main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers emc1413-a-aizl-tr: symbol repaired (body fitted to the names) · Ray
emc1413-a-aizl-tr-etched.glb Publish 0.1.0 · Ray
emc1413-a-aizl-tr-etched.step emc1413-a-aizl-tr: factory component page (tier=mfr) · Ray
emc1413-a-aizl-tr-hero.glb emc1413-a-aizl-tr: hero GLB from the etched model (keeps the MPN mark) · Ray
emc1413-a-aizl-tr-hero.overlay.json Publish 0.1.0 · Ray
emc1413-a-aizl-tr.glb Publish 0.1.0 · Ray
emc1413-a-aizl-tr.kicad_mod Publish 0.1.0 · Ray
emc1413-a-aizl-tr.kicad_sym emc1413-a-aizl-tr: symbol repaired (body fitted to the names) · Ray
emc1413-a-aizl-tr.lbr emc1413-a-aizl-tr: symbol repaired (body fitted to the names) · Ray
emc1413-a-aizl-tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 10 pins · Ray

EMC1413-A-AIZL-TR

Microchip Tech · Temperature Sensors · MSOP-10

EMC1413-A-AIZL-TR from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply pin; the datasheet lists the supply as 3.3V with an absolute maximum supply voltage of -0.3 to 4.0 V.
2 DP1 bidirectional External diode 1 positive (anode) connection, an analog input/output pin.
3 DN1 bidirectional External diode 1 negative (cathode) connection, an analog input/output pin.
4 DP2 / DN3 bidirectional External diode 2 positive (anode) connection, or External Diode 3 negative (cathode) connection for anti-parallel diodes, which the datasheet states applies to the EMC1414 only.
5 DN2 / DP3 bidirectional External diode 2 negative (cathode) connection, or External Diode 3 positive (anode) connection for anti-parallel diodes, which the datasheet states applies to the EMC1414 only.
6 GND power_in Ground pin for the device.
7 THERM / ADDR output THERM is the critical thermal output signal that requires a 5V-tolerant open-drain pull-up resistor; ADDR selects the SMBus address based on the pull-up resistor.
8 ALERT output Active low digital ALERT output signal that requires a 5V-tolerant open-drain pull-up resistor, with the pull-up voltage not to exceed VDD by more than 3.6V.
9 SMDATA bidirectional SMBus data input/output that requires a 5V-tolerant open-drain pull-up resistor, with the pull-up voltage not to exceed VDD by more than 3.6V.
10 SMCLK input SMBus clock digital input that is 5V tolerant and requires a pull-up resistor, with the pull-up voltage not to exceed VDD by more than 3.6V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-10
Category Sensors
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD -0.3 4 V 10
Voltage on 5V tolerant pins V5VT_pin -0.3 5.5 V 10
Voltage on 5V tolerant pins /V5VT_pin - VDD/ 0 3.6 V see Note 4.1 10
Voltage on any other pin to Ground -0.3 V upper limit VDD +0.3 V 10
Operating Temperature Range -40 125 °C 10
Storage Temperature Range -55 150 °C 10
Thermal Resistance (j-a) MSOP-10 132.2 °C/W Package Thermal Characteristics for MSOP-10 10
ESD Rating, All pins HBM 2000 V HBM 10
Supply Voltage VDD 3 3.3 3.6 V 11
Supply Current IDD 430 850 μA 1 conversion / sec, dynamic averaging disabled 11
Supply Current IDD 930 1200 μA 4 conversions / sec, dynamic averaging enabled 11
Supply Current IDD 1120 μA > 16 conversions / sec, dynamic averaging enabled 11
Standby Supply Current IDD 170 230 μA Device in Standby mode, no SMBus communications, ALERT and THERM pins not asserted. 11
Internal Temperature Accuracy -1 1 °C -5°C < TA < 100°C 11
Internal Temperature Accuracy -2 2 °C -40°C < TA < 125°C 11
External Temperature Accuracy -1 1 °C +20°C < TDIODE < +110°C; 0°C < TA < 100°C 11
External Temperature Accuracy -2 2 °C -40°C < TDIODE < 127°C 11
Capacitive Filter CFILTER 2.2 2.7 nF Connected across external diode 11
Output Low Voltage VOL 0.4 V ISINK = 8mA 11
Leakage Current ALERT and THERM pins ILEAK -5 5 μA Device powered or unpowered; TA < 85°C; pull-up voltage < 3.6V 11
Input High Voltage VIH 2 V 5V Tolerant; max VDD 12
Input Low Voltage VIL -0.3 0.8 V 5V Tolerant 12
Leakage Current SMBus ILEAK -5 5 μA Powered or unpowered; TA < 85°C 12
Hysteresis 420 mV 12
Input Capacitance CIN 5 pF 12
Output Low Sink Current IOL 8.2 15 mA SMDATA = 0.4V 12
Clock Frequency fSMB 10 400 kHz 12
Spike Suppression tSP 50 ns 12
Bus Free Time Stop to Start tBUF 1.3 μs 12
Hold Time: Start tHD:STA 0.6 μs 12
Setup Time: Start tSU:STA 0.6 μs 12
Setup Time: Stop tSU:STO 0.6 μs 12
Data Hold Time tHD:DAT 0 μs When transmitting to the master 12
Data Hold Time tHD:DAT 0.3 μs When receiving from the master 12
Data Setup Time tSU:DAT 100 ns 12
Clock Low Period tLOW 1.3 μs 12
Clock High Period tHIGH 0.6 μs 12
Clock/Data Fall time tFALL 300 ns Min = 20+0.1CLOAD ns 12
Clock/Data Rise time tRISE 300 ns Min = 20+0.1CLOAD ns 12
Capacitive Load CLOAD 400 pF per bus line 12
Temperature Resolution 0.125 °C 11
Conversion Time all Channels tCONV 150 ms default settings 11

CAD (KiCad official)

  • Symbol: EMC1413-A-AIZL-TR
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)
  • 3D model files: emc1413-a-aizl-tr-etched.step / emc1413-a-aizl-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); emc1413-a-aizl-tr.step / emc1413-a-aizl-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (54 pp, sha256 59cf383eb07ca8b0, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF