main
Ray
Publish 0.1.1
839e894
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362
{
"slug": "dp83826erhbr",
"version": "0.1.1",
"type": "component",
"description": "Texas Instruments Global Sourcing Parts, VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"global sourcing parts",
"dp83826erhbr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"dp83826erhbr.kicad_sym",
"dp83826erhbr.kicad_mod",
"dp83826erhbr.glb",
"dp83826erhbr.step",
"dp83826erhbr.lbr",
"docs/hero.png",
"docs/dp83826erhbr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"dp83826erhbr-etched.step",
"dp83826erhbr-hero.glb",
"dp83826erhbr-hero.overlay.json"
],
"component": {
"mpn": "DP83826ERHBR",
"manufacturer": "Texas Instruments",
"package": "VQFN-32-EP(5x5)",
"pin_count": 33,
"category": "Global Sourcing Parts",
"subcategory": "Global Sourcing Parts",
"datasheet": "https://www.ti.com/cn/lit/gpn/dp83826e",
"parts": {
"symbol": "dp83826erhbr.kicad_sym",
"footprint": "dp83826erhbr.kicad_mod",
"model_3d": "dp83826erhbr-hero.glb",
"model_3d_plain": "dp83826erhbr.glb",
"model_3d_step": "dp83826erhbr-etched.step",
"model_3d_step_plain": "dp83826erhbr.step",
"lbr": "dp83826erhbr.lbr"
},
"distributor_links": {
"lcsc": "C1855770",
"digikey": "296-DP83826ERHBRTR-ND",
"mouser": "595-DP83826ERHBR"
},
"distributor_check": {
"checked_at": "2026-10-01T16:03:19Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-DP83826ERHBRTR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-DP83826ERHBR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "ModeSelect",
"type": "input",
"description": "Mode selection pin for enhanced mode (NC or pull high to VDDIO) or basic mode (connect to GND); internal pull-up."
},
{
"number": "2",
"name": "CEXT",
"type": "passive",
"description": "External capacitor connection pin; connect 2nF capacitor to GND for PLL stabilization."
},
{
"number": "3",
"name": "VDDA3V3",
"type": "power_in",
"description": "Analog power supply input voltage 3.3V with recommended decoupling capacitors."
},
{
"number": "4",
"name": "RD_M",
"type": "input",
"description": "Differential receive input (minus) for 10BASE-Te and 100BASE-TX PMD interface, auto-configurable per selected mode."
},
{
"number": "5",
"name": "RD_P",
"type": "input",
"description": "Differential receive input (plus) for 10BASE-Te and 100BASE-TX PMD interface, auto-configurable per selected mode."
},
{
"number": "6",
"name": "TD_M",
"type": "output",
"description": "Differential transmit output (minus) for 10BASE-Te and 100BASE-TX PMD interface, auto-configurable per selected mode."
},
{
"number": "7",
"name": "TD_P",
"type": "output",
"description": "Differential transmit output (plus) for 10BASE-Te and 100BASE-TX PMD interface, auto-configurable per selected mode."
},
{
"number": "8",
"name": "XO",
"type": "output",
"description": "Crystal oscillator output for reference clock; leave floating when CMOS oscillator connected to XI."
},
{
"number": "9",
"name": "XI/50MHzIn",
"type": "input",
"description": "Crystal oscillator input; requires 25MHz ±50ppm crystal/oscillator in MII or RMII leader mode, or 50MHz ±50ppm CMOS oscillator in RMII follower mode."
},
{
"number": "10",
"name": "RBIAS",
"type": "passive",
"description": "Bias resistor connection to GND with 6.49kΩ ±1% precision value for internal reference."
},
{
"number": "11",
"name": "MDIO",
"type": "bidirectional",
"description": "Bidirectional serial management data I/O with 10kΩ internal pull-up; capable of open-drain output for management access."
},
{
"number": "12",
"name": "MDC",
"type": "input",
"description": "Management data clock input synchronizing MDIO serial interface; maximum clock rate 25MHz with no minimum rate."
},
{
"number": "13",
"name": "RX_D3",
"type": "output",
"description": "Receive data bit 3 output synchronized to RX_CLK rising edge containing valid data when RX_DV asserted; half-nibble in MII mode or 2-bit in RMII mode."
},
{
"number": "14",
"name": "RX_D2",
"type": "output",
"description": "Receive data bit 2 output synchronized to RX_CLK rising edge containing valid data when RX_DV asserted; half-nibble in MII mode or 2-bit in RMII mode."
},
{
"number": "15",
"name": "RX_D1",
"type": "output",
"description": "Receive data bit 1 output synchronized to RX_CLK rising edge containing valid data when RX_DV asserted; half-nibble in MII mode or 2-bit in RMII mode."
},
{
"number": "16",
"name": "RX_D0",
"type": "output",
"description": "Receive data bit 0 output synchronized to RX_CLK rising edge containing valid data when RX_DV asserted; half-nibble in MII mode or 2-bit in RMII mode."
},
{
"number": "17",
"name": "VDDIO",
"type": "power_in",
"description": "I/O power supply input voltage 3.3V or 1.8V with recommended decoupling capacitors."
},
{
"number": "18",
"name": "RX_DV/CRS_DV",
"type": "output",
"description": "Receive data valid output in MII mode or combined carrier sense and RX valid (CRS_DV) in RMII mode; indicates valid data on RX_D[3:0] in MII or RX_D[1:0] in RMII."
},
{
"number": "19",
"name": "RX_CLK/50MHz_RMII",
"type": "output",
"description": "MII receive clock output at 25MHz for 100Mbps or 2.5MHz for 10Mbps derived from receive data; or 50MHz in RMII leader mode (unused input in RMII follower mode)."
},
{
"number": "20",
"name": "RX_ER",
"type": "output",
"description": "Receive error output synchronized to RX_CLK in MII mode or reference clock in RMII mode indicating error symbols detected in received packets."
},
{
"number": "21",
"name": "PWRDN/INT",
"type": "bidirectional",
"description": "Power down input (default) or interrupt output when configured via register; active-low open-drain output with 9.5kΩ internal pull-up."
},
{
"number": "22",
"name": "TX_CLK",
"type": "output",
"description": "MII transmit clock output at 25MHz for 100Mbps or 2.5MHz for 10Mbps with fixed phase to input clock; unused in RMII mode."
},
{
"number": "23",
"name": "TX_EN",
"type": "input",
"description": "Transmit enable input appearing on TX_CLK rising edge indicating valid transmit data on TX_D[3:0] in MII or TX_D[1:0] in RMII mode; active-high signal."
},
{
"number": "24",
"name": "TX_D0",
"type": "input",
"description": "Transmit data bit 0 input synchronized to TX_CLK rising edge in MII mode or reference clock edge in RMII mode."
},
{
"number": "25",
"name": "TX_D1",
"type": "input",
"description": "Transmit data bit 1 input synchronized to TX_CLK rising edge in MII mode or reference clock edge in RMII mode."
},
{
"number": "26",
"name": "TX_D2",
"type": "input",
"description": "Transmit data bit 2 input synchronized to TX_CLK rising edge in MII mode or reference clock edge in RMII mode."
},
{
"number": "27",
"name": "TX_D3",
"type": "input",
"description": "Transmit data bit 3 input synchronized to TX_CLK rising edge in MII mode or reference clock edge in RMII mode."
},
{
"number": "28",
"name": "COL/LED2/TX_ER/GPIO",
"type": "output",
"description": "Collision detection output (default) asserted in half-duplex when both transmit and receive active, configurable as LED2, MII TX_ER, or GPIO via register."
},
{
"number": "29",
"name": "CRS/LED3",
"type": "output",
"description": "Carrier sense output asserted when transmit or receive medium active in MII mode, configurable as LED3 status output; unused in RMII mode."
},
{
"number": "30",
"name": "LED0",
"type": "output",
"description": "Link status LED output indicating link state with activity blinking when transmitter or receiver active; polarity auto-detected from external pull configuration."
},
{
"number": "31",
"name": "CLKOUT/LED1",
"type": "output",
"description": "25MHz reference clock output from XI (default after power-on reset) or LED1 output for 100Mbps link indication; clock unaffected by reset, configurable via strap or register."
},
{
"number": "32",
"name": "RST_N",
"type": "input",
"description": "Active-low reset input requiring minimum 25µs pulse to force device reset; triggers strap resampling and resets all internal registers to default; internal pull-up."
},
{
"number": "33",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Device has two configurable operational modes (Enhanced and Basic) controlled by ModeSelect pin 1 st; Multiple pins (13-16, 20, 22, 28-31) function as hardware bootstrap straps during power-on. Strap pi; I/O voltage compatibility: VDDIO can be 3.3V or 1.8V independent of VDDA3V3 (always 3.3V). Verify th",
"exposed pad 33 added from the footprint",
"dropped thermal pad ['EP'] absent from footprint"
],
"pages_sent": 73,
"cost_usd": 0.5152,
"at": "2026-10-01T16:03:02"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/dp83826e",
"pages": 115,
"sha256": "0ddec6391c36bec1",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 33,
"described": 33,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "dp83826erhbr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "dp83826erhbr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "2ae89c4cd933c8fa6e2b34ae253b07a4d62ebf750540cdb254210ab3fc9a833f",
"checked": "2026-11-16",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"title": "DP83826ERHBR",
"brief": "Texas Instruments Global Sourcing Parts, VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "VQFN-32-EP(5x5)",
"Category": "Global Sourcing Parts",
"Pins": "33"
}
},
"discovery_triggers": [
"dp83826erhbr"
],
"discovery_pitch": "DP83826ERHBR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"visibility": "public"
}