main
Ray eg1162: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) ab492b1
{
  "schema_version": 1,
  "type": "component",
  "slug": "eg1162",
  "title": "EG1162",
  "brief": "EG Micro DC-DC Converters, SOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.2.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "eg1162"
  ],
  "component": {
    "mpn": "EG1162",
    "manufacturer": "EG Micro",
    "package": "SOP-16",
    "pin_count": 16,
    "category": "PMIC",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121400_EG-Micro-EG1162_C2929082.pdf",
    "parts": {
      "symbol": "eg1162.kicad_sym",
      "footprint": "eg1162.kicad_mod",
      "model_3d": "eg1162-etched.glb",
      "model_3d_plain": "eg1162.glb",
      "model_3d_step": "eg1162-etched.step",
      "model_3d_step_plain": "eg1162.step",
      "lbr": "eg1162.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "REF3.3V",
        "type": "power_out",
        "description": "3.3V internal reference output, maximum output current 50mA. Bypass with a small (e.g. 1uF) ceramic capacitor placed close to the pin."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Chip enable pin. Comparator threshold 1.2V (typ). When EN < 1.2V, the chip enters standby and the 3.3V reference output is disabled. External resistor divider (R20/R21) sets the start/stop voltages."
      },
      {
        "number": "3",
        "name": "SD",
        "type": "input",
        "description": "Shutdown input. Logic HIGH disables the PWM output; logic LOW enables PWM output. Threshold approximately 3V."
      },
      {
        "number": "4",
        "name": "SS",
        "type": "input",
        "description": "Soft-start pin. Connect an external capacitor to GND; the capacitor's ramp rate determines the soft-start time."
      },
      {
        "number": "5",
        "name": "VSS",
        "type": "power_in",
        "description": "Analog signal ground (AGND) for the chip."
      },
      {
        "number": "6",
        "name": "CP",
        "type": "input",
        "description": "Oscillator timing capacitor pin. External capacitor Cp sets the PWM switching frequency: f = (18 x 10^6) / Cp (Cp in pF). Example: Cp = 270pF → ~67 kHz."
      },
      {
        "number": "7",
        "name": "ERRO",
        "type": "output",
        "description": "Voltage-loop error amplifier output. Used for external loop compensation. Output current capability typ 20uA (15-25uA)."
      },
      {
        "number": "8",
        "name": "FB",
        "type": "input",
        "description": "Voltage-loop error amplifier inverting (negative) input. Internal reference 1.2V (typ). Set output voltage via divider: Vout = (1 + R1/R2) x 1.2V."
      },
      {
        "number": "9",
        "name": "SDLIN",
        "type": "input",
        "description": "Low-side MOSFET current-sense comparator input. Trip threshold 180mV relative to COM (PGND). Used for cycle-by-cycle low-side current limit."
      },
      {
        "number": "10",
        "name": "LO",
        "type": "output",
        "description": "Low-side gate driver output. Controls the turn-on/turn-off of the low-side (synchronous rectifier) power MOSFET. Source/sink capability ~1.8A/2A peak."
      },
      {
        "number": "11",
        "name": "COM",
        "type": "power_in",
        "description": "Power ground (PGND) return for the low-side driver."
      },
      {
        "number": "12",
        "name": "VCC",
        "type": "power_in",
        "description": "Low-side chip supply. Operating range 4.5V-20V (absolute max 20V). UVLO thresholds: ON = 4.6V, OFF = 3.8V. Requires a ~10uF storage capacitor to GND."
      },
      {
        "number": "13",
        "name": "SDHIN",
        "type": "input",
        "description": "High-side MOSFET current-sense comparator input. Trip threshold 180mV relative to VS. Used for cycle-by-cycle high-side (peak) current limit."
      },
      {
        "number": "14",
        "name": "VS",
        "type": "output",
        "description": "High-side floating ground / switch node reference. Connects to the source of the high-side MOSFET and the bootstrap capacitor's low side. Absolute rating VB-20 to VB+0.3V."
      },
      {
        "number": "15",
        "name": "VB",
        "type": "power_in",
        "description": "High-side floating (bootstrap) supply. Typical operating range 4V to 600V referenced to VS. Bootstrap capacitor connects between VB and VS."
      },
      {
        "number": "16",
        "name": "HO",
        "type": "output",
        "description": "High-side floating gate driver output. Controls the turn-on/turn-off of the high-side power MOSFET, swinging between VS and VB. Source/sink capability ~1.8A/2A peak."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121400_EG-Micro-EG1162_C2929082.pdf",
        "pages": 13,
        "sha256": "5379721bee5f9bbb",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "eg1162.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "eg1162-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "14d4071b7d4f766f1c0448b0c9a8c39af9f4a33d6d4062893ed59e8a67237df9",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "EG Micro",
      "Package": "SOP-16",
      "Category": "PMIC",
      "Pins": "16"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "eg1162"
  ],
  "discovery_pitch": "EG1162 (EG Micro) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "eg1162.kicad_sym",
    "eg1162.kicad_mod",
    "eg1162.glb",
    "eg1162.step",
    "eg1162-etched.step",
    "eg1162.lbr",
    "docs/hero.png",
    "docs/eg1162-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-24T20:16:03.021Z"
}