component

DP83TC811SWRNDRQ1

Public Made by Adom

by adom

Texas Instruments Ethernet Transceivers, UQFN-36-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentinterfacedp83tc811swrndrq1factory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 23h ago
viewers dp83tc811swrndrq1: viewers · Ray 23h ago
dp83tc811swrndrq1-etched.glb dp83tc811swrndrq1: factory component page (tier=lcsc) · Ray 23h ago
dp83tc811swrndrq1-etched.step dp83tc811swrndrq1: factory component page (tier=lcsc) · Ray 23h ago
dp83tc811swrndrq1-hero.glb dp83tc811swrndrq1: hero GLB from the etched model (keeps the MPN mark) · Ray 6h ago
dp83tc811swrndrq1-hero.overlay.json Publish 0.1.0 · Ray 23h ago
dp83tc811swrndrq1.glb Publish 0.1.0 · Ray 23h ago
dp83tc811swrndrq1.kicad_mod Publish 0.1.0 · Ray 23h ago
dp83tc811swrndrq1.kicad_sym Publish 0.1.0 · Ray 23h ago
dp83tc811swrndrq1.lbr Publish 0.1.0 · Ray 23h ago
dp83tc811swrndrq1.step Publish 0.1.0 · Ray 23h ago
package.json Publish 0.1.0 · Ray 23h ago
page.json Set visibility: public · Ray 23h ago
README.md Initial commit: component/dp83tc811swrndrq1 · Ray 23h ago

DP83TC811SWRNDRQ1

Texas Instruments · Ethernet Transceivers · UQFN-36-EP(6x6)

DP83TC811SWRNDRQ1 from Texas Instruments, in a UQFN-36-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MDC input Management Data Clock, synchronous to MDIO; maximum clock rate 25 MHz with no minimum clock rate, and may be asynchronous to the MAC clocks.
2 INT_N output Active-LOW interrupt output with a weak internal pullup, asserted LOW on an interrupt condition and cleared through register access; can be configured as active-HIGH via INT_TEST register.
3 RESET_N input Active-LOW reset input with internal pullup; asserting LOW for at least 1 µs forces a device reset, and all bootstrap pins are resampled on deassertion.
4 XO output Crystal-only reference clock output; leave floating when a CMOS-level oscillator drives XI.
5 XI input Reference clock input for a 25-MHz crystal or CMOS oscillator (MII/RGMII/SGMII), or 50-MHz oscillator in RMII Slave mode or 25-MHz in RMII Master mode; this is a fail-safe pin that prevents back-driving when the PHY is unpowered.
6 LED_1 / GPIO_1 bidirectional LED_1 indicates link status and blinks for TX/RX activity; the pin is also a strap pin that must only be set for bootstrap MODE 1 or MODE 4.
7 EN input Active-HIGH enable with internal pulldown; pulling it LOW disables the device and powers down all internal blocks, and it can be tied directly to VDDIO to enable the device.
8 WAKE input Active-HIGH input with internal pulldown that wakes the PHY from SLEEP; asserting it HIGH at power-up prevents the PHY from entering SLEEP, and it can be tied directly to VDDIO.
9 DNC unconnected Do not connect; leave floating.
10 INH output Active-HIGH output asserted HIGH when the PHY is in SLEEP or DISABLED and LOW in all other states.
11 VDDA power_in Core supply at 3.3 V; use 10-nF, 100-nF, 1-µF and 10-µF ceramic decoupling capacitors, with an optional ferrite bead.
12 TRD_P bidirectional Positive leg of the differential transmit/receive pair for 100BASE-T1 operation (IEEE 802.3bw compliant); rated for ±8-kV IEC61000-4-2 contact discharge per the ESD classification.
13 TRD_M bidirectional Negative leg of the differential transmit/receive pair for 100BASE-T1 operation (IEEE 802.3bw compliant); rated for ±8-kV IEC61000-4-2 contact discharge per the ESD classification.
14 RX_ER bidirectional Receive error output with internal pulldown in MII and RMII modes, asserted on a receive error symbol; unused in RGMII and SGMII modes and sampled as a bootstrap pin at reset.
15 RX_DV / CRS_DV / RX_CTRL bidirectional Receive data valid in MII, carrier sense/data valid in RMII, and RGMII receive control output with internal pulldown; sampled as a bootstrap pin at reset.
16 CLKOUT / GPIO_2 bidirectional Configurable I/O that outputs a 25-MHz reference clock as CLKOUT or serves as GPIO_2 through register configuration.
17 TCK input JTAG test clock with internal pullup, the primary clock for all test logic; may be left unconnected if not used.
18 TDO output JTAG test data output on which test results are scanned out; may be left unconnected if not used.
19 TMS input JTAG test mode select with internal pullup that sequences the 16-state Tap Controller; TI recommends three clock cycles with TMS HIGH to reset JTAG, and it may be left unconnected if not used.
20 TDI input JTAG test data input with internal pullup into which test data is scanned; may be left unconnected if not used.
21 DNC unconnected Do not connect; leave floating.
22 VDDIO power_in I/O supply configurable at 1.8 V, 2.5 V or 3.3 V; use 10-nF, 100-nF, 1-µF and 10-µF ceramic decoupling capacitors, with an optional ferrite bead.
23 RX_D3 / RX_M bidirectional RX_D3 is an MII/RGMII receive data bit (not used in RMII except as the 50-MHz RMII reference output in RMII Master mode), and RX_M is the negative SGMII differential data output; strap pin, must be strapped to MODE 1.
24 RX_D2 / RX_P bidirectional RX_D2 is an MII/RGMII receive data bit (not used in RMII), and RX_P is the positive SGMII differential data output synchronous to the SGMII clock; strap pin with internal pulldown.
25 RX_D1 / RXCLK_M bidirectional RX_D1 is a receive data bit used in MII, RGMII and RMII modes, and RXCLK_M is the negative SGMII 625-MHz differential clock output in 6-wire SGMII mode; strap pin with internal pulldown.
26 RX_D0 / RXCLK_P bidirectional RX_D0 is a receive data bit used in MII, RGMII and RMII modes, and RXCLK_P is the positive SGMII 625-MHz differential clock output in 6-wire SGMII mode; strap pin with internal pulldown.
27 RX_CLK output Receive clock providing a 25-MHz reference in MII and RGMII modes; unused in RMII and SGMII modes.
28 TX_CLK bidirectional In MII mode a 25-MHz output with constant phase to the reference clock; in RGMII mode a 25-MHz input from the MAC, with internal pulldown; unused in RMII and SGMII modes.
29 TX_EN / TX_CTRL input Transmit enable input with internal pulldown, presented before the rising edge of the transmit clock in MII and RMII, and a combined transmit control signal in RGMII; unused in SGMII mode.
30 TX_D3 input Transmit data bit with internal pulldown, received from the MAC before the rising edge of TX_CLK in MII and RGMII; not used in RMII mode.
31 TX_D2 input Transmit data bit with internal pulldown, received from the MAC before the rising edge of TX_CLK in MII and RGMII; not used in RMII mode.
32 TX_D1 / TX_P input Transmit data bit with internal pulldown used in MII, RGMII and RMII modes, and TX_P is the positive SGMII differential data input from the MAC.
33 TX_D0 / TX_M input Transmit data bit with internal pulldown used in MII, RGMII and RMII modes, and TX_M is the negative SGMII differential data input from the MAC.
34 TX_ER input Transmit error input with internal pulldown that indicates a transmit error symbol in MII mode, received before the rising edge of TX_CLK; unused in RMII, RGMII and SGMII modes.
35 LED_0 / GPIO_0 bidirectional LED_0 indicates link status and is also a strap pin with internal pulldown that must only be set for bootstrap MODE 1 or MODE 4.
36 MDIO bidirectional Open-drain management data input/output that requires a pullup resistor, recommended between 2.2 kΩ and 9 kΩ.
37 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package UQFN-36-EP(6x6)
Category Interface
Pins 37

CAD (KiCad official)

  • Symbol: DP83TC811SWRNDRQ1
  • Footprint: Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm
  • 3D model: UQFN-36-EP(6x6) (KiCad packages3D, STEP)
  • 3D model files: dp83tc811swrndrq1-etched.step / dp83tc811swrndrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); dp83tc811swrndrq1.step / dp83tc811swrndrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (136 pp, sha256 178301b957815077, retrieved 2026-10-08, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF