DS90UB913ATRTVRQ1

{
  "slug": "ds90ub913atrtvrq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Serializers, Deserializers, WQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "ds90ub913atrtvrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ds90ub913atrtvrq1.kicad_sym",
    "ds90ub913atrtvrq1.kicad_mod",
    "ds90ub913atrtvrq1.glb",
    "ds90ub913atrtvrq1.step",
    "ds90ub913atrtvrq1.lbr",
    "docs/hero.png",
    "docs/ds90ub913atrtvrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ds90ub913atrtvrq1-hero.glb",
    "ds90ub913atrtvrq1-hero.overlay.json"
  ],
  "component": {
    "mpn": "DS90UB913ATRTVRQ1",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "Interface",
    "subcategory": "Serializers, Deserializers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ds90ub913a-q1",
    "parts": {
      "symbol": "ds90ub913atrtvrq1.kicad_sym",
      "footprint": "ds90ub913atrtvrq1.kicad_mod",
      "model_3d": "ds90ub913atrtvrq1-hero.glb",
      "model_3d_plain": "ds90ub913atrtvrq1.glb",
      "model_3d_step": "ds90ub913atrtvrq1-etched.step",
      "model_3d_step_plain": "ds90ub913atrtvrq1.step",
      "lbr": "ds90ub913atrtvrq1.lbr"
    },
    "distributor_links": {
      "lcsc": 962540,
      "digikey": "296-46295-2-ND",
      "mouser": "595-S90UB913ATRTVRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T18:48:39Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-46295-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-S90UB913ATRTVRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "HSYNC",
        "type": "input",
        "description": "Horizontal SYNC LVCMOS input with pulldown; in 10-bit mode restricted to no more than one transition per 10 PCLK cycles, leave open if unused."
      },
      {
        "number": "2",
        "name": "VSYNC",
        "type": "input",
        "description": "Vertical SYNC LVCMOS input with pulldown; in 10-bit mode restricted to no more than one transition per 10 PCLK cycles, leave open if unused."
      },
      {
        "number": "3",
        "name": "PCLK",
        "type": "input",
        "description": "Pixel clock LVCMOS input with pulldown; strobe edge set by TRFB control register 0x03[0]."
      },
      {
        "number": "4",
        "name": "SCL",
        "type": "bidirectional",
        "description": "Open-drain clock line of the I2C-compatible bidirectional control bus, requires an external pullup resistor to VDDIO."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Open-drain data line of the I2C-compatible bidirectional control bus, requires an external pullup resistor to VDDIO."
      },
      {
        "number": "6",
        "name": "ID[x]",
        "type": "input",
        "description": "Analog device I2C address select, set with a resistor (RID) to ground and a 10-kΩ pullup to the 1.8 V rail."
      },
      {
        "number": "7",
        "name": "RES",
        "type": "input",
        "description": "Reserved LVCMOS input with pulldown that must be tied LOW."
      },
      {
        "number": "8",
        "name": "MODE",
        "type": "input",
        "description": "Analog device mode select between imager PCLK and external oscillator operation, set with a resistor (Rmode) to ground and a 10-kΩ pullup to 1.8 V."
      },
      {
        "number": "9",
        "name": "PDB",
        "type": "input",
        "description": "Power-down input with pulldown: H enables the serializer, L powers it down, shutting down the PLL and resetting registers to defaults."
      },
      {
        "number": "10",
        "name": "VDDPLL",
        "type": "power_in",
        "description": "Analog PLL power supply, 1.8 V ±5%."
      },
      {
        "number": "11",
        "name": "VDDT",
        "type": "power_in",
        "description": "Analog Tx power supply, 1.8 V ±5%."
      },
      {
        "number": "12",
        "name": "DOUT-",
        "type": "bidirectional",
        "description": "Inverting CML differential output and bidirectional control channel input, AC coupled with 0.1 µF (0.047 µF in series with 50 Ω to GND for single-ended coax)."
      },
      {
        "number": "13",
        "name": "DOUT+",
        "type": "bidirectional",
        "description": "Non-inverting CML differential output and bidirectional control channel input, must be AC coupled with a 0.1-µF capacitor."
      },
      {
        "number": "14",
        "name": "VDDCML",
        "type": "power_in",
        "description": "CML and bidirectional channel driver power supply, 1.8 V ±5%."
      },
      {
        "number": "15",
        "name": "GPO[0]",
        "type": "output",
        "description": "LVCMOS general-purpose output driven from deserializer GPIO0 or a local register, leave open if unused."
      },
      {
        "number": "16",
        "name": "GPO[1]",
        "type": "output",
        "description": "LVCMOS general-purpose output driven from deserializer GPIO1 or a local register, leave open if unused."
      },
      {
        "number": "17",
        "name": "GPO[2]/CLKOUT",
        "type": "output",
        "description": "LVCMOS general-purpose output or external-oscillator-mode clock output; pull to GND with a minimum 40-kΩ resistor to ensure LOW when PDB goes HIGH."
      },
      {
        "number": "18",
        "name": "GPO[3]/CLKIN",
        "type": "bidirectional",
        "description": "LVCMOS general-purpose output or external oscillator clock input, leave open if unused."
      },
      {
        "number": "19",
        "name": "DIN[0]",
        "type": "input",
        "description": "Parallel data input bit 0, LVCMOS with pulldown; unused inputs should be No Connect."
      },
      {
        "number": "20",
        "name": "DIN[1]",
        "type": "input",
        "description": "Parallel data input bit 1, LVCMOS with pulldown; unused inputs should be No Connect."
      },
      {
        "number": "21",
        "name": "DIN[2]",
        "type": "input",
        "description": "Parallel data input bit 2, LVCMOS with pulldown; unused inputs should be No Connect."
      },
      {
        "number": "22",
        "name": "DIN[3]",
        "type": "input",
        "description": "Parallel data input bit 3, LVCMOS with pulldown; unused inputs should be No Connect."
      },
      {
        "number": "23",
        "name": "DIN[4]",
        "type": "input",
        "description": "Parallel data input bit 4, LVCMOS with pulldown; unused inputs should be No Connect."
      },
      {
        "number": "24",
        "name": "DIN[5]",
        "type": "input",
        "description": "Parallel data input bit 5, LVCMOS with pulldown; unused inputs should be No Connect."
      },
      {
        "number": "25",
        "name": "VDDIO",
        "type": "power_in",
        "description": "I/O stage power for single-ended inputs and SDA/SCL, connectable to 1.8 V ±5%, 2.8 V ±10% or 3.3 V ±10%."
      },
      {
        "number": "26",
        "name": "DIN[6]",
        "type": "input",
        "description": "Parallel data input bit 6, LVCMOS with pulldown; unused inputs should be No Connect."
      },
      {
        "number": "27",
        "name": "DIN[7]",
        "type": "input",
        "description": "Parallel data input bit 7, LVCMOS with pulldown; unused inputs should be No Connect."
      },
      {
        "number": "28",
        "name": "VDDD",
        "type": "power_in",
        "description": "Digital power supply, 1.8 V ±5%."
      },
      {
        "number": "29",
        "name": "DIN[8]",
        "type": "input",
        "description": "Parallel data input bit 8, LVCMOS with pulldown; unused inputs should be No Connect."
      },
      {
        "number": "30",
        "name": "DIN[9]",
        "type": "input",
        "description": "Parallel data input bit 9, LVCMOS with pulldown; active in 10-bit and 12-bit modes, unused inputs should be No Connect."
      },
      {
        "number": "31",
        "name": "DIN[10]",
        "type": "input",
        "description": "Parallel data input bit 10, LVCMOS with pulldown; active only in 12-bit mode, inactive and No Connect in 10-bit mode."
      },
      {
        "number": "32",
        "name": "DIN[11]",
        "type": "input",
        "description": "Parallel data input bit 11, LVCMOS with pulldown; active only in 12-bit mode, inactive and No Connect in 10-bit mode."
      },
      {
        "number": "33",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: DAP (Drain Assist Pad) shown in pin configuration diagram but not listed in formal pin function tabl",
          "exposed pad 33 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 24,
        "cost_usd": 0.2825,
        "at": "2026-10-05T18:48:23"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ds90ub913a-q1",
        "pages": 57,
        "sha256": "ace8cb05a1a45ee1",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  }
}