component
EGA10603V24A0
Public Made by Adomby adom
INPAQ ESD And Surge Protection (TVS/ESD), 0603. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownEGA10603V24A0
INPAQ · ESD And Surge Protection (TVS/ESD) · 0603
EGA10603V24A0 from INPAQ, in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A | passive | One terminal of the bidirectional ESD suppressor (interchangeable with the other terminal), rated 24V max with 30V typical clamping and 0.25pF typical capacitance. |
| 2 | B | passive | Second terminal of the bidirectional ESD suppressor (interchangeable with the other terminal), protecting the line to IEC 61000-4-2 8kV contact and 15kV air discharge. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | INPAQ |
| Package | 0603 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rated voltage (max) | 24 | V | 5 | ||||
| Operating Temperature range | -40 | 85 | ℃ | 4 | |||
| Storage Temperature range (on board) | -40 | 85 | ℃ | on board | 4 | ||
| Capacitance (Cp) | Cp | 0.25 | 0.5 | pF | @1MHz, device capacitance measured with 1Vrms | 5 | |
| Leakage current | 0.01 | μA | @12VDC | 5 | |||
| Trigger voltage (Vt) | Vt | 300 | V | measured by Transmission Line Pulse (TLP) | 5 | ||
| Clamping voltage (Vc) | Vc | 30 | V | measured by Transmission Line Pulse (TLP) | 5 | ||
| Response time | 1 | ns | printed as <1ns | 5 | |||
| ESD pulse withstand times | 1000 | times | 5 | ||||
| Leakage current IL after bias humidity test | IL | 10 | µA | 85%RH, 85 ℃, rated voltage 12VDC, 1000 hrs (MIL-STD-202 Method 103) | 4 | ||
| Leakage current IL after thermal shock cycle | IL | 10 | µA | -40 to 85 ℃, 30 min, 5 cycles (JIS C 0025) | 4 | ||
| Leakage current IL after high temperature load voltage test | IL | 10 | µA | Rated voltage, 85 ℃, 1000 hrs (MIL-STD-202G Method 108) | 4 | ||
| Leakage current IL after solder leach resistance test | IL | 10 | µA | 260 ℃, 10s (MIL-STD-202G Method 210F) | 4 | ||
| Leakage current IL after vibration test | IL | 10 | µA | 10~55Hz, 1.5mm amplitude, 2 hours each X, Y, Z (MIL-STD-202G Method 201A) | 4 | ||
| Taping storage temperature | 5 | 40 | ℃ | taping package storage condition | 10 | ||
| Taping storage relative humidity | 65 | %RH | taping package storage condition | 10 | |||
| Taping storage time | 12 | months | taping package storage condition | 10 | |||
| Soldering gun tip temperature | 280 | ℃ | within 3 s, soldering gun under 30 W | 9 | |||
| Heat shock during soldering | 100 | ℃ | heat shock during soldering process | 8 | |||
| Reflow peak temperature (Tp) | Tp | 260 | ℃ | Pb-free reflow; printed tolerance +0/-5 ℃ | 9 | ||
| Reflow average ramp rate (Ts max to Tp) | 3 | ℃/second | Pb-free reflow, IPC-020c-5-1 reference | 9 | |||
| Reflow time maintained above TL | tL | 60 | 150 | seconds | TL = 217 ℃, Pb-free reflow | 9 | |
| Reflow time within 5 ℃ of actual peak temperature | 20 | 40 | seconds | Pb-free reflow | 9 | ||
| Reflow ramp-down rate | 6 | ℃/second | Pb-free reflow | 9 | |||
| Reflow time 25 ℃ to peak temperature | 8 | minutes | Pb-free reflow | 9 | |||
| Solder cream print thickness | 0.15 | 0.2 | mm | reflow solder cream printing mask | 8 |
CAD (KiCad official)
- Symbol:
EGA10603V24A0 - Footprint:
Diode_SMD:D_0603_1608Metric - 3D model: 0603 (KiCad packages3D, STEP)
- 3D model files:
ega10603v24a0-etched.step/ega10603v24a0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ega10603v24a0.step/ega10603v24a0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: INPAQ datasheet (10 pp, sha256
126750fcfe335d68, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).