DRV8350RSRGZR

{
  "slug": "drv8350rsrgzr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Brushless DC (BLDC) Motor Driver, VQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "drv8350rsrgzr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "drv8350rsrgzr.kicad_sym",
    "drv8350rsrgzr.kicad_mod",
    "drv8350rsrgzr.glb",
    "drv8350rsrgzr.step",
    "drv8350rsrgzr.lbr",
    "docs/hero.png",
    "docs/drv8350rsrgzr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "drv8350rsrgzr-hero.glb",
    "drv8350rsrgzr-hero.overlay.json"
  ],
  "component": {
    "mpn": "DRV8350RSRGZR",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-48-EP(7x7)",
    "pin_count": 49,
    "category": "Motor Driver ICs",
    "subcategory": "Brushless DC (BLDC) Motor Driver",
    "datasheet": "https://www.ti.com/cn/lit/gpn/drv8353",
    "parts": {
      "symbol": "drv8350rsrgzr.kicad_sym",
      "footprint": "drv8350rsrgzr.kicad_mod",
      "model_3d": "drv8350rsrgzr-hero.glb",
      "model_3d_plain": "drv8350rsrgzr.glb",
      "model_3d_step": "drv8350rsrgzr-etched.step",
      "model_3d_step_plain": "drv8350rsrgzr.step",
      "lbr": "drv8350rsrgzr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2150748",
      "digikey": "296-DRV8350RSRGZRTR-ND",
      "mouser": "595-DRV8350RSRGZR"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T07:15:26Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-DRV8350RSRGZRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-DRV8350RSRGZR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Device primary ground that must be connected to system ground."
      },
      {
        "number": "2",
        "name": "VGLS",
        "type": "power_out",
        "description": "11-V internal regulator output; connect a X5R or X7R, 1-µF, 16-V ceramic capacitor between VGLS and GND."
      },
      {
        "number": "3",
        "name": "CPL",
        "type": "passive",
        "description": "Charge pump switching node; connect a X5R or X7R, 47-nF, VDRAIN-rated ceramic capacitor between CPH and CPL."
      },
      {
        "number": "4",
        "name": "CPH",
        "type": "passive",
        "description": "Charge pump switching node; connect a X5R or X7R, 47-nF, VDRAIN-rated ceramic capacitor between CPH and CPL."
      },
      {
        "number": "5",
        "name": "VM",
        "type": "power_in",
        "description": "Gate driver power supply input that connects to VDRAIN or a separate gate driver supply, with a X5R or X7R 0.1-µF VM-rated capacitor and at least 10 µF of local capacitance to GND."
      },
      {
        "number": "6",
        "name": "VDRAIN",
        "type": "input",
        "description": "High-side MOSFET drain sense input and charge pump reference; connect to the common point of the MOSFET drains."
      },
      {
        "number": "7",
        "name": "VCP",
        "type": "power_out",
        "description": "Charge pump output; connect a X5R or X7R, 1-µF, 16-V ceramic capacitor between VCP and VDRAIN."
      },
      {
        "number": "8",
        "name": "GHA",
        "type": "output",
        "description": "High-side gate driver output; connect to the gate of the high-side power MOSFET."
      },
      {
        "number": "9",
        "name": "SHA",
        "type": "input",
        "description": "High-side source sense input; connect to the high-side power MOSFET source."
      },
      {
        "number": "10",
        "name": "GLA",
        "type": "output",
        "description": "Low-side gate driver output; connect to the gate of the low-side power MOSFET."
      },
      {
        "number": "11",
        "name": "SLA",
        "type": "input",
        "description": "Low-side source sense input; connect to the low-side power MOSFET source."
      },
      {
        "number": "12",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; this pin can be left floating or connected to system ground."
      },
      {
        "number": "13",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; this pin can be left floating or connected to system ground."
      },
      {
        "number": "14",
        "name": "SLB",
        "type": "input",
        "description": "Low-side source sense input; connect to the low-side power MOSFET source."
      },
      {
        "number": "15",
        "name": "GLB",
        "type": "output",
        "description": "Low-side gate driver output; connect to the gate of the low-side power MOSFET."
      },
      {
        "number": "16",
        "name": "SHB",
        "type": "input",
        "description": "High-side source sense input; connect to the high-side power MOSFET source."
      },
      {
        "number": "17",
        "name": "GHB",
        "type": "output",
        "description": "High-side gate driver output; connect to the gate of the high-side power MOSFET."
      },
      {
        "number": "18",
        "name": "GHC",
        "type": "output",
        "description": "High-side gate driver output; connect to the gate of the high-side power MOSFET."
      },
      {
        "number": "19",
        "name": "SHC",
        "type": "input",
        "description": "High-side source sense input; connect to the high-side power MOSFET source."
      },
      {
        "number": "20",
        "name": "GLC",
        "type": "output",
        "description": "Low-side gate driver output; connect to the gate of the low-side power MOSFET."
      },
      {
        "number": "21",
        "name": "SLC",
        "type": "input",
        "description": "Low-side source sense input; connect to the low-side power MOSFET source."
      },
      {
        "number": "22",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; this pin can be left floating or connected to system ground."
      },
      {
        "number": "23",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; this pin can be left floating or connected to system ground."
      },
      {
        "number": "24",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; this pin can be left floating or connected to system ground."
      },
      {
        "number": "25",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; this pin can be left floating or connected to system ground."
      },
      {
        "number": "26",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; this pin can be left floating or connected to system ground."
      },
      {
        "number": "27",
        "name": "AGND",
        "type": "power_in",
        "description": "Device analog ground that must be connected to system ground."
      },
      {
        "number": "28",
        "name": "nFAULT",
        "type": "output",
        "description": "Open-drain fault indicator output that is pulled logic low during a fault and requires an external pullup resistor."
      },
      {
        "number": "29",
        "name": "SDO",
        "type": "output",
        "description": "Open-drain serial data output that shifts data out on the rising edge of SCLK and requires an external pullup resistor."
      },
      {
        "number": "30",
        "name": "SDI",
        "type": "input",
        "description": "Serial data input; data is captured on the falling edge of SCLK."
      },
      {
        "number": "31",
        "name": "SCLK",
        "type": "input",
        "description": "Serial clock input; serial data is shifted out and captured on the corresponding rising and falling edges of this pin."
      },
      {
        "number": "32",
        "name": "nSCS",
        "type": "input",
        "description": "Serial chip select; a logic low on this pin enables serial interface communication."
      },
      {
        "number": "33",
        "name": "ENABLE",
        "type": "input",
        "description": "Gate driver enable; a logic low puts the device into low-power sleep mode, and an 8 to 40-µs low pulse can reset fault conditions."
      },
      {
        "number": "34",
        "name": "INHA",
        "type": "input",
        "description": "High-side gate driver control input that controls the output of the high-side gate driver."
      },
      {
        "number": "35",
        "name": "INLA",
        "type": "input",
        "description": "Low-side gate driver control input that controls the output of the low-side gate driver."
      },
      {
        "number": "36",
        "name": "INHB",
        "type": "input",
        "description": "High-side gate driver control input that controls the output of the high-side gate driver."
      },
      {
        "number": "37",
        "name": "INLB",
        "type": "input",
        "description": "Low-side gate driver control input that controls the output of the low-side gate driver."
      },
      {
        "number": "38",
        "name": "INHC",
        "type": "input",
        "description": "High-side gate driver control input that controls the output of the high-side gate driver."
      },
      {
        "number": "39",
        "name": "INLC",
        "type": "input",
        "description": "Low-side gate driver control input that controls the output of the low-side gate driver."
      },
      {
        "number": "40",
        "name": "DVDD",
        "type": "power_out",
        "description": "5-V internal regulator output; connect a X5R or X7R, 1-µF, 6.3-V ceramic capacitor between DVDD and DGND, and it can source up to 10 mA externally."
      },
      {
        "number": "41",
        "name": "DGND",
        "type": "power_in",
        "description": "Device digital ground that must be connected to system ground."
      },
      {
        "number": "42",
        "name": "SW",
        "type": "output",
        "description": "Buck switch node; connect to an inductor, diode, and the CB bootstrap capacitor."
      },
      {
        "number": "43",
        "name": "VIN",
        "type": "power_in",
        "description": "Buck regulator power supply input; place a X5R or X7R, VM-rated ceramic capacitor between VIN and GND."
      },
      {
        "number": "44",
        "name": "VCC",
        "type": "power_out",
        "description": "7-V internal regulator output that supplies the buck switch gate; connect a X5R or X7R, 0.47-µF, 16-V ceramic capacitor between VCC and GND."
      },
      {
        "number": "45",
        "name": "BST",
        "type": "power_out",
        "description": "Buck regulator bootstrap input; connect a X5R or X7R, 0.01-µF, 16-V capacitor between BST and SW."
      },
      {
        "number": "46",
        "name": "RCL",
        "type": "input",
        "description": "Current limit off-time set input; connect a resistor between RCL and GND."
      },
      {
        "number": "47",
        "name": "RT/SD",
        "type": "input",
        "description": "On-time set and remote shutdown input; connect a resistor between RT/SD and VIN."
      },
      {
        "number": "48",
        "name": "FB",
        "type": "input",
        "description": "Buck feedback input; a resistor divider from the buck post-inductor output to this pin sets the buck output voltage."
      },
      {
        "number": "49",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed thermal pad of the VQFN-48 package is mentioned on the drawings but is not given a numbe; The datasheet labels these pins only as PWR. The KiCad ERC classes (power_in for supply and ground i; nFAULT, SDO are open-drain outputs in the datasheet; the allowed type set has no open-drain class, s",
          "exposed pad 49 added from the footprint"
        ],
        "pages_sent": 14,
        "cost_usd": 0.1402,
        "at": "2026-10-11T07:15:07"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/drv8353",
        "pages": 101,
        "sha256": "4ab34376642b461e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 49,
        "described": 49,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "drv8350rsrgzr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.0,
          7.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f2b38b0b4bf967c77e683e8d4599608b9f0503055ec535b93c4ebb5d0163e916",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "drv8350rsrgzr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.0,
          7.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6205d9a3bfb95ee5ab800db4cb0baac2543f6695cfc5fc40be277efe62af56a5",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}