DRV10866DSCR

{
  "slug": "drv10866dscr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Motor Driver ICs, WSON-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "drv10866dscr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "drv10866dscr.kicad_sym",
    "drv10866dscr.kicad_mod",
    "drv10866dscr.glb",
    "drv10866dscr.step",
    "drv10866dscr.lbr",
    "docs/hero.png",
    "docs/drv10866dscr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "drv10866dscr-hero.glb",
    "drv10866dscr-hero.overlay.json",
    "drv10866dscr-etched.glb"
  ],
  "component": {
    "mpn": "DRV10866DSCR",
    "manufacturer": "Texas Instruments",
    "package": "WSON-10-EP(3x3)",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "Motor Driver ICs",
    "datasheet": "https://www.ti.com.cn/cn/lit/ds/symlink/drv10866.pdf?ts=1739430752808&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fsitesearch%252Fzh-cn%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Dzh-CN%2526nr%253D12%2526searchTerm%253DDRV10866DSCR",
    "parts": {
      "symbol": "drv10866dscr.kicad_sym",
      "footprint": "drv10866dscr.kicad_mod",
      "model_3d": "drv10866dscr-hero.glb",
      "model_3d_plain": "drv10866dscr-etched.glb",
      "model_3d_step": "drv10866dscr-etched.step",
      "model_3d_step_plain": "drv10866dscr.step",
      "lbr": "drv10866dscr.lbr"
    },
    "distributor_links": {
      "lcsc": "C701762",
      "digikey": "296-35696-2-ND",
      "mouser": "595-DRV10866DSCR"
    },
    "distributor_check": {
      "checked_at": "2026-10-21T00:53:06Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-35696-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-DRV10866DSCR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "FG",
        "type": "output",
        "description": "Open-drain frequency generator output that gives one electrical cycle per period when FGS is tied to GND, or half that frequency (1/2FG) when FGS is tied to VCC, and needs an external pullup when connected to a system."
      },
      {
        "number": "2",
        "name": "COM",
        "type": "input",
        "description": "Motor common terminal input, with recommended operating voltage range of -0.1 V to 5.5 V."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Input voltage for motor and chip supply, with recommended supply range of 1.65 V to 5.5 V, and an internal clamp that limits VCC during lock protection and standby."
      },
      {
        "number": "4",
        "name": "U",
        "type": "output",
        "description": "Phase U motor drive output, with recommended operating voltage range of -0.7 V to 6.5 V."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin, connected to the thermal pad."
      },
      {
        "number": "6",
        "name": "W",
        "type": "output",
        "description": "Phase W motor drive output, with recommended operating voltage range of -0.7 V to 6.5 V."
      },
      {
        "number": "7",
        "name": "V",
        "type": "power_in",
        "description": "Phase V motor drive output, with recommended operating voltage range of -0.7 V to 6.5 V."
      },
      {
        "number": "8",
        "name": "FGS",
        "type": "input",
        "description": "FG and 1/2FG select pin, latched upon wake-up from the PWM pin, with FGS tied to GND selecting FG and tied to VCC selecting 1/2FG, and a recommended range of -0.1 V to 5.5 V."
      },
      {
        "number": "9",
        "name": "CS",
        "type": "input",
        "description": "Overcurrent threshold setup pin where the overcurrent limit is I(mA) = 3120/RCS(kΩ) over the valid range 300 mA < ILIMIT < 850 mA, and shorting CS to ground disables overcurrent protection."
      },
      {
        "number": "10",
        "name": "PWM",
        "type": "input",
        "description": "PWM speed input for 15 kHz to 50 kHz, where the device enters low-power standby after PWM stays low for up to 500 µs and wakes on the rising edge."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed thermal pad connected to ground that must be soldered to the printed circuit board for optimal thermal and mechanical performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet pin table lists the thermal pad only as 'Thermal Pad (1)' with no number. The number 1; The datasheet pin table lists VCC as type 'I'. It is typed power_in here because it is the supply in; Pin descriptions were condensed to one sentence each. Limits are taken from the Pin Functions table "
        ],
        "pages_sent": 23,
        "cost_usd": 0.0781,
        "at": "2026-10-21T00:49:35"
      },
      "datasheet": {
        "url": "https://www.ti.com.cn/cn/lit/ds/symlink/drv10866.pdf?ts=1739430752808&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fsitesearch%252Fzh-cn%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Dzh-CN%2526nr%253D12%2526searchTerm%253DDRV10866DSCR",
        "pages": 23,
        "sha256": "43804f6ad09bbf95",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "drv10866dscr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          1.02
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1b436233b33ebba84da89538e97b0062d5b95e5ae0b484c46c569cb67274a3a5",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "drv10866dscr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          1.02
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b3f5c2a953d160a01205f849954911847ead2a7c180958b26df941b69ffc6b5f",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}