Release Voltage PORR 1.45 V Rising VDD 6
Power-up Timer tPWRT 15 ms 6
VDD Rise Rate VDD_RISE 0.05 V/ms 0 to 2.75V in ~ 60 ms 6
Internal Temperature Accuracy -1 0.25 1 °C 6
External Temperature Accuracy - 8-Lead -1 0.25 1 °C -20°C < TA < 105°C, -40°C < TD < +125°C, 2N3904 7
External Temperature Accuracy - 8-Lead -1.5 0.25 1.5 °C -40°C < TA < +125°C, -40°C < TD < +125°C, 2N3904 7
Temperature Resolution 0.125 °C 7
Time to First Communications tINT_T 15 20 ms Time after power-up before ready to begin communications and measurement 7
Conversion Time per Channel tCONV 25 ms Default settings 7
Time to First Conversion from One-Shot 5 ms 7
Time to First Conversion from Standby tCONV1 220 ms Default settings 7
Capacitive Filter CFILTER 2.2 2.7 nF Connected across external diode 7
ALERT/THERM Output Low Voltage VOL 0.4 V ISINK = 8 mA 7
ALERT/THERM Leakage Current ILEAK -5 5 µA ALERT and THERM pins, device powered, pull-up voltage < 3.6V 7
SCL/SDA Input High-Level Voltage VIH 0.7 V min printed as 0.7 VDD 7
SCL/SDA Input Low-Level Voltage VIL 0.3 V max printed as 0.3 VDD 7
SDA/SCL Input Current IIN -5 5 µA SDA and SCL only 7
SDA Output Low-Level Voltage VOL 0.4 V IO = 20 mA, VDD = 1.7V to 3.6V 7
SDA High-Level Current (leakage) IOH 1 µA VOH = VDD 7
SDA Low-Level Current IOL 20 mA VOL = 0.4V, VDD = 1.62V to 3.6V 7
SDA/SCL Input Capacitance CIN 5 pF 7
SDA and SCL Inputs Hysteresis VHYST 0.05 V typ printed as 0.05 VDD 7
Specified Temperature Range TA -40 125 °C 8
Operating Temperature Range TA -40 125 °C 8
Storage Temperature Range TA -65 125 °C 8
Thermal Resistance, 8-Lead WDFN 2x2 mm θJA 141.3 °C/W JEDEC 2s2p, board size 76.2 x 114.3 x 1.6 mm, one thermal via, airflow = 0 m/s 8
Clock Frequency fSMB 10 400 kHz 8
Spike Suppression tSP 50 ns 8
Bus Free Time Stop to Start tBUF 1.3 µs 8
Hold Time: Start tHD:STA 0.6 µs 8
Setup Time: Start tSU:STA 0.6 µs 8
Setup Time: Stop tSU:STO 0.6 µs 8
Data Hold Time tHD:DAT 0 µs When transmitting to the master 8
Data Setup Time tSU:DAT 100 ns 8
Clock Low Period tLOW 1.3 µs 8
Clock High Period tHIGH 0.6 µs 8
Clock/Data Fall Time tFALL 300 ns Min = 20 + 0.1 CLOAD ns 8
Clock/Data Rise Time tRISE 300 ns Min = 20 + 0.1 CLOAD ns 8
Capacitive Load CLOAD 400 pF Per bus line 8
Time-out tTIMEOUT 25 35 ms Disabled by default 8
Supply Voltage VDD 4 V 6
Voltage at all Input/Output Pins -0.3 4 V GND, 0.3V to 4.0V 6
Storage Temperature -65 150 °C 6
Ambient Temperature with Power Applied -40 125 °C 6
Junction Temperature TJ 150 °C 6
Latch-up Current at Each Pin -200 200 mA +25°C 6

CAD (KiCad official)

  • Symbol: EMC1812T-AE
  • Footprint: Package_DFN_QFN:WDFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.2mm
  • 3D model: WDFN-8-EP(2x2), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: emc1812t-ae-etched.step / emc1812t-ae-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); emc1812t-ae.step / emc1812t-ae.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (101 pp, sha256 0e3296e0a5eafe10, retrieved 2026-10-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF