main
Ray Publish 0.1.1 02cf361
{
  "slug": "drv8323hrtat",
  "version": "0.1.1",
  "type": "component",
  "description": "Texas Instruments Motor Driver ICs, WQFN-40-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "drv8323hrtat",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "drv8323hrtat.kicad_sym",
    "drv8323hrtat.kicad_mod",
    "drv8323hrtat.glb",
    "drv8323hrtat.step",
    "drv8323hrtat.lbr",
    "docs/hero.png",
    "docs/drv8323hrtat-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "drv8323hrtat-hero.glb",
    "drv8323hrtat-hero.overlay.json",
    "drv8323hrtat-etched.step"
  ],
  "component": {
    "mpn": "DRV8323HRTAT",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-40-EP(6x6)",
    "pin_count": 41,
    "category": "Power Supply Chip",
    "subcategory": "Motor Driver ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/drv8323",
    "parts": {
      "symbol": "drv8323hrtat.kicad_sym",
      "footprint": "drv8323hrtat.kicad_mod",
      "model_3d": "drv8323hrtat-hero.glb",
      "model_3d_plain": "drv8323hrtat.glb",
      "model_3d_step": "drv8323hrtat-etched.step",
      "model_3d_step_plain": "drv8323hrtat.step",
      "lbr": "drv8323hrtat.lbr"
    },
    "distributor_links": {
      "lcsc": "C2150673",
      "digikey": "296-47094-2-ND",
      "mouser": "595-DRV8323HRTAT"
    },
    "distributor_check": {
      "checked_at": "2026-10-03T05:52:51Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-47094-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-DRV8323HRTAT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CPL",
        "type": "power_in",
        "description": "Charge pump negative switching node; connect X5R or X7R 47nF VM-rated ceramic capacitor between CPH and CPL."
      },
      {
        "number": "2",
        "name": "CPH",
        "type": "power_in",
        "description": "Charge pump switching node; connect X5R or X7R 47nF VM-rated ceramic capacitor between CPH and CPL pins."
      },
      {
        "number": "3",
        "name": "VCP",
        "type": "power_out",
        "description": "Charge pump output; connect X5R or X7R 1µF 25V ceramic capacitor between VCP and VM pins."
      },
      {
        "number": "4",
        "name": "VM",
        "type": "power_in",
        "description": "Gate driver power supply input 6V to 60V; connect to motor power supply and VDRAIN with X5R/X7R 0.1µF VM-rated and ≥10µF bulk capacitors."
      },
      {
        "number": "5",
        "name": "VDRAIN",
        "type": "input",
        "description": "High-side MOSFET drain input; connect to the common point of high-side MOSFET drains for VDS monitor."
      },
      {
        "number": "6",
        "name": "GHA",
        "type": "output",
        "description": "High-side gate driver output; connect to high-side power MOSFET gate with up to 1A peak current drive capability."
      },
      {
        "number": "7",
        "name": "SHA",
        "type": "bidirectional",
        "description": "High-side source pin; connect to high-side MOSFET source for VDS monitoring and gate driver sink current return path."
      },
      {
        "number": "8",
        "name": "GLA",
        "type": "output",
        "description": "Low-side gate driver output; connect to low-side power MOSFET gate with up to 2A peak sink current capability."
      },
      {
        "number": "9",
        "name": "SPA",
        "type": "input",
        "description": "Low-side shunt amplifier input and VDS monitor negative input; connect to current shunt high side or SNA if CSA unused."
      },
      {
        "number": "10",
        "name": "SNA",
        "type": "input",
        "description": "Current sense amplifier input; connect to current sampling resistor low side or PGND if CSA unused."
      },
      {
        "number": "11",
        "name": "SNB",
        "type": "input",
        "description": "Current sense amplifier input; connect to current sampling resistor low side or PGND if CSA unused."
      },
      {
        "number": "12",
        "name": "SPB",
        "type": "input",
        "description": "Low-side shunt amplifier input and VDS monitor negative input; connect to current shunt high side or SNB if CSA unused."
      },
      {
        "number": "13",
        "name": "GLB",
        "type": "output",
        "description": "Low-side gate driver output; connect to low-side power MOSFET gate with up to 2A peak sink current capability."
      },
      {
        "number": "14",
        "name": "SHB",
        "type": "bidirectional",
        "description": "High-side source pin; connect to high-side MOSFET source for VDS monitoring and gate driver sink current return path."
      },
      {
        "number": "15",
        "name": "GHB",
        "type": "output",
        "description": "High-side gate driver output; connect to high-side power MOSFET gate with up to 1A peak current drive capability."
      },
      {
        "number": "16",
        "name": "GHC",
        "type": "output",
        "description": "High-side gate driver output; connect to high-side power MOSFET gate with up to 1A peak current drive capability."
      },
      {
        "number": "17",
        "name": "SHC",
        "type": "bidirectional",
        "description": "High-side source pin; connect to high-side MOSFET source for VDS monitoring and gate driver sink current return path."
      },
      {
        "number": "18",
        "name": "GLC",
        "type": "output",
        "description": "Low-side gate driver output; connect to low-side power MOSFET gate with up to 2A peak sink current capability."
      },
      {
        "number": "19",
        "name": "SPC",
        "type": "input",
        "description": "Low-side shunt amplifier input and VDS monitor negative input; connect to current shunt high side or SNC if CSA unused."
      },
      {
        "number": "20",
        "name": "SNC",
        "type": "input",
        "description": "Current sense amplifier input; connect to current sampling resistor low side or PGND if CSA unused."
      },
      {
        "number": "21",
        "name": "SOC",
        "type": "output",
        "description": "Current sense amplifier output for phase C; keep unconnected if current sense amplifier CSA not used."
      },
      {
        "number": "22",
        "name": "SOB",
        "type": "output",
        "description": "Current sense amplifier output for phase B; keep unconnected if current sense amplifier CSA not used."
      },
      {
        "number": "23",
        "name": "SOA",
        "type": "output",
        "description": "Current sense amplifier output for phase A; keep unconnected if current sense amplifier CSA not used."
      },
      {
        "number": "24",
        "name": "VREF",
        "type": "power_out",
        "description": "Current sense amplifier power input and reference 3V to 5.5V; connect X5R or X7R 0.1µF 6.3V ceramic capacitor between VREF and AGND."
      },
      {
        "number": "25",
        "name": "nFAULT",
        "type": "tri_state",
        "description": "Fault indicator open-drain output pulled to logic low during fault condition; requires external pull-up resistor to logic supply."
      },
      {
        "number": "26",
        "name": "MODE",
        "type": "input",
        "description": "PWM input mode setting 4-level input set by external resistor for 6x/3x/1x/Independent PWM mode selection."
      },
      {
        "number": "27",
        "name": "IDRIVE",
        "type": "input",
        "description": "Gate driver output current setting 7-level input set by external resistor to select 10mA to 1A peak drive current."
      },
      {
        "number": "28",
        "name": "VDS",
        "type": "input",
        "description": "VDS monitoring trip point setting 7-level input set by external resistor to select overcurrent threshold 0.06V to 1.88V."
      },
      {
        "number": "29",
        "name": "GAIN",
        "type": "input",
        "description": "Amplifier gain setting 4-level input set by external resistor for current sense amplifier gain 5V/V to 40V/V selection."
      },
      {
        "number": "30",
        "name": "ENABLE",
        "type": "input",
        "description": "Gate driver enable input; logic low enables low-power sleep mode, pulse 8µs to 40µs resets fault without sleep mode."
      },
      {
        "number": "31",
        "name": "CAL",
        "type": "input",
        "description": "Amplifier calibration input; set to logic high to internally short amplifier inputs and perform automatic offset voltage calibration."
      },
      {
        "number": "32",
        "name": "AGND",
        "type": "power_in",
        "description": "Device analog ground; connect to system ground with AGND externally connected to PGND."
      },
      {
        "number": "33",
        "name": "DVDD",
        "type": "power_out",
        "description": "3.3V internal regulator output with 30mA capacity; connect X5R or X7R 1µF 6.3V ceramic capacitor between DVDD and AGND."
      },
      {
        "number": "34",
        "name": "INHA",
        "type": "input",
        "description": "High-side gate driver control input; in 6x PWM mode, controls high-side gate driver output state for phase A."
      },
      {
        "number": "35",
        "name": "INLA",
        "type": "input",
        "description": "Low-side gate driver control input; in 6x PWM mode, controls low-side gate driver output state for phase A."
      },
      {
        "number": "36",
        "name": "INHB",
        "type": "input",
        "description": "High-side gate driver control input; in 6x PWM mode, controls high-side gate driver output state for phase B."
      },
      {
        "number": "37",
        "name": "INLB",
        "type": "input",
        "description": "Low-side gate driver control input; in 6x PWM mode, controls low-side gate driver output state for phase B."
      },
      {
        "number": "38",
        "name": "INHC",
        "type": "input",
        "description": "High-side gate driver control input; in 6x PWM mode, controls high-side gate driver output state for phase C."
      },
      {
        "number": "39",
        "name": "INLC",
        "type": "input",
        "description": "Low-side gate driver control input; in 6x PWM mode, controls low-side gate driver output state for phase C."
      },
      {
        "number": "40",
        "name": "PGND",
        "type": "power_in",
        "description": "Device power ground and low-side MOSFET gate driver return path; connect to system ground with PGND externally connected to AGND."
      },
      {
        "number": "41",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: DRV8323HRTAT is marked as DRV8323H variant (hardware interface, no integrated buck regulator). The d",
          "exposed pad 41 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 57,
        "cost_usd": 0.5447,
        "at": "2026-10-03T05:52:18"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/drv8323",
        "pages": 95,
        "sha256": "98e62c0c61f99755",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 41,
        "described": 41,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "drv8323hrtat-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          6.0,
          1.0
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0e7f44d31306684df9103ee6c4c9053f806bc226e95ca02e9bbf4854bcebf55e",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "title": "DRV8323HRTAT",
  "brief": "Texas Instruments Motor Driver ICs, WQFN-40-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WQFN-40-EP(6x6)",
      "Category": "Power Supply Chip",
      "Pins": "41"
    }
  },
  "discovery_triggers": [
    "drv8323hrtat"
  ],
  "discovery_pitch": "DRV8323HRTAT (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "visibility": "public"
}