main
Ray
Publish 0.1.0
f1de3cf
CP2102N-A02-GQFN28R
Silicon Labs · USB Converters · QFN-28-EP(5x5)
CP2102N-A02-GQFN28R from Silicon Labs, in a QFN-28-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DCD | input | Data Carrier Detect control input, active low. |
| 2 | RI/CLK | bidirectional | Ring Indicator control input (active low); the same pin also serves as the clock output (CLK). |
| 3 | GND | power_in | Ground. |
| 4 | D+ | bidirectional | USB Data Positive. |
| 5 | D- | bidirectional | USB Data Negative. |
| 6 | VDD | power_in | Supply power input, which is also the 5 V regulator output (3.3 V regulated supply per the feature list). |
| 7 | VREGIN | power_in | 5 V regulator input. |
| 8 | VBUS | power_in | VBUS sense input that should be connected to the USB VBUS signal; a 5 V signal on this pin indicates a USB connection. |
| 9 | RSTb | input | Active-low reset; driven low during power-on and power failure reset events. |
| 10 | NC | unconnected | No connect; leave this pin floating. |
| 11 | SUSPENDb | output | Digital output driven low when the device enters the USB suspend state. |
| 12 | SUSPEND | output | Digital output driven high when the device enters the USB suspend state. |
| 13 | CHREN | output | Digital output that enables the charging circuit (100 mA). |
| 14 | CHR1 | output | Digital output that enables the highest charging current (1.5 A). |
| 15 | CHR0 | output | Digital output that enables a higher charging current (500 mA). |
| 16 | GPIO.3/WAKEUP | bidirectional | General purpose I/O; alternatively the remote USB wakeup interrupt input (WAKEUP). |
| 17 | GPIO.2/RS485 | bidirectional | General purpose I/O; alternatively the RS485 control signal output. |
| 18 | GPIO.1/RXT | bidirectional | General purpose I/O; alternatively the receive LED toggle output. |
| 19 | GPIO.0/TXT | bidirectional | General purpose I/O; alternatively the transmit LED toggle output. |
| 20 | GPIO.6 | bidirectional | General purpose I/O. |
| 21 | GPIO.5 | bidirectional | General purpose I/O. |
| 22 | GPIO.4 | bidirectional | General purpose I/O. |
| 23 | CTS | input | Clear To Send control input, active low. |
| 24 | RTS | output | Ready To Send control output, active low. |
| 25 | RXD | input | Asynchronous data input (UART receive). |
| 26 | TXD | output | Asynchronous data output (UART transmit). |
| 27 | DSR | input | Data Set Ready control input, active low. |
| 28 | DTR | output | Data Terminal Ready control output, active low. |
| 29 | GND | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Silicon Labs |
| Package | QFN-28-EP(5x5) |
| Category | Interface |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Supply Voltage on VDD | VDD | 3 | 3.6 | V | 10 | ||
| Operating Supply Voltage on VIO | VIO | 1.71 | V | 10 | |||
| Operating Supply Voltage on VREGIN | VREGIN | 3 | 5.25 | V | 10 | ||
| Operating Ambient Temperature | TA | -40 | 85 | °C | 10 | ||
| USB Pull-up current | IPU | 200 | 230 | µA | 10 | ||
| VDD Supply Monitor Threshold | VVDDM | 1.95 | 2.05 | 2.15 | V | 11 | |
| Power-On Reset (POR) Threshold falling voltage | VPOR | 0.75 | 1.36 | V | Falling Voltage on VDD | 11 | |
| VDD Ramp Time | tRMP | 10 | μs | Time to VDD > 2.2 V | 11 | ||
| Reset Delay from POR | tPOR | 3 | 10 | 31 | ms | Relative to VDD > VPOR | 11 |
| RSTb Low Time to Generate Reset | tRSTL | 15 | μs | 11 | |||
| VDD Voltage During Programming | VPROG | 3 | 3.6 | V | 11 | ||
| Internal Oscillator Frequency | fOSC | 47.3 | 48 | 48.7 | MHz | Full Temperature and Supply Range | 11 |
| Output High Voltage | VOH | 2.8 | V | VDD ≥ 3.0V | 14 | ||
| Output Low Voltage | VOL | 0.8 | V | VDD ≥ 3.0V | 14 | ||
| Output Crossover Point | VCRS | 1.3 | 2 | V | 14 | ||
| Output Impedance ZDRV | ZDRV | 28 | 36 | 44 | Ω | Driving High | 14 |
| Pull-up Resistance | RPU | 1.425 | 1.5 | 1.575 | kΩ | Full Speed (D+ Pull-up) | 14 |
| Output Rise Time | TR | 4 | 20 | ns | Full Speed | 14 | |
| Output Fall Time | TF | 4 | 20 | ns | Full Speed | 14 | |
| Differential Input Sensitivity | VDI | 0.2 | V | 14 | |||
| Differential Input Common Mode Range | VCM | 0.8 | 2.5 | V | 14 | ||
| Ambient Temperature Under Bias | TBIAS | -55 | 125 | °C | 15 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 15 | ||
| Voltage on VDD | VDD | 4.2 | V | 15 | |||
| Voltage on VIO | VIO | 4.2 | V | 15 | |||
| Voltage on VREGIN | VREGIN | 5.8 | V | 15 | |||
| Voltage on UART pins, GPIO, VBUS, RSTb, or any other non-power, non-USB pin | VIN | 5.8 | V | VIO > 3.3 V | 15 | ||
| Total Current Sunk into Supply Pin | IVDD | 400 | mA | 15 | |||
| Total Current Sourced out of Ground Pin | IGND | 400 | mA | 15 | |||
| Current Sourced or Sunk by any UART pins, GPIO, VBUS, RSTb, or any other non-power, non-USB pin | IIO | -100 | 100 | mA | 15 | ||
| Operating Junction Temperature | TJ | -40 | 105 | °C | 15 | ||
| Normal Operation supply current | IDD | 9.5 | mA | 115200 baud transmitting continuous bidirectional data | 10 | ||
| Normal Operation supply current | IDD | 13.7 | mA | 3 Mbaud transmitting continuous bidirectional data | 10 | ||
| USB Suspend supply current | IDD | 195 | µA | 10 | |||
| Held in Reset supply current | IDD | 1.3 | mA | 10 | |||
| Power-On Reset (POR) Threshold rising voltage | VPOR | 1.2 | V | Rising Voltage on VDD | 11 | ||
| Reset Delay from non-POR source | tRST | 50 | μs | Time between release of reset source and code execution | 11 | ||
| Temperature Sensitivity | TSOSC | 45 | ppm/°C | VDD = 3.0 V | 11 | ||
| Power Supply Sensitivity | PSSOSC | 0.02 | %/V | TA = 25 °C | 11 | ||
| Thermal Resistance (Junction to Ambient) | θJA | 26 | °C/W | QFN28 Packages | 14 | ||
| Thermal Resistance (Junction to Case) | θJC | 18.8 | °C/W | QFN28 Packages | 14 | ||
| Thermal Characterization Parameter (Junction to Top) | ΨJT | 0.3 | °C/W | QFN28 Packages | 14 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. | 34 |
CAD (KiCad official)
- Symbol:
CP2102N-A02-GQFN28R - Footprint:
Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm - 3D model: QFN-28-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
cp2102n-a02-gqfn28r-etched.step/cp2102n-a02-gqfn28r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cp2102n-a02-gqfn28r.step/cp2102n-a02-gqfn28r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Silicon Labs datasheet (48 pp, sha256
70ea7a01045ccfb0, retrieved 2026-11-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# CP2102N-A02-GQFN28R
**Silicon Labs** · USB Converters · QFN-28-EP(5x5)
CP2102N-A02-GQFN28R from Silicon Labs, in a QFN-28-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DCD | input | Data Carrier Detect control input, active low. |
| 2 | RI/CLK | bidirectional | Ring Indicator control input (active low); the same pin also serves as the clock output (CLK). |
| 3 | GND | power_in | Ground. |
| 4 | D+ | bidirectional | USB Data Positive. |
| 5 | D- | bidirectional | USB Data Negative. |
| 6 | VDD | power_in | Supply power input, which is also the 5 V regulator output (3.3 V regulated supply per the feature list). |
| 7 | VREGIN | power_in | 5 V regulator input. |
| 8 | VBUS | power_in | VBUS sense input that should be connected to the USB VBUS signal; a 5 V signal on this pin indicates a USB connection. |
| 9 | RSTb | input | Active-low reset; driven low during power-on and power failure reset events. |
| 10 | NC | unconnected | No connect; leave this pin floating. |
| 11 | SUSPENDb | output | Digital output driven low when the device enters the USB suspend state. |
| 12 | SUSPEND | output | Digital output driven high when the device enters the USB suspend state. |
| 13 | CHREN | output | Digital output that enables the charging circuit (100 mA). |
| 14 | CHR1 | output | Digital output that enables the highest charging current (1.5 A). |
| 15 | CHR0 | output | Digital output that enables a higher charging current (500 mA). |
| 16 | GPIO.3/WAKEUP | bidirectional | General purpose I/O; alternatively the remote USB wakeup interrupt input (WAKEUP). |
| 17 | GPIO.2/RS485 | bidirectional | General purpose I/O; alternatively the RS485 control signal output. |
| 18 | GPIO.1/RXT | bidirectional | General purpose I/O; alternatively the receive LED toggle output. |
| 19 | GPIO.0/TXT | bidirectional | General purpose I/O; alternatively the transmit LED toggle output. |
| 20 | GPIO.6 | bidirectional | General purpose I/O. |
| 21 | GPIO.5 | bidirectional | General purpose I/O. |
| 22 | GPIO.4 | bidirectional | General purpose I/O. |
| 23 | CTS | input | Clear To Send control input, active low. |
| 24 | RTS | output | Ready To Send control output, active low. |
| 25 | RXD | input | Asynchronous data input (UART receive). |
| 26 | TXD | output | Asynchronous data output (UART transmit). |
| 27 | DSR | input | Data Set Ready control input, active low. |
| 28 | DTR | output | Data Terminal Ready control output, active low. |
| 29 | GND | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Silicon Labs |
| Package | QFN-28-EP(5x5) |
| Category | Interface |
| Pins | 29 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Supply Voltage on VDD | VDD | 3 | | 3.6 | V | | 10 |
| Operating Supply Voltage on VIO | VIO | 1.71 | | | V | | 10 |
| Operating Supply Voltage on VREGIN | VREGIN | 3 | | 5.25 | V | | 10 |
| Operating Ambient Temperature | TA | -40 | | 85 | °C | | 10 |
| USB Pull-up current | IPU | | 200 | 230 | µA | | 10 |
| VDD Supply Monitor Threshold | VVDDM | 1.95 | 2.05 | 2.15 | V | | 11 |
| Power-On Reset (POR) Threshold falling voltage | VPOR | 0.75 | | 1.36 | V | Falling Voltage on VDD | 11 |
| VDD Ramp Time | tRMP | 10 | | | μs | Time to VDD > 2.2 V | 11 |
| Reset Delay from POR | tPOR | 3 | 10 | 31 | ms | Relative to VDD > VPOR | 11 |
| RSTb Low Time to Generate Reset | tRSTL | 15 | | | μs | | 11 |
| VDD Voltage During Programming | VPROG | 3 | | 3.6 | V | | 11 |
| Internal Oscillator Frequency | fOSC | 47.3 | 48 | 48.7 | MHz | Full Temperature and Supply Range | 11 |
| Output High Voltage | VOH | 2.8 | | | V | VDD ≥ 3.0V | 14 |
| Output Low Voltage | VOL | | | 0.8 | V | VDD ≥ 3.0V | 14 |
| Output Crossover Point | VCRS | 1.3 | | 2 | V | | 14 |
| Output Impedance ZDRV | ZDRV | 28 | 36 | 44 | Ω | Driving High | 14 |
| Pull-up Resistance | RPU | 1.425 | 1.5 | 1.575 | kΩ | Full Speed (D+ Pull-up) | 14 |
| Output Rise Time | TR | 4 | | 20 | ns | Full Speed | 14 |
| Output Fall Time | TF | 4 | | 20 | ns | Full Speed | 14 |
| Differential Input Sensitivity | VDI | 0.2 | | | V | | 14 |
| Differential Input Common Mode Range | VCM | 0.8 | | 2.5 | V | | 14 |
| Ambient Temperature Under Bias | TBIAS | -55 | | 125 | °C | | 15 |
| Storage Temperature | TSTG | -65 | | 150 | °C | | 15 |
| Voltage on VDD | VDD | | | 4.2 | V | | 15 |
| Voltage on VIO | VIO | | | 4.2 | V | | 15 |
| Voltage on VREGIN | VREGIN | | | 5.8 | V | | 15 |
| Voltage on UART pins, GPIO, VBUS, RSTb, or any other non-power, non-USB pin | VIN | | | 5.8 | V | VIO > 3.3 V | 15 |
| Total Current Sunk into Supply Pin | IVDD | | | 400 | mA | | 15 |
| Total Current Sourced out of Ground Pin | IGND | 400 | | | mA | | 15 |
| Current Sourced or Sunk by any UART pins, GPIO, VBUS, RSTb, or any other non-power, non-USB pin | IIO | -100 | | 100 | mA | | 15 |
| Operating Junction Temperature | TJ | -40 | | 105 | °C | | 15 |
| Normal Operation supply current | IDD | | 9.5 | | mA | 115200 baud transmitting continuous bidirectional data | 10 |
| Normal Operation supply current | IDD | | 13.7 | | mA | 3 Mbaud transmitting continuous bidirectional data | 10 |
| USB Suspend supply current | IDD | | 195 | | µA | | 10 |
| Held in Reset supply current | IDD | | 1.3 | | mA | | 10 |
| Power-On Reset (POR) Threshold rising voltage | VPOR | | 1.2 | | V | Rising Voltage on VDD | 11 |
| Reset Delay from non-POR source | tRST | | 50 | | μs | Time between release of reset source and code execution | 11 |
| Temperature Sensitivity | TSOSC | | 45 | | ppm/°C | VDD = 3.0 V | 11 |
| Power Supply Sensitivity | PSSOSC | | 0.02 | | %/V | TA = 25 °C | 11 |
| Thermal Resistance (Junction to Ambient) | θJA | | 26 | | °C/W | QFN28 Packages | 14 |
| Thermal Resistance (Junction to Case) | θJC | | 18.8 | | °C/W | QFN28 Packages | 14 |
| Thermal Characterization Parameter (Junction to Top) | ΨJT | | 0.3 | | °C/W | QFN28 Packages | 14 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | | 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. | 34 |
## CAD (KiCad official)
- Symbol: `CP2102N-A02-GQFN28R`
- Footprint: `Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm`
- 3D model: QFN-28-EP(5x5) (KiCad packages3D, STEP)
- 3D model files: `cp2102n-a02-gqfn28r-etched.step` / `cp2102n-a02-gqfn28r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cp2102n-a02-gqfn28r.step` / `cp2102n-a02-gqfn28r.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Silicon Labs datasheet](docs/cp2102n-a02-gqfn28r-datasheet.pdf) (48 pp, sha256 `70ea7a01045ccfb0`, retrieved 2026-11-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/cp2102n-a02-gqfn28r-datasheet.pdf)