main
Ray
Publish 0.1.1
798f81c
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375
{
"schema_version": 1,
"type": "component",
"slug": "dp83826erhbt",
"title": "DP83826ERHBT",
"brief": "Texas Instruments Ethernet Transceivers, VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.1",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"interface",
"dp83826erhbt",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "DP83826ERHBT",
"manufacturer": "Texas Instruments",
"package": "VQFN-32-EP(5x5)",
"pin_count": 33,
"category": "Interface",
"subcategory": "Ethernet Transceivers",
"datasheet": "https://www.ti.com/cn/lit/gpn/dp83826e",
"parts": {
"symbol": "dp83826erhbt.kicad_sym",
"footprint": "dp83826erhbt.kicad_mod",
"model_3d": "dp83826erhbt-hero.glb",
"model_3d_plain": "dp83826erhbt.glb",
"model_3d_step": "dp83826erhbt-etched.step",
"model_3d_step_plain": "dp83826erhbt.step",
"lbr": "dp83826erhbt.lbr"
},
"distributor_links": {
"lcsc": "C1855771",
"digikey": "296-DP83826ERHBTTR-ND",
"mouser": "595-DP83826ERHBT"
},
"distributor_check": {
"checked_at": "2026-10-01T06:33:06Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-DP83826ERHBTTR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-DP83826ERHBT",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "ModeSelect",
"type": "input",
"description": "Mode selection input with internal pull-up; leave NC or pull to VDDIO for Enhanced Mode, short to GND for Basic Mode."
},
{
"number": "2",
"name": "CEXT",
"type": "passive",
"description": "External capacitor node for clock stabilization; connect via 2nF capacitor to GND."
},
{
"number": "3",
"name": "VDDA3V3",
"type": "power_in",
"description": "Analog power supply input; 3.3V with appropriate decoupling capacitors per power section."
},
{
"number": "4",
"name": "RD_M",
"type": "input",
"description": "Differential receive input minus; auto-configured for 10BASE-Te or 100BASE-TX according to IEEE 802.3."
},
{
"number": "5",
"name": "RD_P",
"type": "input",
"description": "Differential receive input plus; auto-configured for 10BASE-Te or 100BASE-TX according to IEEE 802.3."
},
{
"number": "6",
"name": "TD_M",
"type": "output",
"description": "Differential transmit output minus; configured as 10BASE-Te or 100BASE-TX per strap configuration."
},
{
"number": "7",
"name": "TD_P",
"type": "output",
"description": "Differential transmit output plus; configured as 10BASE-Te or 100BASE-TX per strap configuration."
},
{
"number": "8",
"name": "XO",
"type": "output",
"description": "Crystal oscillator output; leave floating when using CMOS-level oscillator on XI pin."
},
{
"number": "9",
"name": "XI/50MHzIn",
"type": "input",
"description": "Crystal or oscillator input; accepts 25MHz ±50ppm crystal (MII/RMII leader) or 50MHz ±50ppm CMOS oscillator (RMII follower)."
},
{
"number": "10",
"name": "RBIAS",
"type": "passive",
"description": "Bias resistor node; connect 6.49kΩ ±1% resistor to ground."
},
{
"number": "11",
"name": "MDIO",
"type": "bidirectional",
"description": "Bidirectional management data I/O for SMI protocol; has 10kΩ internal pull-up requiring external pull-up resistor."
},
{
"number": "12",
"name": "MDC",
"type": "input",
"description": "Management data clock input; synchronizes MDIO transactions at maximum 25MHz with no minimum frequency."
},
{
"number": "13",
"name": "RX_D3",
"type": "output",
"description": "Receive data output bit 3; valid when RX_DV asserted, synchronized with RX_CLK rising edge."
},
{
"number": "14",
"name": "RX_D2",
"type": "output",
"description": "Receive data output bit 2; valid when RX_DV asserted, synchronized with RX_CLK rising edge."
},
{
"number": "15",
"name": "RX_D1",
"type": "output",
"description": "Receive data output bit 1; valid when RX_DV asserted, synchronized with RX_CLK rising edge."
},
{
"number": "16",
"name": "RX_D0",
"type": "output",
"description": "Receive data output bit 0; valid when RX_DV asserted, synchronized with RX_CLK rising edge."
},
{
"number": "17",
"name": "VDDIO",
"type": "power_in",
"description": "I/O power supply; accepts 3.3V ±0.3V or 1.8V ±0.18V with appropriate decoupling capacitors."
},
{
"number": "18",
"name": "RX_DV/CRS_DV",
"type": "output",
"description": "Receive data valid output in MII mode or combined carrier sense in RMII mode; active high indicating valid data on RX_D."
},
{
"number": "19",
"name": "RX_CLK/50MHz_RMII",
"type": "output",
"description": "Receive clock output; provides 25MHz (100Mbps) or 2.5MHz (10Mbps) in MII mode; 50MHz in RMII leader mode."
},
{
"number": "20",
"name": "RX_ER",
"type": "output",
"description": "Receive error output; indicates detection of error symbols in received packets, synchronized with RX_CLK rising edge."
},
{
"number": "21",
"name": "PWRDN/INT",
"type": "bidirectional",
"description": "Power down input or interrupt output; defaults to power down function with low active signal, configurable to interrupt via register."
},
{
"number": "22",
"name": "TX_CLK",
"type": "output",
"description": "Transmit clock output; provides 25MHz (100Mbps) or 2.5MHz (10Mbps) in MII mode with constant phase relative to XI."
},
{
"number": "23",
"name": "TX_EN",
"type": "input",
"description": "Transmit enable input; synchronized with TX_CLK rising edge, indicates valid data on TX_D[3:0] (MII) or TX_D[1:0] (RMII)."
},
{
"number": "24",
"name": "TX_D0",
"type": "input",
"description": "Transmit data input bit 0; synchronized with TX_CLK rising edge in MII or reference clock rising edge in RMII."
},
{
"number": "25",
"name": "TX_D1",
"type": "input",
"description": "Transmit data input bit 1; synchronized with TX_CLK rising edge in MII or reference clock rising edge in RMII."
},
{
"number": "26",
"name": "TX_D2",
"type": "input",
"description": "Transmit data input bit 2; synchronized with TX_CLK rising edge in MII or reference clock rising edge in RMII."
},
{
"number": "27",
"name": "TX_D3",
"type": "input",
"description": "Transmit data input bit 3; synchronized with TX_CLK rising edge in MII or reference clock rising edge in RMII."
},
{
"number": "28",
"name": "COL/LED2/TX_ER/GPIO",
"type": "output",
"description": "Collision detection output in MII (low in full-duplex, high when both TX and RX active in half-duplex); configurable as LED2/TX_ER/GPIO via register."
},
{
"number": "29",
"name": "CRS/LED3",
"type": "output",
"description": "Carrier sense output in MII (high when medium active); configurable as LED3 via register."
},
{
"number": "30",
"name": "LED0",
"type": "output",
"description": "Link status LED output; indicates link status with optional transmit/receive activity blink per register and strap configuration."
},
{
"number": "31",
"name": "CLKOUT/LED1",
"type": "output",
"description": "Clock output (Enhanced Mode default); outputs 25MHz reference from XI at power-up, configurable as LED1 via strap, disabled only in deep power down."
},
{
"number": "32",
"name": "RST_N",
"type": "input",
"description": "Active-low reset input with internal pull-up; minimum 25µs pulse triggers device reset and strap re-scan with internal register reset."
},
{
"number": "33",
"name": "GND",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Thermal pad (exposed pad on bottom of package) must connect to GND but is not numbered in standard p; Enhanced Mode vs Basic Mode function differences: Pin 21 is PWRDN/INT in Enhanced Mode but INT only ; External passive components required per datasheet: 2nF capacitor must connect CEXT pin to GND; 6.49",
"exposed pad 33 added from the footprint"
],
"pages_sent": 73,
"cost_usd": 0.528,
"at": "2026-10-01T06:32:49"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/dp83826e",
"pages": 115,
"sha256": "0ddec6391c36bec1",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 33,
"described": 33,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "dp83826erhbt.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5,
5,
0.875
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "dp83826erhbt-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5,
5,
0.875
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "11656878c40cd619999e5510502e86ff4cc85c7c1be6263c0a8ff916ec5d8a65",
"checked": "2026-11-16",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "VQFN-32-EP(5x5)",
"Category": "Interface",
"Pins": "33"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"dp83826erhbt"
],
"discovery_pitch": "DP83826ERHBT (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"dp83826erhbt.kicad_sym",
"dp83826erhbt.kicad_mod",
"dp83826erhbt.glb",
"dp83826erhbt.step",
"dp83826erhbt.lbr",
"docs/hero.png",
"docs/dp83826erhbt-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"dp83826erhbt-etched.step",
"dp83826erhbt-hero.glb",
"dp83826erhbt-hero.overlay.json"
],
"visibility": "public",
"description": "Texas Instruments Ethernet Transceivers, VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"org": "adom"
}