component
CP2615-A02-GM
Public Made by Adomby adom
SILICON LABS USB ICs, QFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345
{
"slug": "cp2615-a02-gm",
"version": "0.1.0",
"type": "component",
"description": "SILICON LABS USB ICs, QFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface ics",
"cp2615-a02-gm",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"cp2615-a02-gm.kicad_sym",
"cp2615-a02-gm.kicad_mod",
"cp2615-a02-gm.glb",
"cp2615-a02-gm.step",
"cp2615-a02-gm.lbr",
"docs/hero.png",
"docs/cp2615-a02-gm-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"cp2615-a02-gm-hero.glb",
"cp2615-a02-gm-hero.overlay.json",
"cp2615-a02-gm-etched.glb"
],
"component": {
"mpn": "CP2615-A02-GM",
"manufacturer": "SILICON LABS",
"package": "QFN-32-EP(5x5)",
"pin_count": 33,
"category": "Interface ICs",
"subcategory": "USB ICs",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/fd1cb66383e08ebb8d3025097186e06a.pdf",
"parts": {
"symbol": "cp2615-a02-gm.kicad_sym",
"footprint": "cp2615-a02-gm.kicad_mod",
"model_3d": "cp2615-a02-gm-hero.glb",
"model_3d_plain": "cp2615-a02-gm-etched.glb",
"model_3d_step": "cp2615-a02-gm-etched.step",
"model_3d_step_plain": "cp2615-a02-gm.step",
"lbr": "cp2615-a02-gm.lbr"
},
"distributor_links": {
"lcsc": "C1521596",
"digikey": "336-4719-ND",
"mouser": "634-CP2615-A02-GM"
},
"distributor_check": {
"checked_at": "2026-11-09T05:51:52Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "336-4719-ND",
"status": "found"
},
"mouser": {
"pn": "634-CP2615-A02-GM",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "I2S_SDIN",
"type": "input",
"description": "I2S interface serial data input to the CP2615, typically connected to an external ADC."
},
{
"number": "2",
"name": "I2S_SCLK",
"type": "output",
"description": "I2S interface serial clock output; the rising edge indicates valid data on I2S_SDOUT and I2S_SDIN."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "Ground; must be tied to system ground."
},
{
"number": "4",
"name": "D+",
"type": "bidirectional",
"description": "USB D+ data line (digital input/output) of the integrated full-speed USB transceiver."
},
{
"number": "5",
"name": "D-",
"type": "bidirectional",
"description": "USB D- data line (digital input/output) of the integrated full-speed USB transceiver."
},
{
"number": "6",
"name": "VDD",
"type": "power_in",
"description": "Power supply voltage input (2.7 to 3.6 V) that is also the output of the on-chip voltage regulator."
},
{
"number": "7",
"name": "REGIN",
"type": "power_in",
"description": "Input to the on-chip voltage regulator (2.7 to 5.25 V input range)."
},
{
"number": "8",
"name": "VBUS",
"type": "power_in",
"description": "VBUS sense input, to be connected to the Accessory Power signal or the VBUS signal from a USB host."
},
{
"number": "9",
"name": "RSTb",
"type": "bidirectional",
"description": "Device reset: open-drain output of the internal POR or VDD monitor, and an external source can reset the system by driving it low for at least 15 µs."
},
{
"number": "10",
"name": "NC",
"type": "unconnected",
"description": "No connect; this pin should be left unconnected."
},
{
"number": "11",
"name": "GPIO.7",
"type": "bidirectional",
"description": "GPIO or selectable alternate function; can be left unconnected if not used."
},
{
"number": "12",
"name": "GPIO.6",
"type": "bidirectional",
"description": "GPIO or selectable alternate function; can be left unconnected if not used."
},
{
"number": "13",
"name": "GPIO.5",
"type": "bidirectional",
"description": "GPIO or selectable alternate function; can be left unconnected if not used."
},
{
"number": "14",
"name": "GPIO.4",
"type": "bidirectional",
"description": "GPIO or selectable alternate function; can be left unconnected if not used."
},
{
"number": "15",
"name": "GPIO.3",
"type": "bidirectional",
"description": "GPIO or selectable alternate function; can be left unconnected if not used."
},
{
"number": "16",
"name": "GPIO.2",
"type": "bidirectional",
"description": "GPIO or selectable alternate function; can be left unconnected if not used."
},
{
"number": "17",
"name": "GPIO.1",
"type": "bidirectional",
"description": "GPIO or selectable alternate function; can be left unconnected if not used."
},
{
"number": "18",
"name": "GPIO.0",
"type": "bidirectional",
"description": "GPIO or selectable alternate function; can be left unconnected if not used."
},
{
"number": "19",
"name": "GPIO.9 / BUTTONS",
"type": "bidirectional",
"description": "GPIO, or BUTTONS analog input for sensing pushbuttons connected via a resistor ladder."
},
{
"number": "20",
"name": "GPIO.8 / ADC",
"type": "bidirectional",
"description": "GPIO, or ADC general purpose analog input readable via the I/O protocol (10-bit, referenced to VDD, about 50 samples per second)."
},
{
"number": "21",
"name": "CFGMODEb",
"type": "input",
"description": "Configuration mode input; if low when RSTb becomes deasserted, the CP2615 enters Configuration Mode (I2C slave)."
},
{
"number": "22",
"name": "GPIO.10 / RESETOUTb",
"type": "bidirectional",
"description": "GPIO, or active-low RESETOUTb output controllable via I2C command string, typically connected to the codec reset pin."
},
{
"number": "23",
"name": "GPIO.14 / RX",
"type": "bidirectional",
"description": "GPIO, or UART receive data input."
},
{
"number": "24",
"name": "GPIO.13 / TX",
"type": "bidirectional",
"description": "GPIO, or UART transmit data output."
},
{
"number": "25",
"name": "GPIO.12 / CLKOUT",
"type": "bidirectional",
"description": "GPIO, or configurable CMOS clock output (93.75 kHz when the divider is 0, otherwise 48 MHz / (2 x divider))."
},
{
"number": "26",
"name": "I2S_MCLK",
"type": "output",
"description": "I2S interface 12 MHz master clock output for the external audio converter."
},
{
"number": "27",
"name": "GPIO.11 / RTS",
"type": "bidirectional",
"description": "GPIO, or active-low UART RTS flow-control output."
},
{
"number": "28",
"name": "I2S_LRCLK",
"type": "output",
"description": "I2S interface left/right clock output indicating the channel being transferred, at the audio sample rate."
},
{
"number": "29",
"name": "I2C_SCL",
"type": "bidirectional",
"description": "I2C interface serial clock input/output, 100 kHz nominal, requiring an external pullup."
},
{
"number": "30",
"name": "I2C_SDA",
"type": "bidirectional",
"description": "I2C interface serial data input/output, requiring an external pullup."
},
{
"number": "31",
"name": "GPIO.15 / CTS",
"type": "bidirectional",
"description": "GPIO, or active-low UART CTS flow-control input."
},
{
"number": "32",
"name": "I2S_SDOUT",
"type": "output",
"description": "I2S interface serial data output from the CP2615, typically connected to an external DAC."
},
{
"number": "33",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Exposed pad is not listed in Table 4.1; number 33 is assigned by convention. The pinout figure only ; The pinout figure is titled CP2615-A01-GM, while the MPN is A02. Revision history says the part numb; VDD is both a power input and the on-chip regulator output (dual role). It is typed power_in. Verify",
"1/33 pin names appear NOWHERE in the datasheet text: ['4:D+@p29']"
],
"pages_sent": 29,
"cost_usd": 0.158,
"at": "2026-11-09T05:51:44"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/fd1cb66383e08ebb8d3025097186e06a.pdf",
"pages": 38,
"sha256": "fb528995c64b70ad",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 33,
"described": 33,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "cp2615-a02-gm.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
"checked": "2026-11-09",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "cp2615-a02-gm-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "7d5a99a37b274db3f5c8577ca27c19606bab562553d6c1d9e8dd6c9abfa962dc",
"checked": "2026-11-09",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}