DRV8830DGQR

Texas Instruments · Brushed DC Motor Drivers · MSOP-10-EP

DRV8830DGQR from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT2	output	H-bridge output 2 for motor winding connection.
2	ISENSE	bidirectional	Current limit programming pin; connect current sense resistor to GND; resistor value sets H-bridge output current limit level.
3	OUT1	output	H-bridge output 1 for motor winding connection.
4	VCC	power_in	Device and motor power supply voltage from 2.75 V to 6.8 V; bypass to GND with minimum 0.1-μF ceramic capacitor.
5	GND	power_in	Device ground reference.
6	FAULTn	tri_state	Fault output indicator; open-drain output driven low when thermal or overcurrent fault condition is present.
7	A0	input	I2C device address select 0; connect to GND, VCC, or leave open to set device base address.
8	A1	input	I2C device address select 1; connect to GND, VCC, or leave open to set device base address.
9	SDA	bidirectional	I2C serial data line.
10	SCL	input	I2C serial clock input line.
11	EP	passive	Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	MSOP-10-EP
Category	Motor Driver ICs
Pins	11

CAD (KiCad official)

Symbol: DRV8830DGQR
Footprint: Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm
3D model: MSOP-10-EP (KiCad packages3D, STEP)
3D model files: drv8830dgqr-etched.step / drv8830dgqr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); drv8830dgqr.step / drv8830dgqr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (34 pp, sha256 f34956fc86c6e025, retrieved 2026-10-01, tier: lcsc)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

# DRV8830DGQR

**Texas Instruments** · Brushed DC Motor Drivers · MSOP-10-EP

DRV8830DGQR from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT2 | output | H-bridge output 2 for motor winding connection. |
| 2 | ISENSE | bidirectional | Current limit programming pin; connect current sense resistor to GND; resistor value sets H-bridge output current limit level. |
| 3 | OUT1 | output | H-bridge output 1 for motor winding connection. |
| 4 | VCC | power_in | Device and motor power supply voltage from 2.75 V to 6.8 V; bypass to GND with minimum 0.1-μF ceramic capacitor. |
| 5 | GND | power_in | Device ground reference. |
| 6 | FAULTn | tri_state | Fault output indicator; open-drain output driven low when thermal or overcurrent fault condition is present. |
| 7 | A0 | input | I2C device address select 0; connect to GND, VCC, or leave open to set device base address. |
| 8 | A1 | input | I2C device address select 1; connect to GND, VCC, or leave open to set device base address. |
| 9 | SDA | bidirectional | I2C serial data line. |
| 10 | SCL | input | I2C serial clock input line. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10-EP |
| Category | Motor Driver ICs |
| Pins | 11 |

## CAD (KiCad official)

- Symbol: `DRV8830DGQR`
- Footprint: `Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm`
- 3D model: MSOP-10-EP (KiCad packages3D, STEP)
- 3D model files: `drv8830dgqr-etched.step` / `drv8830dgqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `drv8830dgqr.step` / `drv8830dgqr.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/drv8830) (34 pp, sha256 `f34956fc86c6e025`, retrieved 2026-10-01, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/drv8830dgqr-datasheet.pdf)