main
Ray Publish 0.1.0 d6f7ff3
{
  "slug": "emc1414-1-aizl-tr",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Temperature Sensors, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "emc1414-1-aizl-tr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "emc1414-1-aizl-tr.kicad_sym",
    "emc1414-1-aizl-tr.kicad_mod",
    "emc1414-1-aizl-tr.glb",
    "emc1414-1-aizl-tr.step",
    "emc1414-1-aizl-tr.lbr",
    "docs/hero.png",
    "docs/emc1414-1-aizl-tr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "emc1414-1-aizl-tr-hero.glb",
    "emc1414-1-aizl-tr-hero.overlay.json",
    "emc1414-1-aizl-tr-etched.glb"
  ],
  "component": {
    "mpn": "EMC1414-1-AIZL-TR",
    "manufacturer": "Microchip Tech",
    "package": "MSOP-10",
    "pin_count": 10,
    "category": "Sensors",
    "subcategory": "Temperature Sensors",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/d9a29f06caacc318de6d1b3e06d470f7.pdf",
    "parts": {
      "symbol": "emc1414-1-aizl-tr.kicad_sym",
      "footprint": "emc1414-1-aizl-tr.kicad_mod",
      "model_3d": "emc1414-1-aizl-tr-hero.glb",
      "model_3d_plain": "emc1414-1-aizl-tr-etched.glb",
      "model_3d_step": "emc1414-1-aizl-tr-etched.step",
      "model_3d_step_plain": "emc1414-1-aizl-tr.step",
      "lbr": "emc1414-1-aizl-tr.lbr"
    },
    "distributor_links": {
      "lcsc": "C626960",
      "digikey": "EMC1414-1-AIZL-TR-ND",
      "mouser": "886-EMC1414-1-AIZLTR"
    },
    "distributor_check": {
      "checked_at": "2026-10-29T01:57:41Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "EMC1414-1-AIZL-TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "886-EMC1414-1-AIZLTR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply input for the device; the absolute maximum supply voltage is -0.3 to 4.0 V, and the datasheet lists a 3.3V supply voltage."
      },
      {
        "number": "2",
        "name": "DP1",
        "type": "passive",
        "description": "Anode (positive) connection for external diode 1, an analog I/O pin."
      },
      {
        "number": "3",
        "name": "DN1",
        "type": "passive",
        "description": "Cathode (negative) connection for external diode 1, an analog I/O pin."
      },
      {
        "number": "4",
        "name": "DP2/DN3",
        "type": "passive",
        "description": "Anode connection for external diode 2, or cathode connection for external diode 3 when used as anti-parallel diodes (EMC1414 only); analog I/O."
      },
      {
        "number": "5",
        "name": "DN2/DP3",
        "type": "passive",
        "description": "Cathode connection for external diode 2, or anode connection for external diode 3 when used as anti-parallel diodes (EMC1414 only); analog I/O."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection for the device."
      },
      {
        "number": "7",
        "name": "THERM/ADDR",
        "type": "output",
        "description": "THERM is a critical temperature open-drain output (5V tolerant) that requires a pull-up resistor; on programmable-address variants this pin selects the SMBus address through its pull-up resistor."
      },
      {
        "number": "8",
        "name": "ALERT",
        "type": "output",
        "description": "Active-low ALERT open-drain digital output (5V tolerant) that requires a pull-up resistor, with the pull-up voltage not exceeding VDD by more than 3.6 V."
      },
      {
        "number": "9",
        "name": "SMDATA",
        "type": "bidirectional",
        "description": "SMBus data input/output, open-drain when driven as an output (5V tolerant) and requires a pull-up resistor."
      },
      {
        "number": "10",
        "name": "SMCLK",
        "type": "input",
        "description": "SMBus clock digital input (5V tolerant) that requires a pull-up resistor."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MSOP-10 pin diagram (Figure 3.1) is an image and is not present in the extracted text. Pin numbe; The bottom exposed pad in Table 3.1 applies to the DFN-10 package only and was excluded because this; Table 4.2 (Electrical Specifications, page 11) is not in the provided pages, so the operating supply"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0807,
        "at": "2026-10-29T01:57:26"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/d9a29f06caacc318de6d1b3e06d470f7.pdf",
        "pages": 54,
        "sha256": "59cf383eb07ca8b0",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "emc1414-1-aizl-tr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "emc1414-1-aizl-tr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "fe61ec3581adb3dfebc8d47decf00bbd484fe577df03f4b08e02df377f5600a2",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}