main
Ray Publish 0.1.1 798f81c
{
  "slug": "dp83826erhbt",
  "version": "0.1.1",
  "type": "component",
  "description": "Texas Instruments Ethernet Transceivers, VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "dp83826erhbt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "dp83826erhbt.kicad_sym",
    "dp83826erhbt.kicad_mod",
    "dp83826erhbt.glb",
    "dp83826erhbt.step",
    "dp83826erhbt.lbr",
    "docs/hero.png",
    "docs/dp83826erhbt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "dp83826erhbt-etched.step",
    "dp83826erhbt-hero.glb",
    "dp83826erhbt-hero.overlay.json"
  ],
  "component": {
    "mpn": "DP83826ERHBT",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "Interface",
    "subcategory": "Ethernet Transceivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/dp83826e",
    "parts": {
      "symbol": "dp83826erhbt.kicad_sym",
      "footprint": "dp83826erhbt.kicad_mod",
      "model_3d": "dp83826erhbt-hero.glb",
      "model_3d_plain": "dp83826erhbt.glb",
      "model_3d_step": "dp83826erhbt-etched.step",
      "model_3d_step_plain": "dp83826erhbt.step",
      "lbr": "dp83826erhbt.lbr"
    },
    "distributor_links": {
      "lcsc": "C1855771",
      "digikey": "296-DP83826ERHBTTR-ND",
      "mouser": "595-DP83826ERHBT"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T06:33:06Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-DP83826ERHBTTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-DP83826ERHBT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ModeSelect",
        "type": "input",
        "description": "Mode selection input with internal pull-up; leave NC or pull to VDDIO for Enhanced Mode, short to GND for Basic Mode."
      },
      {
        "number": "2",
        "name": "CEXT",
        "type": "passive",
        "description": "External capacitor node for clock stabilization; connect via 2nF capacitor to GND."
      },
      {
        "number": "3",
        "name": "VDDA3V3",
        "type": "power_in",
        "description": "Analog power supply input; 3.3V with appropriate decoupling capacitors per power section."
      },
      {
        "number": "4",
        "name": "RD_M",
        "type": "input",
        "description": "Differential receive input minus; auto-configured for 10BASE-Te or 100BASE-TX according to IEEE 802.3."
      },
      {
        "number": "5",
        "name": "RD_P",
        "type": "input",
        "description": "Differential receive input plus; auto-configured for 10BASE-Te or 100BASE-TX according to IEEE 802.3."
      },
      {
        "number": "6",
        "name": "TD_M",
        "type": "output",
        "description": "Differential transmit output minus; configured as 10BASE-Te or 100BASE-TX per strap configuration."
      },
      {
        "number": "7",
        "name": "TD_P",
        "type": "output",
        "description": "Differential transmit output plus; configured as 10BASE-Te or 100BASE-TX per strap configuration."
      },
      {
        "number": "8",
        "name": "XO",
        "type": "output",
        "description": "Crystal oscillator output; leave floating when using CMOS-level oscillator on XI pin."
      },
      {
        "number": "9",
        "name": "XI/50MHzIn",
        "type": "input",
        "description": "Crystal or oscillator input; accepts 25MHz ±50ppm crystal (MII/RMII leader) or 50MHz ±50ppm CMOS oscillator (RMII follower)."
      },
      {
        "number": "10",
        "name": "RBIAS",
        "type": "passive",
        "description": "Bias resistor node; connect 6.49kΩ ±1% resistor to ground."
      },
      {
        "number": "11",
        "name": "MDIO",
        "type": "bidirectional",
        "description": "Bidirectional management data I/O for SMI protocol; has 10kΩ internal pull-up requiring external pull-up resistor."
      },
      {
        "number": "12",
        "name": "MDC",
        "type": "input",
        "description": "Management data clock input; synchronizes MDIO transactions at maximum 25MHz with no minimum frequency."
      },
      {
        "number": "13",
        "name": "RX_D3",
        "type": "output",
        "description": "Receive data output bit 3; valid when RX_DV asserted, synchronized with RX_CLK rising edge."
      },
      {
        "number": "14",
        "name": "RX_D2",
        "type": "output",
        "description": "Receive data output bit 2; valid when RX_DV asserted, synchronized with RX_CLK rising edge."
      },
      {
        "number": "15",
        "name": "RX_D1",
        "type": "output",
        "description": "Receive data output bit 1; valid when RX_DV asserted, synchronized with RX_CLK rising edge."
      },
      {
        "number": "16",
        "name": "RX_D0",
        "type": "output",
        "description": "Receive data output bit 0; valid when RX_DV asserted, synchronized with RX_CLK rising edge."
      },
      {
        "number": "17",
        "name": "VDDIO",
        "type": "power_in",
        "description": "I/O power supply; accepts 3.3V ±0.3V or 1.8V ±0.18V with appropriate decoupling capacitors."
      },
      {
        "number": "18",
        "name": "RX_DV/CRS_DV",
        "type": "output",
        "description": "Receive data valid output in MII mode or combined carrier sense in RMII mode; active high indicating valid data on RX_D."
      },
      {
        "number": "19",
        "name": "RX_CLK/50MHz_RMII",
        "type": "output",
        "description": "Receive clock output; provides 25MHz (100Mbps) or 2.5MHz (10Mbps) in MII mode; 50MHz in RMII leader mode."
      },
      {
        "number": "20",
        "name": "RX_ER",
        "type": "output",
        "description": "Receive error output; indicates detection of error symbols in received packets, synchronized with RX_CLK rising edge."
      },
      {
        "number": "21",
        "name": "PWRDN/INT",
        "type": "bidirectional",
        "description": "Power down input or interrupt output; defaults to power down function with low active signal, configurable to interrupt via register."
      },
      {
        "number": "22",
        "name": "TX_CLK",
        "type": "output",
        "description": "Transmit clock output; provides 25MHz (100Mbps) or 2.5MHz (10Mbps) in MII mode with constant phase relative to XI."
      },
      {
        "number": "23",
        "name": "TX_EN",
        "type": "input",
        "description": "Transmit enable input; synchronized with TX_CLK rising edge, indicates valid data on TX_D[3:0] (MII) or TX_D[1:0] (RMII)."
      },
      {
        "number": "24",
        "name": "TX_D0",
        "type": "input",
        "description": "Transmit data input bit 0; synchronized with TX_CLK rising edge in MII or reference clock rising edge in RMII."
      },
      {
        "number": "25",
        "name": "TX_D1",
        "type": "input",
        "description": "Transmit data input bit 1; synchronized with TX_CLK rising edge in MII or reference clock rising edge in RMII."
      },
      {
        "number": "26",
        "name": "TX_D2",
        "type": "input",
        "description": "Transmit data input bit 2; synchronized with TX_CLK rising edge in MII or reference clock rising edge in RMII."
      },
      {
        "number": "27",
        "name": "TX_D3",
        "type": "input",
        "description": "Transmit data input bit 3; synchronized with TX_CLK rising edge in MII or reference clock rising edge in RMII."
      },
      {
        "number": "28",
        "name": "COL/LED2/TX_ER/GPIO",
        "type": "output",
        "description": "Collision detection output in MII (low in full-duplex, high when both TX and RX active in half-duplex); configurable as LED2/TX_ER/GPIO via register."
      },
      {
        "number": "29",
        "name": "CRS/LED3",
        "type": "output",
        "description": "Carrier sense output in MII (high when medium active); configurable as LED3 via register."
      },
      {
        "number": "30",
        "name": "LED0",
        "type": "output",
        "description": "Link status LED output; indicates link status with optional transmit/receive activity blink per register and strap configuration."
      },
      {
        "number": "31",
        "name": "CLKOUT/LED1",
        "type": "output",
        "description": "Clock output (Enhanced Mode default); outputs 25MHz reference from XI at power-up, configurable as LED1 via strap, disabled only in deep power down."
      },
      {
        "number": "32",
        "name": "RST_N",
        "type": "input",
        "description": "Active-low reset input with internal pull-up; minimum 25µs pulse triggers device reset and strap re-scan with internal register reset."
      },
      {
        "number": "33",
        "name": "GND",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Thermal pad (exposed pad on bottom of package) must connect to GND but is not numbered in standard p; Enhanced Mode vs Basic Mode function differences: Pin 21 is PWRDN/INT in Enhanced Mode but INT only ; External passive components required per datasheet: 2nF capacitor must connect CEXT pin to GND; 6.49",
          "exposed pad 33 added from the footprint"
        ],
        "pages_sent": 73,
        "cost_usd": 0.528,
        "at": "2026-10-01T06:32:49"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/dp83826e",
        "pages": 115,
        "sha256": "0ddec6391c36bec1",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "dp83826erhbt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "dp83826erhbt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "11656878c40cd619999e5510502e86ff4cc85c7c1be6263c0a8ff916ec5d8a65",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "title": "DP83826ERHBT",
  "brief": "Texas Instruments Ethernet Transceivers, VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "VQFN-32-EP(5x5)",
      "Category": "Interface",
      "Pins": "33"
    }
  },
  "discovery_triggers": [
    "dp83826erhbt"
  ],
  "discovery_pitch": "DP83826ERHBT (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "visibility": "public"
}