main
Ray Publish 0.1.1 a22c405
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651
{
  "schema_version": 1,
  "type": "component",
  "slug": "dp83849ivs",
  "title": "DP83849IVS",
  "brief": "Texas Instruments Ethernet Transceivers, TQFP-80(12x12). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "dp83849ivs",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "DP83849IVS",
    "manufacturer": "Texas Instruments",
    "package": "TQFP-80(12x12)",
    "pin_count": 80,
    "category": "Interface",
    "subcategory": "Ethernet Transceivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/dp83849i",
    "parts": {
      "symbol": "dp83849ivs.kicad_sym",
      "footprint": "dp83849ivs.kicad_mod",
      "model_3d": "dp83849ivs-hero.glb",
      "model_3d_plain": "dp83849ivs.glb",
      "model_3d_step": "dp83849ivs-etched.step",
      "model_3d_step_plain": "dp83849ivs.step",
      "lbr": "dp83849ivs.lbr"
    },
    "distributor_links": {
      "lcsc": "C1543897"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T06:32:07Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CRS_A/CRS_DV_A/LED_CFG_A",
        "type": "output",
        "description": "Carrier Sense or Carrier Sense/Receive Data Valid asserted high to indicate non-idle receive medium in MII/RMII/SNI modes; also used as LED Configuration strap option."
      },
      {
        "number": "2",
        "name": "RX_ER_A/MDIX_EN_A",
        "type": "output",
        "description": "Receive Error output asserted high to indicate invalid symbol detection in 100 Mb/s mode or False Carrier event in RMII mode; also used as MDIX Enable strap option."
      },
      {
        "number": "3",
        "name": "COL_A",
        "type": "output",
        "description": "Collision Detect output asserted high to indicate simultaneous transmit and receive activity in half duplex modes or heartbeat in 10BASE-T half duplex mode."
      },
      {
        "number": "4",
        "name": "RXD0_A/PHYAD1",
        "type": "output",
        "description": "Receive Data bit 0 driven synchronously to RX_CLK with valid data when RX_DV or CRS is asserted; also used as PHY Address bit 1 strap during reset."
      },
      {
        "number": "5",
        "name": "RXD1_A/PHYAD2",
        "type": "output",
        "description": "Receive Data bit 1 driven synchronously to RX_CLK with valid data when RX_DV or CRS is asserted; also used as PHY Address bit 2 strap during reset."
      },
      {
        "number": "6",
        "name": "COREGND1",
        "type": "power_in",
        "description": "Core Ground connection for Port A."
      },
      {
        "number": "7",
        "name": "PFBIN1",
        "type": "input",
        "description": "Power Feedback Input connection requiring 0.1 µF capacitor placed close to the pin; fed with power from PFBOUT pin only."
      },
      {
        "number": "8",
        "name": "RXD2_A/CLK2MAC_DIS",
        "type": "output",
        "description": "Receive Data bit 2 in MII mode driven synchronously to RX_CLK; also used as CLK2MAC disable strap option."
      },
      {
        "number": "9",
        "name": "RXD3_A/ED_EN_A",
        "type": "output",
        "description": "Receive Data bit 3 in MII mode driven synchronously to RX_CLK; also used as Energy Detect enable strap option."
      },
      {
        "number": "10",
        "name": "IOGND1",
        "type": "power_in",
        "description": "I/O Ground connection."
      },
      {
        "number": "11",
        "name": "IOVDD1",
        "type": "power_in",
        "description": "I/O 3.3-V Supply connection."
      },
      {
        "number": "12",
        "name": "TX_CLK_A",
        "type": "output",
        "description": "MII Transmit Clock output providing 25 MHz for 100 Mb/s mode or 2.5 MHz for 10 Mb/s mode; 10 MHz for 10 Mb/s SNI mode."
      },
      {
        "number": "13",
        "name": "TX_EN_A",
        "type": "input",
        "description": "MII/RMII Transmit Enable active high input indicating presence of valid data on TXD[3:0] in MII mode or TXD[1:0] in RMII mode."
      },
      {
        "number": "14",
        "name": "TXD0_A",
        "type": "input",
        "description": "Transmit Data bit 0 input accepting data synchronous to TX_CLK in MII/RMII/SNI modes."
      },
      {
        "number": "15",
        "name": "TXD1_A",
        "type": "input",
        "description": "Transmit Data bit 1 input accepting data synchronous to TX_CLK in MII/RMII/SNI modes."
      },
      {
        "number": "16",
        "name": "TXD2_A",
        "type": "input",
        "description": "Transmit Data bit 2 input accepting data synchronous to TX_CLK in MII/RMII modes."
      },
      {
        "number": "17",
        "name": "TXD3_A/SNI_MODE_A",
        "type": "input",
        "description": "Transmit Data bit 3 input in MII mode; also used as SNI Mode strap option for MAC Data Interface configuration."
      },
      {
        "number": "18",
        "name": "PWRDOWN_INT_A",
        "type": "input",
        "description": "Power Down active low input for Port A; can be configured as open drain Interrupt output when INT_OE bit is set in MICR register."
      },
      {
        "number": "19",
        "name": "LED_LINK_A/AN0_A",
        "type": "bidirectional",
        "description": "Link Status LED output indicating link status in Mode 1 or Link/Activity LED in Mode 2/3; also used as AN0 auto-negotiation strap pin."
      },
      {
        "number": "20",
        "name": "LED_SPEED_A/AN1_A",
        "type": "bidirectional",
        "description": "Speed LED output which is ON at 100 Mb/s and OFF at 10 Mb/s; also used as AN1 auto-negotiation strap pin."
      },
      {
        "number": "21",
        "name": "LED_ACT/LED_COL/AN_EN_A",
        "type": "bidirectional",
        "description": "Activity LED in Mode 1 or Collision/Duplex LED in Mode 2/3; also used as Auto-Negotiation Enable strap pin."
      },
      {
        "number": "22",
        "name": "ANAGND1",
        "type": "power_in",
        "description": "Analog Ground connection."
      },
      {
        "number": "23",
        "name": "TPRDM_A",
        "type": "bidirectional",
        "description": "10BASE-T or 100BASE-TX differential receive data minus input/output pair with 3.3-V bias requirement for Port A."
      },
      {
        "number": "24",
        "name": "TPRDP_A",
        "type": "bidirectional",
        "description": "10BASE-T or 100BASE-TX differential receive data plus input/output pair with 3.3-V bias requirement for Port A."
      },
      {
        "number": "25",
        "name": "CDGND1",
        "type": "power_in",
        "description": "CD Ground connection for Port A."
      },
      {
        "number": "26",
        "name": "TPTDM_A",
        "type": "bidirectional",
        "description": "10BASE-T or 100BASE-TX differential transmit data minus input/output pair with 3.3-V bias requirement for Port A."
      },
      {
        "number": "27",
        "name": "TPTDP_A",
        "type": "bidirectional",
        "description": "10BASE-T or 100BASE-TX differential transmit data plus input/output pair with 3.3-V bias requirement for Port A."
      },
      {
        "number": "28",
        "name": "PFBIN2",
        "type": "input",
        "description": "Power Feedback Input connection requiring 0.1 µF capacitor placed close to the pin; fed with power from PFBOUT pin only."
      },
      {
        "number": "29",
        "name": "ANAGND2",
        "type": "power_in",
        "description": "Analog Ground connection."
      },
      {
        "number": "30",
        "name": "ANA33VDD",
        "type": "power_in",
        "description": "Analog 3.3-V Supply connection."
      },
      {
        "number": "31",
        "name": "PFBOUT",
        "type": "power_out",
        "description": "Power Feedback Output providing power to PFBIN1-4 pins; requires 10 µF and 0.1 µF parallel capacitors placed close to the pin."
      },
      {
        "number": "32",
        "name": "RBIAS",
        "type": "passive",
        "description": "Bias Resistor Connection requiring 4-87 kΩ 1% resistor to be connected from this pin to GND."
      },
      {
        "number": "33",
        "name": "ANAGND3",
        "type": "power_in",
        "description": "Analog Ground connection."
      },
      {
        "number": "34",
        "name": "PFBIN3",
        "type": "input",
        "description": "Power Feedback Input connection requiring 0.1 µF capacitor placed close to the pin; fed with power from PFBOUT pin only."
      },
      {
        "number": "35",
        "name": "TPTDP_B",
        "type": "bidirectional",
        "description": "10BASE-T or 100BASE-TX differential transmit data plus input/output pair with 3.3-V bias requirement for Port B."
      },
      {
        "number": "36",
        "name": "TPTDM_B",
        "type": "bidirectional",
        "description": "10BASE-T or 100BASE-TX differential transmit data minus input/output pair with 3.3-V bias requirement for Port B."
      },
      {
        "number": "37",
        "name": "CDGND2",
        "type": "power_in",
        "description": "CD Ground connection for Port B."
      },
      {
        "number": "38",
        "name": "TPRDP_B",
        "type": "bidirectional",
        "description": "10BASE-T or 100BASE-TX differential receive data plus input/output pair with 3.3-V bias requirement for Port B."
      },
      {
        "number": "39",
        "name": "TPRDM_B",
        "type": "bidirectional",
        "description": "10BASE-T or 100BASE-TX differential receive data minus input/output pair with 3.3-V bias requirement for Port B."
      },
      {
        "number": "40",
        "name": "ANAGND4",
        "type": "power_in",
        "description": "Analog Ground connection."
      },
      {
        "number": "41",
        "name": "LED_ACT/LED_COL/AN_EN_B",
        "type": "bidirectional",
        "description": "Activity LED in Mode 1 or Collision/Duplex LED in Mode 2/3 for Port B; also used as Auto-Negotiation Enable strap pin."
      },
      {
        "number": "42",
        "name": "LED_SPEED_B/AN1_B",
        "type": "bidirectional",
        "description": "Speed LED output for Port B which is ON at 100 Mb/s and OFF at 10 Mb/s; also used as AN1 auto-negotiation strap pin."
      },
      {
        "number": "43",
        "name": "LED_LINK_B/AN0_B",
        "type": "bidirectional",
        "description": "Link Status LED output for Port B indicating link status in Mode 1 or Link/Activity LED in Mode 2/3; also used as AN0 strap pin."
      },
      {
        "number": "44",
        "name": "PWRDOWN_INT_B",
        "type": "input",
        "description": "Power Down active low input for Port B; can be configured as open drain Interrupt output when INT_OE bit is set in MICR register."
      },
      {
        "number": "45",
        "name": "TXD3_B/SNI_MODE_B",
        "type": "input",
        "description": "Transmit Data bit 3 input for Port B in MII mode; also used as SNI Mode strap option for MAC Data Interface configuration."
      },
      {
        "number": "46",
        "name": "TXD2_B",
        "type": "input",
        "description": "Transmit Data bit 2 input for Port B in MII mode."
      },
      {
        "number": "47",
        "name": "TXD1_B",
        "type": "input",
        "description": "Transmit Data bit 1 input for Port B accepting data synchronous to TX_CLK in MII/RMII/SNI modes."
      },
      {
        "number": "48",
        "name": "TXD0_B",
        "type": "input",
        "description": "Transmit Data bit 0 input for Port B accepting data synchronous to TX_CLK in MII/RMII/SNI modes."
      },
      {
        "number": "49",
        "name": "TX_EN_B",
        "type": "input",
        "description": "Transmit Enable active high input for Port B indicating presence of valid data on TXD[3:0] in MII mode or TXD[1:0] in RMII mode."
      },
      {
        "number": "50",
        "name": "TX_CLK_B",
        "type": "output",
        "description": "MII Transmit Clock output for Port B providing 25 MHz for 100 Mb/s mode or 2.5 MHz for 10 Mb/s mode; 10 MHz for 10 Mb/s SNI mode."
      },
      {
        "number": "51",
        "name": "IOVDD2",
        "type": "power_in",
        "description": "I/O 3.3-V Supply connection."
      },
      {
        "number": "52",
        "name": "IOGND2",
        "type": "power_in",
        "description": "I/O Ground connection."
      },
      {
        "number": "53",
        "name": "RXD3_B/ED_EN_B",
        "type": "output",
        "description": "Receive Data bit 3 output for Port B in MII mode; also used as Energy Detect enable strap option."
      },
      {
        "number": "54",
        "name": "PFBIN4",
        "type": "input",
        "description": "Power Feedback Input connection requiring 0.1 µF capacitor placed close to the pin; fed with power from PFBOUT pin only."
      },
      {
        "number": "55",
        "name": "COREGND2",
        "type": "power_in",
        "description": "Core Ground connection for Port B."
      },
      {
        "number": "56",
        "name": "RXD2_B/EXTENDER_EN",
        "type": "output",
        "description": "Receive Data bit 2 output for Port B in MII mode; also used as Extender Mode enable strap option."
      },
      {
        "number": "57",
        "name": "RXD1_B/PHYAD4",
        "type": "output",
        "description": "Receive Data bit 1 output for Port B driven synchronously to RX_CLK; also used as PHY Address bit 4 strap during reset."
      },
      {
        "number": "58",
        "name": "RXD0_B/PHYAD3",
        "type": "output",
        "description": "Receive Data bit 0 output for Port B driven synchronously to RX_CLK; also used as PHY Address bit 3 strap during reset."
      },
      {
        "number": "59",
        "name": "COL_B",
        "type": "output",
        "description": "Collision Detect output for Port B asserted high to indicate simultaneous transmit and receive activity in half duplex modes."
      },
      {
        "number": "60",
        "name": "RX_ER_B/MDIX_EN_B",
        "type": "output",
        "description": "Receive Error output for Port B asserted high to indicate invalid symbol detection or False Carrier event; also used as MDIX Enable strap option."
      },
      {
        "number": "61",
        "name": "CRS_B/CRS_DV_B/LED_CFG_B",
        "type": "output",
        "description": "Carrier Sense or Carrier Sense/Receive Data Valid for Port B asserted high to indicate non-idle receive medium in MII/SNI modes; also used as LED Configuration strap option."
      },
      {
        "number": "62",
        "name": "RX_DV_B/MII_MODE_B",
        "type": "output",
        "description": "Receive Data Valid output for Port B asserted high when valid data is present on RXD[1:0] in RMII mode; also used as MII Mode strap option."
      },
      {
        "number": "63",
        "name": "RX_CLK_B",
        "type": "output",
        "description": "Receive Clock output for Port B providing 25 MHz for 100 Mb/s mode or 2.5 MHz for 10 Mb/s mode in MII/SNI operation."
      },
      {
        "number": "64",
        "name": "IOGND3",
        "type": "power_in",
        "description": "I/O Ground connection."
      },
      {
        "number": "65",
        "name": "IOVDD3",
        "type": "power_in",
        "description": "I/O 3.3-V Supply connection."
      },
      {
        "number": "66",
        "name": "MDIO",
        "type": "bidirectional",
        "description": "Management Data I/O bi-directional serial interface signal sourced by station management entity or PHY; requires 1.5-kΩ pullup resistor."
      },
      {
        "number": "67",
        "name": "MDC",
        "type": "input",
        "description": "Management Data Clock synchronous clock to MDIO interface with maximum clock rate of 25 MHz and no minimum clock rate."
      },
      {
        "number": "68",
        "name": "CLK2MAC",
        "type": "output",
        "description": "Clock to MAC output providing 25 MHz in MII mode or 50 MHz in RMII mode; can be disabled via CLK2MAC_DIS strap option."
      },
      {
        "number": "69",
        "name": "X2",
        "type": "output",
        "description": "Crystal Oscillator Output connection for external 25 MHz crystal resonator device; must be left unconnected if external CMOS oscillator is used."
      },
      {
        "number": "70",
        "name": "X1",
        "type": "input",
        "description": "Crystal/Oscillator Input primary clock reference for 25 MHz 0.005% (+50 ppm) clock source or 50 MHz CMOS-level oscillator in RMII mode."
      },
      {
        "number": "71",
        "name": "RESET_N",
        "type": "input",
        "description": "Reset active low input; asserting low for at least 1 µs forces reset process to occur and re-initializes all registers and strap options."
      },
      {
        "number": "72",
        "name": "TCK",
        "type": "input",
        "description": "Test Clock input for JTAG interface with weak internal pullup."
      },
      {
        "number": "73",
        "name": "TDO",
        "type": "output",
        "description": "Test Data Output for JTAG interface."
      },
      {
        "number": "74",
        "name": "TMS",
        "type": "input",
        "description": "Test Mode Select input for JTAG interface with weak internal pullup."
      },
      {
        "number": "75",
        "name": "TRSTN",
        "type": "input",
        "description": "Test Reset active low input for JTAG interface with weak internal pullup."
      },
      {
        "number": "76",
        "name": "TDI",
        "type": "input",
        "description": "Test Data Input for JTAG interface with weak internal pullup."
      },
      {
        "number": "77",
        "name": "IOGND4",
        "type": "power_in",
        "description": "I/O Ground connection."
      },
      {
        "number": "78",
        "name": "IOVDD4",
        "type": "power_in",
        "description": "I/O 3.3-V Supply connection."
      },
      {
        "number": "79",
        "name": "RX_CLK_A",
        "type": "output",
        "description": "MII Receive Clock output for Port A providing 25 MHz for 100 Mb/s mode or 2.5 MHz for 10 Mb/s mode in MII/SNI operation."
      },
      {
        "number": "80",
        "name": "RX_DV_A/MII_MODE_A",
        "type": "output",
        "description": "Receive Data Valid output for Port A asserted high when valid data is present on RXD[1:0] in RMII mode; also used as MII Mode strap option."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 22,
        "cost_usd": 0.2597,
        "at": "2026-10-01T06:31:38"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/dp83849i",
        "pages": 106,
        "sha256": "cda2b378740678e3",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 80,
        "described": 80,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "dp83849ivs.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          14,
          14,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "77f4de0ca0c787b8b4416c735fddfcecf5cf4cea0ca3550f96f5c47c8664594c",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "dp83849ivs-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          14,
          14,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "a461bbfb845fc7b6f0e3b976747fd1a91e90663150da1779c926d1817d5b99bd",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TQFP-80(12x12)",
      "Category": "Interface",
      "Pins": "80"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "dp83849ivs"
  ],
  "discovery_pitch": "DP83849IVS (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "dp83849ivs.kicad_sym",
    "dp83849ivs.kicad_mod",
    "dp83849ivs.glb",
    "dp83849ivs.step",
    "dp83849ivs.lbr",
    "docs/hero.png",
    "docs/dp83849ivs-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "dp83849ivs-etched.step",
    "dp83849ivs-hero.glb",
    "dp83849ivs-hero.overlay.json"
  ],
  "visibility": "public",
  "description": "Texas Instruments Ethernet Transceivers, TQFP-80(12x12). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}