main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers emc1414-1-aizl-tr: viewers · Ray
emc1414-1-aizl-tr-etched.glb Publish 0.1.0 · Ray
emc1414-1-aizl-tr-etched.step emc1414-1-aizl-tr: factory component page (tier=mfr) · Ray
emc1414-1-aizl-tr-hero.glb emc1414-1-aizl-tr: hero GLB from the etched model (keeps the MPN mark) · Ray
emc1414-1-aizl-tr-hero.overlay.json Publish 0.1.0 · Ray
emc1414-1-aizl-tr.glb Publish 0.1.0 · Ray
emc1414-1-aizl-tr.kicad_mod Publish 0.1.0 · Ray
emc1414-1-aizl-tr.kicad_sym Publish 0.1.0 · Ray
emc1414-1-aizl-tr.lbr Publish 0.1.0 · Ray
emc1414-1-aizl-tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

EMC1414-1-AIZL-TR

Microchip Tech · Temperature Sensors · MSOP-10

EMC1414-1-AIZL-TR from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply input for the device; the absolute maximum supply voltage is -0.3 to 4.0 V, and the datasheet lists a 3.3V supply voltage.
2 DP1 passive Anode (positive) connection for external diode 1, an analog I/O pin.
3 DN1 passive Cathode (negative) connection for external diode 1, an analog I/O pin.
4 DP2/DN3 passive Anode connection for external diode 2, or cathode connection for external diode 3 when used as anti-parallel diodes (EMC1414 only); analog I/O.
5 DN2/DP3 passive Cathode connection for external diode 2, or anode connection for external diode 3 when used as anti-parallel diodes (EMC1414 only); analog I/O.
6 GND power_in Ground connection for the device.
7 THERM/ADDR output THERM is a critical temperature open-drain output (5V tolerant) that requires a pull-up resistor; on programmable-address variants this pin selects the SMBus address through its pull-up resistor.
8 ALERT output Active-low ALERT open-drain digital output (5V tolerant) that requires a pull-up resistor, with the pull-up voltage not exceeding VDD by more than 3.6 V.
9 SMDATA bidirectional SMBus data input/output, open-drain when driven as an output (5V tolerant) and requires a pull-up resistor.
10 SMCLK input SMBus clock digital input (5V tolerant) that requires a pull-up resistor.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-10
Category Sensors
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (VDD) absolute maximum VDD -0.3 4 V 10
Voltage on 5V tolerant pins V5VT_pin -0.3 5.5 V 10
Voltage on 5V tolerant pins, difference to VDD /V5VT_pin - VDD/ 0 3.6 V See Note 4.1 10
Voltage on any other pin to Ground (upper limit printed as VDD +0.3 V) -0.3 V 10
Operating Temperature Range -40 125 °C 10
Storage Temperature Range -55 150 °C 10
ESD Rating, All pins HBM 2000 V HBM, all pins 10
Supply Voltage VDD 3 3.3 3.6 V VDD = 3.0V to 3.6V, TA = -40°C to 125°C (table header) 11
Supply Current (1 conversion/sec, dynamic averaging disabled) IDD 430 850 μA 1 conversion / sec, dynamic averaging disabled 11
Supply Current (4 conversions/sec, dynamic averaging enabled) IDD 930 1200 μA 4 conversions / sec, dynamic averaging enabled 11
Supply Current (>16 conversions/sec, dynamic averaging enabled) IDD 1120 μA > 16 conversions / sec, dynamic averaging enabled 11
Standby Supply Current IDD 170 230 μA Device in Standby mode, no SMBus communications, ALERT and THERM pins not asserted. 11
Internal Temperature Accuracy -1 0.25 1 °C -5°C < TA < 100°C 11
Internal Temperature Accuracy -2 2 °C -40°C < TA < 125°C 11
External Temperature Accuracy -1 0.25 1 °C +20°C < TDIODE < +110°C, 0°C < TA < 100°C 11
External Temperature Accuracy -2 0.5 2 °C -40°C < TDIODE < 127°C 11
Capacitive Filter CFILTER 2.2 2.7 nF Connected across external diode 11
Output Low Voltage VOL 0.4 V ISINK = 8mA 11
Leakage Current (ALERT and THERM pins) ILEAK -5 5 μA Device powered or unpowered; TA < 85°C; pull-up voltage < 3.6V 11
Input High Voltage (upper limit printed as VDD) VIH 2 V 5V Tolerant 12
Input Low Voltage VIL -0.3 0.8 V 5V Tolerant 12
Leakage Current (SMBus) ILEAK -5 5 μA Powered or unpowered; TA < 85°C 12
Output Low Sink Current IOL 8.2 15 mA SMDATA = 0.4V 12
Clock Frequency fSMB 10 400 kHz 12
Spike Suppression tSP 50 ns 12
Bus Free Time Stop to Start tBUF 1.3 μs 12
Hold Time: Start tHD:STA 0.6 μs 12
Setup Time: Start tSU:STA 0.6 μs 12
Setup Time: Stop tSU:STO 0.6 μs 12
Data Hold Time (transmitting to master) tHD:DAT 0 μs When transmitting to the master 12
Data Hold Time (receiving from master) tHD:DAT 0.3 μs When receiving from the master 12
Data Setup Time tSU:DAT 100 ns 12
Clock Low Period tLOW 1.3 μs 12
Clock High Period tHIGH 0.6 μs 12
Clock/Data Fall time tFALL 300 ns Min = 20+0.1CLOAD ns (printed note) 12
Clock/Data Rise time tRISE 300 ns Min = 20+0.1CLOAD ns (printed note) 12
Capacitive Load CLOAD 400 pF per bus line 12
Thermal Resistance (j-a), MSOP-10 132.2 °C/W Package Thermal Characteristics for MSOP-10 10

CAD (KiCad official)

  • Symbol: EMC1414-1-AIZL-TR
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)
  • 3D model files: emc1414-1-aizl-tr-etched.step / emc1414-1-aizl-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); emc1414-1-aizl-tr.step / emc1414-1-aizl-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (54 pp, sha256 59cf383eb07ca8b0, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF