component
EMC1413-A-AIZL-TR
Public Made by Adomby adom
Microchip Tech Temperature Sensors, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
b866f6a
EMC1413-A-AIZL-TR
Microchip Tech · Temperature Sensors · MSOP-10
EMC1413-A-AIZL-TR from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply pin; the datasheet lists the supply as 3.3V with an absolute maximum supply voltage of -0.3 to 4.0 V. |
| 2 | DP1 | bidirectional | External diode 1 positive (anode) connection, an analog input/output pin. |
| 3 | DN1 | bidirectional | External diode 1 negative (cathode) connection, an analog input/output pin. |
| 4 | DP2 / DN3 | bidirectional | External diode 2 positive (anode) connection, or External Diode 3 negative (cathode) connection for anti-parallel diodes, which the datasheet states applies to the EMC1414 only. |
| 5 | DN2 / DP3 | bidirectional | External diode 2 negative (cathode) connection, or External Diode 3 positive (anode) connection for anti-parallel diodes, which the datasheet states applies to the EMC1414 only. |
| 6 | GND | power_in | Ground pin for the device. |
| 7 | THERM / ADDR | output | THERM is the critical thermal output signal that requires a 5V-tolerant open-drain pull-up resistor; ADDR selects the SMBus address based on the pull-up resistor. |
| 8 | ALERT | output | Active low digital ALERT output signal that requires a 5V-tolerant open-drain pull-up resistor, with the pull-up voltage not to exceed VDD by more than 3.6V. |
| 9 | SMDATA | bidirectional | SMBus data input/output that requires a 5V-tolerant open-drain pull-up resistor, with the pull-up voltage not to exceed VDD by more than 3.6V. |
| 10 | SMCLK | input | SMBus clock digital input that is 5V tolerant and requires a pull-up resistor, with the pull-up voltage not to exceed VDD by more than 3.6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-10 |
| Category | Sensors |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | -0.3 | 4 | V | 10 | ||
| Voltage on 5V tolerant pins | V5VT_pin | -0.3 | 5.5 | V | 10 | ||
| Voltage on 5V tolerant pins /V5VT_pin - VDD/ | 0 | 3.6 | V | see Note 4.1 | 10 | ||
| Voltage on any other pin to Ground | -0.3 | V | upper limit VDD +0.3 V | 10 | |||
| Operating Temperature Range | -40 | 125 | °C | 10 | |||
| Storage Temperature Range | -55 | 150 | °C | 10 | |||
| Thermal Resistance (j-a) MSOP-10 | 132.2 | °C/W | Package Thermal Characteristics for MSOP-10 | 10 | |||
| ESD Rating, All pins HBM | 2000 | V | HBM | 10 | |||
| Supply Voltage | VDD | 3 | 3.3 | 3.6 | V | 11 | |
| Supply Current | IDD | 430 | 850 | μA | 1 conversion / sec, dynamic averaging disabled | 11 | |
| Supply Current | IDD | 930 | 1200 | μA | 4 conversions / sec, dynamic averaging enabled | 11 | |
| Supply Current | IDD | 1120 | μA | > 16 conversions / sec, dynamic averaging enabled | 11 | ||
| Standby Supply Current | IDD | 170 | 230 | μA | Device in Standby mode, no SMBus communications, ALERT and THERM pins not asserted. | 11 | |
| Internal Temperature Accuracy | -1 | 1 | °C | -5°C < TA < 100°C | 11 | ||
| Internal Temperature Accuracy | -2 | 2 | °C | -40°C < TA < 125°C | 11 | ||
| External Temperature Accuracy | -1 | 1 | °C | +20°C < TDIODE < +110°C; 0°C < TA < 100°C | 11 | ||
| External Temperature Accuracy | -2 | 2 | °C | -40°C < TDIODE < 127°C | 11 | ||
| Capacitive Filter | CFILTER | 2.2 | 2.7 | nF | Connected across external diode | 11 | |
| Output Low Voltage | VOL | 0.4 | V | ISINK = 8mA | 11 | ||
| Leakage Current ALERT and THERM pins | ILEAK | -5 | 5 | μA | Device powered or unpowered; TA < 85°C; pull-up voltage < 3.6V | 11 | |
| Input High Voltage | VIH | 2 | V | 5V Tolerant; max VDD | 12 | ||
| Input Low Voltage | VIL | -0.3 | 0.8 | V | 5V Tolerant | 12 | |
| Leakage Current SMBus | ILEAK | -5 | 5 | μA | Powered or unpowered; TA < 85°C | 12 | |
| Hysteresis | 420 | mV | 12 | ||||
| Input Capacitance | CIN | 5 | pF | 12 | |||
| Output Low Sink Current | IOL | 8.2 | 15 | mA | SMDATA = 0.4V | 12 | |
| Clock Frequency | fSMB | 10 | 400 | kHz | 12 | ||
| Spike Suppression | tSP | 50 | ns | 12 | |||
| Bus Free Time Stop to Start | tBUF | 1.3 | μs | 12 | |||
| Hold Time: Start | tHD:STA | 0.6 | μs | 12 | |||
| Setup Time: Start | tSU:STA | 0.6 | μs | 12 | |||
| Setup Time: Stop | tSU:STO | 0.6 | μs | 12 | |||
| Data Hold Time | tHD:DAT | 0 | μs | When transmitting to the master | 12 | ||
| Data Hold Time | tHD:DAT | 0.3 | μs | When receiving from the master | 12 | ||
| Data Setup Time | tSU:DAT | 100 | ns | 12 | |||
| Clock Low Period | tLOW | 1.3 | μs | 12 | |||
| Clock High Period | tHIGH | 0.6 | μs | 12 | |||
| Clock/Data Fall time | tFALL | 300 | ns | Min = 20+0.1CLOAD ns | 12 | ||
| Clock/Data Rise time | tRISE | 300 | ns | Min = 20+0.1CLOAD ns | 12 | ||
| Capacitive Load | CLOAD | 400 | pF | per bus line | 12 | ||
| Temperature Resolution | 0.125 | °C | 11 | ||||
| Conversion Time all Channels | tCONV | 150 | ms | default settings | 11 |
CAD (KiCad official)
- Symbol:
EMC1413-A-AIZL-TR - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
emc1413-a-aizl-tr-etched.step/emc1413-a-aizl-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);emc1413-a-aizl-tr.step/emc1413-a-aizl-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (54 pp, sha256
59cf383eb07ca8b0, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# EMC1413-A-AIZL-TR
**Microchip Tech** · Temperature Sensors · MSOP-10
EMC1413-A-AIZL-TR from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply pin; the datasheet lists the supply as 3.3V with an absolute maximum supply voltage of -0.3 to 4.0 V. |
| 2 | DP1 | bidirectional | External diode 1 positive (anode) connection, an analog input/output pin. |
| 3 | DN1 | bidirectional | External diode 1 negative (cathode) connection, an analog input/output pin. |
| 4 | DP2 / DN3 | bidirectional | External diode 2 positive (anode) connection, or External Diode 3 negative (cathode) connection for anti-parallel diodes, which the datasheet states applies to the EMC1414 only. |
| 5 | DN2 / DP3 | bidirectional | External diode 2 negative (cathode) connection, or External Diode 3 positive (anode) connection for anti-parallel diodes, which the datasheet states applies to the EMC1414 only. |
| 6 | GND | power_in | Ground pin for the device. |
| 7 | THERM / ADDR | output | THERM is the critical thermal output signal that requires a 5V-tolerant open-drain pull-up resistor; ADDR selects the SMBus address based on the pull-up resistor. |
| 8 | ALERT | output | Active low digital ALERT output signal that requires a 5V-tolerant open-drain pull-up resistor, with the pull-up voltage not to exceed VDD by more than 3.6V. |
| 9 | SMDATA | bidirectional | SMBus data input/output that requires a 5V-tolerant open-drain pull-up resistor, with the pull-up voltage not to exceed VDD by more than 3.6V. |
| 10 | SMCLK | input | SMBus clock digital input that is 5V tolerant and requires a pull-up resistor, with the pull-up voltage not to exceed VDD by more than 3.6V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-10 |
| Category | Sensors |
| Pins | 10 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | -0.3 | | 4 | V | | 10 |
| Voltage on 5V tolerant pins | V5VT_pin | -0.3 | | 5.5 | V | | 10 |
| Voltage on 5V tolerant pins /V5VT_pin - VDD/ | | 0 | | 3.6 | V | see Note 4.1 | 10 |
| Voltage on any other pin to Ground | | -0.3 | | | V | upper limit VDD +0.3 V | 10 |
| Operating Temperature Range | | -40 | | 125 | °C | | 10 |
| Storage Temperature Range | | -55 | | 150 | °C | | 10 |
| Thermal Resistance (j-a) MSOP-10 | | | 132.2 | | °C/W | Package Thermal Characteristics for MSOP-10 | 10 |
| ESD Rating, All pins HBM | | | 2000 | | V | HBM | 10 |
| Supply Voltage | VDD | 3 | 3.3 | 3.6 | V | | 11 |
| Supply Current | IDD | | 430 | 850 | μA | 1 conversion / sec, dynamic averaging disabled | 11 |
| Supply Current | IDD | | 930 | 1200 | μA | 4 conversions / sec, dynamic averaging enabled | 11 |
| Supply Current | IDD | | | 1120 | μA | > 16 conversions / sec, dynamic averaging enabled | 11 |
| Standby Supply Current | IDD | | 170 | 230 | μA | Device in Standby mode, no SMBus communications, ALERT and THERM pins not asserted. | 11 |
| Internal Temperature Accuracy | | -1 | | 1 | °C | -5°C < TA < 100°C | 11 |
| Internal Temperature Accuracy | | -2 | | 2 | °C | -40°C < TA < 125°C | 11 |
| External Temperature Accuracy | | -1 | | 1 | °C | +20°C < TDIODE < +110°C; 0°C < TA < 100°C | 11 |
| External Temperature Accuracy | | -2 | | 2 | °C | -40°C < TDIODE < 127°C | 11 |
| Capacitive Filter | CFILTER | 2.2 | | 2.7 | nF | Connected across external diode | 11 |
| Output Low Voltage | VOL | | | 0.4 | V | ISINK = 8mA | 11 |
| Leakage Current ALERT and THERM pins | ILEAK | -5 | | 5 | μA | Device powered or unpowered; TA < 85°C; pull-up voltage < 3.6V | 11 |
| Input High Voltage | VIH | 2 | | | V | 5V Tolerant; max VDD | 12 |
| Input Low Voltage | VIL | -0.3 | | 0.8 | V | 5V Tolerant | 12 |
| Leakage Current SMBus | ILEAK | -5 | | 5 | μA | Powered or unpowered; TA < 85°C | 12 |
| Hysteresis | | | 420 | | mV | | 12 |
| Input Capacitance | CIN | | 5 | | pF | | 12 |
| Output Low Sink Current | IOL | 8.2 | | 15 | mA | SMDATA = 0.4V | 12 |
| Clock Frequency | fSMB | 10 | | 400 | kHz | | 12 |
| Spike Suppression | tSP | | | 50 | ns | | 12 |
| Bus Free Time Stop to Start | tBUF | 1.3 | | | μs | | 12 |
| Hold Time: Start | tHD:STA | 0.6 | | | μs | | 12 |
| Setup Time: Start | tSU:STA | 0.6 | | | μs | | 12 |
| Setup Time: Stop | tSU:STO | 0.6 | | | μs | | 12 |
| Data Hold Time | tHD:DAT | 0 | | | μs | When transmitting to the master | 12 |
| Data Hold Time | tHD:DAT | 0.3 | | | μs | When receiving from the master | 12 |
| Data Setup Time | tSU:DAT | 100 | | | ns | | 12 |
| Clock Low Period | tLOW | 1.3 | | | μs | | 12 |
| Clock High Period | tHIGH | 0.6 | | | μs | | 12 |
| Clock/Data Fall time | tFALL | | | 300 | ns | Min = 20+0.1CLOAD ns | 12 |
| Clock/Data Rise time | tRISE | | | 300 | ns | Min = 20+0.1CLOAD ns | 12 |
| Capacitive Load | CLOAD | | | 400 | pF | per bus line | 12 |
| Temperature Resolution | | | 0.125 | | °C | | 11 |
| Conversion Time all Channels | tCONV | | 150 | | ms | default settings | 11 |
## CAD (KiCad official)
- Symbol: `EMC1413-A-AIZL-TR`
- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`
- 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files: `emc1413-a-aizl-tr-etched.step` / `emc1413-a-aizl-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `emc1413-a-aizl-tr.step` / `emc1413-a-aizl-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/emc1413-a-aizl-tr-datasheet.pdf) (54 pp, sha256 `59cf383eb07ca8b0`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/emc1413-a-aizl-tr-datasheet.pdf)