component
DAC084S085CIMM
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DAC), MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDAC084S085CIMM
Texas Instruments · Digital To Analog Converters (DAC) · MSOP-10
DAC084S085CIMM from Texas Instruments, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VA | power_in | Supply power input (2.7 V to 5.5 V) decoupled to GND. |
| 2 | VOUTA | output | Channel A analog output voltage (0 V to VREFIN). |
| 3 | VOUTB | output | Channel B analog output voltage (0 V to VREFIN). |
| 4 | VOUTC | output | Channel C analog output voltage (0 V to VREFIN). |
| 5 | VOUTD | output | Channel D analog output voltage (0 V to VREFIN). |
| 6 | GND | power_in | Ground reference for all on-chip circuitry. |
| 7 | VREFIN | input | Unbuffered reference voltage input (1 V to VA) shared by all channels, decoupled to GND. |
| 8 | DIN | input | Serial data input clocked into 16-bit shift register on SCLK falling edges after SYNC falls. |
| 9 | SYNC | input | Frame synchronization input (active low); rising edge before 16th SCLK edge aborts write sequence. |
| 10 | SCLK | input | Serial clock input (up to 40 MHz) clocking data into shift register on falling edges. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10 |
| Category | Data Acquisition |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
DAC084S085CIMM - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
dac084s085cimm-etched.step/dac084s085cimm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dac084s085cimm.step/dac084s085cimm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
d8a6f369a6e88b8e, retrieved 2026-09-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).