main
Ray Publish 0.1.1 309f197
{
  "slug": "drv104pwp",
  "version": "0.1.1",
  "type": "component",
  "description": "Texas Instruments Power Distribution Switches, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "drv104pwp",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "drv104pwp.kicad_sym",
    "drv104pwp.kicad_mod",
    "drv104pwp.glb",
    "drv104pwp.step",
    "drv104pwp.lbr",
    "docs/hero.png",
    "docs/drv104pwp-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "drv104pwp-etched.step",
    "drv104pwp-hero.glb",
    "drv104pwp-hero.overlay.json"
  ],
  "component": {
    "mpn": "DRV104PWP",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-14-EP",
    "pin_count": 15,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Distribution Switches",
    "datasheet": "https://www.ti.com/cn/lit/gpn/drv104",
    "parts": {
      "symbol": "drv104pwp.kicad_sym",
      "footprint": "drv104pwp.kicad_mod",
      "model_3d": "drv104pwp-hero.glb",
      "model_3d_plain": "drv104pwp.glb",
      "model_3d_step": "drv104pwp-etched.step",
      "model_3d_step_plain": "drv104pwp.step",
      "lbr": "drv104pwp.lbr"
    },
    "distributor_links": {
      "lcsc": "C1556572",
      "digikey": "296-26053-5-ND",
      "mouser": "595-DRV104PWP"
    },
    "distributor_check": {
      "checked_at": "2026-09-30T01:18:54Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-26053-5-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-DRV104PWP",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "Duty Cycle Adj",
        "type": "input",
        "description": "Analog input connected to comparator input and 2.75×IREF current source that linearly sets PWM duty cycle; active range 1.3V to 3.9V corresponds to 10% to 90% duty cycle."
      },
      {
        "number": "2",
        "name": "Delay Adj",
        "type": "input",
        "description": "Controls duration of initial 100% duty cycle before PWM mode through charge to 2.6V threshold comparator; internally driven by 15µA current source from VS; floating pin limits delay to 18µs minimum."
      },
      {
        "number": "3",
        "name": "Osc Freq Adj",
        "type": "input",
        "description": "External resistor to ground sets PWM oscillator frequency from 500Hz to 100kHz by controlling IREF current source; in slave mode sets current limit reset frequency."
      },
      {
        "number": "4",
        "name": "Master",
        "type": "input",
        "description": "Logic input that selects master mode (floating/high, pulls to 5V internally via 15µA source) making SYNC an output, or slave mode (low) making SYNC an input."
      },
      {
        "number": "5",
        "name": "BOOT",
        "type": "passive",
        "description": "Bootstrap capacitor connection node (>100pF, typically 470pF) between this pin and power output that supplies VGS charge to gate drive the high-side DMOS transistor."
      },
      {
        "number": "6",
        "name": "OUT1",
        "type": "output",
        "description": "High-side power output from DMOS source connected to VPS with low on-resistance (0.45Ω typical), saturation voltage 0.45V to 0.65V at 1A, current-limited to 1.2A typical."
      },
      {
        "number": "7",
        "name": "OUT2",
        "type": "output",
        "description": "High-side power output from DMOS source connected to VPS with low on-resistance (0.45Ω typical), saturation voltage 0.45V to 0.65V at 1A, current-limited to 1.2A typical."
      },
      {
        "number": "8",
        "name": "VPS1",
        "type": "power_in",
        "description": "Load power-supply connection to drain of power DMOS transistor; voltage may exceed VS by 5V maximum but must not exceed 37V practical limit or 40V absolute maximum."
      },
      {
        "number": "9",
        "name": "VPS2",
        "type": "power_in",
        "description": "Load power-supply connection to drain of power DMOS transistor; voltage may exceed VS by 5V maximum but must not exceed 37V practical limit or 40V absolute maximum."
      },
      {
        "number": "10",
        "name": "+VS",
        "type": "power_in",
        "description": "Logic and control circuit power supply with operating range 8V to 32V; quiescent current 0.6mA to 1mA at 24V nominal supply."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for all logic and control circuits; does not carry load current when power DMOS device is switched on."
      },
      {
        "number": "12",
        "name": "SYNC",
        "type": "bidirectional",
        "description": "Synchronization output in master mode (0V to 4.2V, 100µA source with 1kΩ output resistance) providing copy of power output state; input in slave mode with 2V switching threshold controlling power output."
      },
      {
        "number": "13",
        "name": "Status OK Flag",
        "type": "output",
        "description": "Open-drain active-low flag output that indicates over-temperature fault (junction ≥160°C) or over-current condition; requires pull-up resistor and sinks up to 10mA typical."
      },
      {
        "number": "14",
        "name": "Input",
        "type": "input",
        "description": "TTL-compatible logic input with 1.8V switching threshold; device enabled when driven above 2.2V, disabled below 1.2V; input current typically 1µA at all logic levels."
      },
      {
        "number": "15",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The HTSSOP-14-EP package includes an exposed thermal pad (EP) beneath the die which is not listed in",
          "exposed pad 15 added from the footprint"
        ],
        "pages_sent": 8,
        "cost_usd": 0.1222,
        "at": "2026-09-30T01:18:40"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/drv104",
        "pages": 25,
        "sha256": "e259add3a2ce23ae",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 15,
        "described": 15,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "drv104pwp.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.35,
          5.0,
          1.05
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e73930af88609deacee2bde98223bb9da2411f0cebb494015de765f0df216789",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "drv104pwp-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.35,
          5.0,
          1.05
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9b3c9ec800d1806d81bf58a32e3667f0881fb665b4906287633793cd53d42183",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "title": "DRV104PWP",
  "brief": "Texas Instruments Power Distribution Switches, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HTSSOP-14-EP",
      "Category": "Power Management (PMIC)",
      "Pins": "15"
    }
  },
  "discovery_triggers": [
    "drv104pwp"
  ],
  "discovery_pitch": "DRV104PWP (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "visibility": "public"
}