main
Ray Publish 0.1.0 ff51969
{
  "slug": "eg4002a",
  "version": "0.1.0",
  "type": "component",
  "description": "EG Micro Human Body Sensing Sensor, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "eg4002a",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "eg4002a.kicad_sym",
    "eg4002a.kicad_mod",
    "eg4002a.glb",
    "eg4002a.step",
    "eg4002a.lbr",
    "docs/hero.png",
    "docs/eg4002a-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "eg4002a-hero.glb",
    "eg4002a-hero.overlay.json",
    "eg4002a-etched.glb"
  ],
  "component": {
    "mpn": "EG4002A",
    "manufacturer": "EG Micro",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Sensors",
    "subcategory": "Human Body Sensing Sensor",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/126fdb8e6c14d5906b77176a3c844e6d.pdf",
    "parts": {
      "symbol": "eg4002a.kicad_sym",
      "footprint": "eg4002a.kicad_mod",
      "model_3d": "eg4002a-hero.glb",
      "model_3d_plain": "eg4002a-etched.glb",
      "model_3d_step": "eg4002a-etched.step",
      "model_3d_step_plain": "eg4002a.step",
      "lbr": "eg4002a.lbr"
    },
    "distributor_links": {
      "lcsc": "C2924883"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T18:51:57Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "1OUT",
        "type": "output",
        "description": "Output of the internal first-stage operational amplifier (OP1), with an absolute maximum of -0.3 V to 7 V relative to GND."
      },
      {
        "number": "2",
        "name": "1IN-",
        "type": "input",
        "description": "Inverting input of the internal first-stage operational amplifier, with an absolute maximum of -0.3 V to 7 V relative to GND."
      },
      {
        "number": "3",
        "name": "VC",
        "type": "input",
        "description": "Trigger-inhibit input: when VC is below 0.2·VDD the OUT pin is held low and triggering is blocked, and when VC is above 0.2·VDD triggering is enabled."
      },
      {
        "number": "4",
        "name": "A",
        "type": "input",
        "description": "Retriggerable/non-retriggerable control: A = '1' enables retriggering, and A = '0' selects non-retriggerable operation."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Chip ground reference pin."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "output",
        "description": "Active-high control signal output that sources or sinks +/-25 mA at VDD = 5 V and +/-10 mA at VDD = 3 V."
      },
      {
        "number": "7",
        "name": "CT",
        "type": "input",
        "description": "Oscillator timing pin that requires an external capacitor to GND and a pull-up resistor to VDD, where the pull-up resistor must be greater than 100 kΩ."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply input with an operating range of +3 V to +6 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives one pin definition figure (Fig. 4-1) and one pin description table for the 8-pin; The EG4002A suffix only sets the timing ratio K=5 (Tx=100000 Tosc, Ti=20000 Tosc, per table 8.2). It; Pin 7 (CT) is typed as input because the datasheet labels it 'I'. It is really an RC timing node tie"
        ],
        "pages_sent": 13,
        "cost_usd": 0.0439,
        "at": "2026-10-30T18:51:46"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/126fdb8e6c14d5906b77176a3c844e6d.pdf",
        "pages": 13,
        "sha256": "b8900d329e8e5b7a",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "eg4002a.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "eg4002a-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "81fa110f600a20a0525f22740cc8a9808027824b52df5b3efa7686578d67d9ec",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}