component
DRV8830DGQR
Public Made by Adomby adom
Texas Instruments Brushed DC Motor Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDRV8830DGQR
Texas Instruments · Brushed DC Motor Drivers · MSOP-10-EP
DRV8830DGQR from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT2 | output | H-bridge output 2 for motor winding connection. |
| 2 | ISENSE | bidirectional | Current limit programming pin; connect current sense resistor to GND; resistor value sets H-bridge output current limit level. |
| 3 | OUT1 | output | H-bridge output 1 for motor winding connection. |
| 4 | VCC | power_in | Device and motor power supply voltage from 2.75 V to 6.8 V; bypass to GND with minimum 0.1-μF ceramic capacitor. |
| 5 | GND | power_in | Device ground reference. |
| 6 | FAULTn | tri_state | Fault output indicator; open-drain output driven low when thermal or overcurrent fault condition is present. |
| 7 | A0 | input | I2C device address select 0; connect to GND, VCC, or leave open to set device base address. |
| 8 | A1 | input | I2C device address select 1; connect to GND, VCC, or leave open to set device base address. |
| 9 | SDA | bidirectional | I2C serial data line. |
| 10 | SCL | input | I2C serial clock input line. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10-EP |
| Category | Motor Driver ICs |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
DRV8830DGQR - Footprint:
Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm - 3D model: MSOP-10-EP (KiCad packages3D, STEP)
- 3D model files:
drv8830dgqr-etched.step/drv8830dgqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);drv8830dgqr.step/drv8830dgqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
f34956fc86c6e025, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).