component
EL5160IWZ-T7
Public Made by Adomby adom
RENESAS Pre-ordered Chips, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownEL5160IWZ-T7
RENESAS · Pre-ordered Chips · SOT-23-6
EL5160IWZ-T7 from RENESAS, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output; the device has no internal current limiting, so a shorted output can exceed the absolute maximum output current (50mA maximum continuous) or power dissipation and destroy the device. |
| 2 | VS- | power_in | Negative supply; the part operates over a total supply span of 5V to 10V (for example ±2.5V to ±5V on dual supplies), and the absolute maximum supply voltage between VS+ and VS- is 13.2V. |
| 3 | IN+ | input | Non-inverting input; the input range extends to within 2V of either supply (±3V common-mode range on ±5V supplies). |
| 4 | IN- | input | Inverting input; stray capacitance at this node should be kept to a minimum and a ground plane is not recommended around this pin. |
| 5 | CE | input | Chip enable; the amplifier is disabled when CE is pulled to within 1V of the positive supply and is enabled when CE is floating or pulled at least 3V below the positive supply. |
| 6 | VS+ | power_in | Positive supply; the part operates over a total supply span of 5V to 10V, and the absolute maximum supply voltage between VS+ and VS- is 13.2V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOT-23-6 |
| Category | Interface ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Slew Rate (EL5160, EL5161 rows) | SR | 900 | 1700 | 2500 | V/µs | VO = -2.5V to +2.5V, AV = +2, RF = RG = 1kΩ, RL = 100Ω | 3 |
| Input Offset Voltage | VOS | -5 | 1.6 | 5 | mV | 3 | |
| Open Loop Transimpedance Gain | ROL | 800 | 2000 | kΩ | ±2.5VOUT into 150Ω | 3 | |
| Common Mode Input Range | CMIR | 3 | 3.3 | V | Guaranteed by CMRR test | 3 | |
| Common Mode Rejection Ratio | CMRR | 50 | 62 | 75 | dB | VIN = ±3V | 3 |
| Input Current Common Mode Rejection | -ICMR | -1 | 1 | µA/V | 3 | ||
| Input Current | +IIN | -4 | 4 | µA | 3 | ||
| Input Current | -IIN | -5 | 5 | µA | 3 | ||
| Input Resistance | RIN | 1.5 | 4 | 15 | MΩ | 3 | |
| Output Voltage Swing | VO | 3.1 | 3.4 | 3.8 | V | RL = 150Ω to GND | 4 |
| Output Voltage Swing | VO | 3.8 | 4 | 4.2 | V | RL = 1kΩ to GND | 4 |
| Output Current | IOUT | 40 | 70 | 140 | mA | RL = 10Ω to GND | 4 |
| Supply Current - Enabled, per Amplifier | ISON | 0.6 | 0.75 | 0.85 | mA | No load, VIN = 0V (EL5160, EL5161, EL5260, EL5261) | 4 |
| Supply Current - Disabled, per Amplifier | ISOFF+ | 0 | 10 | 25 | µA | No load, VIN = 0V, Only EL5160, EL5260, EL5360 | 4 |
| Supply Current - Disabled, per Amplifier | ISOFF- | -25 | -14 | 0 | µA | 4 | |
| Power Supply Rejection Ratio | PSRR | 65 | 74 | dB | DC, VS = ±4.75V to ±5.25V | 4 | |
| Input Current Power Supply Rejection | -IPSR | -0.5 | 0.1 | 0.5 | µA/V | DC, VS = ±4.75V to ±5.25V | 4 |
| CE Pin Input High Current | ICE, H | 1 | 5 | 25 | µA | CE = VS+ | 4 |
| CE Pin Input Low Current | ICE, L | -1 | 0 | 1 | µA | CE = (VS+) - 5V | 4 |
| Supply Voltage between VS+ and VS- | 13.2 | V | 3 | ||||
| Maximum Continuous Output Current | 50 | mA | 3 | ||||
| Slew Rate of VS+ to VS- | 1 | V/µs | 3 | ||||
| Maximum Operating Junction Temperature | 125 | °C | 3 | ||||
| Maximum Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Ambient Operating Temperature Range | -40 | 85 | °C | 3 | |||
| Supply Voltage Span (single or dual supply) | 5 | 10 | V | VS+ to VS-, single or dual supply | 1 | ||
| Thermal Resistance, junction-to-ambient, SOT23-5/6 | JA | 110 | °C/W | JEDEC JESD51-7 high effective thermal conductivity test board | 7 | ||
| Thermal Resistance, junction-to-ambient, SOT23-5/6 | JA | 256 | °C/W | JEDEC JESD51-3 low effective thermal conductivity test board | 7 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
EL5160IWZ-T7 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
el5160iwz-t7-etched.step/el5160iwz-t7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);el5160iwz-t7.step/el5160iwz-t7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (17 pp, sha256
503f6fa837fc069d, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).