component
DAC7563TDGSR
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DAC), VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDAC7563TDGSR
Texas Instruments · Digital To Analog Converters (DAC) · VSSOP-10-0.5mm
DAC7563TDGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUTA | output | Analog output voltage from DAC-A. |
| 2 | VOUTB | output | Analog output voltage from DAC-B. |
| 3 | GND | power_in | Ground reference point for all circuitry on the device. |
| 4 | LDAC | input | In synchronous mode, must be connected to GND or held low; in asynchronous mode, used as negative edge-triggered timing signal for simultaneous DAC updates. |
| 5 | CLR | input | Asynchronous clear input, falling-edge sensitive; loads mid-scale to input and DAC registers; exits clear mode on 24th falling edge of next write. |
| 6 | SYNC | input | Level-triggered (active-low) frame synchronization input; enables input shift register; DAC output updates on 24th SCLK falling edge; rising edge before 23rd clock acts as interrupt. |
| 7 | SCLK | input | Serial clock input with Schmitt-trigger logic; data transfer at rates up to 50 MHz. |
| 8 | DIN | input | Serial data input with Schmitt-trigger logic; data clocked into 24-bit shift register on each SCLK falling edge. |
| 9 | AVDD | power_in | Power-supply input voltage; recommended supply range 2.7V to 5.5V. |
| 10 | VREFIN/VREFOUT | bidirectional | Bidirectional voltage reference pin; provides 2.5V output when internal reference is used; can provide or absorb up to 20mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Data Acquisition |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
DAC7563TDGSR - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
dac7563tdgsr-etched.step/dac7563tdgsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dac7563tdgsr.step/dac7563tdgsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (63 pp, sha256
c924f9150c60d73e, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).