main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers cp2102n-a02-gqfn28r: viewers · Ray
cp2102n-a02-gqfn28r-etched.glb cp2102n-a02-gqfn28r: factory component page (tier=lcsc) · Ray
cp2102n-a02-gqfn28r-etched.step cp2102n-a02-gqfn28r: factory component page (tier=lcsc) · Ray
cp2102n-a02-gqfn28r-hero.glb cp2102n-a02-gqfn28r: hero GLB from the etched model (keeps the MPN mark) · Ray
cp2102n-a02-gqfn28r-hero.overlay.json cp2102n-a02-gqfn28r: hero GLB from the etched model (keeps the MPN mark) · Ray
cp2102n-a02-gqfn28r.glb Publish 0.1.0 · Ray
cp2102n-a02-gqfn28r.kicad_mod Publish 0.1.0 · Ray
cp2102n-a02-gqfn28r.kicad_sym Publish 0.1.0 · Ray
cp2102n-a02-gqfn28r.lbr Publish 0.1.0 · Ray
cp2102n-a02-gqfn28r.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 29 pins · Ray

CP2102N-A02-GQFN28R

Silicon Labs · USB Converters · QFN-28-EP(5x5)

CP2102N-A02-GQFN28R from Silicon Labs, in a QFN-28-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DCD input Data Carrier Detect control input, active low.
2 RI/CLK bidirectional Ring Indicator control input (active low); the same pin also serves as the clock output (CLK).
3 GND power_in Ground.
4 D+ bidirectional USB Data Positive.
5 D- bidirectional USB Data Negative.
6 VDD power_in Supply power input, which is also the 5 V regulator output (3.3 V regulated supply per the feature list).
7 VREGIN power_in 5 V regulator input.
8 VBUS power_in VBUS sense input that should be connected to the USB VBUS signal; a 5 V signal on this pin indicates a USB connection.
9 RSTb input Active-low reset; driven low during power-on and power failure reset events.
10 NC unconnected No connect; leave this pin floating.
11 SUSPENDb output Digital output driven low when the device enters the USB suspend state.
12 SUSPEND output Digital output driven high when the device enters the USB suspend state.
13 CHREN output Digital output that enables the charging circuit (100 mA).
14 CHR1 output Digital output that enables the highest charging current (1.5 A).
15 CHR0 output Digital output that enables a higher charging current (500 mA).
16 GPIO.3/WAKEUP bidirectional General purpose I/O; alternatively the remote USB wakeup interrupt input (WAKEUP).
17 GPIO.2/RS485 bidirectional General purpose I/O; alternatively the RS485 control signal output.
18 GPIO.1/RXT bidirectional General purpose I/O; alternatively the receive LED toggle output.
19 GPIO.0/TXT bidirectional General purpose I/O; alternatively the transmit LED toggle output.
20 GPIO.6 bidirectional General purpose I/O.
21 GPIO.5 bidirectional General purpose I/O.
22 GPIO.4 bidirectional General purpose I/O.
23 CTS input Clear To Send control input, active low.
24 RTS output Ready To Send control output, active low.
25 RXD input Asynchronous data input (UART receive).
26 TXD output Asynchronous data output (UART transmit).
27 DSR input Data Set Ready control input, active low.
28 DTR output Data Terminal Ready control output, active low.
29 GND passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Silicon Labs
Package QFN-28-EP(5x5)
Category Interface
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Supply Voltage on VDD VDD 3 3.6 V 10
Operating Supply Voltage on VIO VIO 1.71 V 10
Operating Supply Voltage on VREGIN VREGIN 3 5.25 V 10
Operating Ambient Temperature TA -40 85 °C 10
USB Pull-up current IPU 200 230 µA 10
VDD Supply Monitor Threshold VVDDM 1.95 2.05 2.15 V 11
Power-On Reset (POR) Threshold falling voltage VPOR 0.75 1.36 V Falling Voltage on VDD 11
VDD Ramp Time tRMP 10 μs Time to VDD > 2.2 V 11
Reset Delay from POR tPOR 3 10 31 ms Relative to VDD > VPOR 11
RSTb Low Time to Generate Reset tRSTL 15 μs 11
VDD Voltage During Programming VPROG 3 3.6 V 11
Internal Oscillator Frequency fOSC 47.3 48 48.7 MHz Full Temperature and Supply Range 11
Output High Voltage VOH 2.8 V VDD ≥ 3.0V 14
Output Low Voltage VOL 0.8 V VDD ≥ 3.0V 14
Output Crossover Point VCRS 1.3 2 V 14
Output Impedance ZDRV ZDRV 28 36 44 Ω Driving High 14
Pull-up Resistance RPU 1.425 1.5 1.575 kΩ Full Speed (D+ Pull-up) 14
Output Rise Time TR 4 20 ns Full Speed 14
Output Fall Time TF 4 20 ns Full Speed 14
Differential Input Sensitivity VDI 0.2 V 14
Differential Input Common Mode Range VCM 0.8 2.5 V 14
Ambient Temperature Under Bias TBIAS -55 125 °C 15
Storage Temperature TSTG -65 150 °C 15
Voltage on VDD VDD 4.2 V 15
Voltage on VIO VIO 4.2 V 15
Voltage on VREGIN VREGIN 5.8 V 15
Voltage on UART pins, GPIO, VBUS, RSTb, or any other non-power, non-USB pin VIN 5.8 V VIO > 3.3 V 15
Total Current Sunk into Supply Pin IVDD 400 mA 15
Total Current Sourced out of Ground Pin IGND 400 mA 15
Current Sourced or Sunk by any UART pins, GPIO, VBUS, RSTb, or any other non-power, non-USB pin IIO -100 100 mA 15
Operating Junction Temperature TJ -40 105 °C 15
Normal Operation supply current IDD 9.5 mA 115200 baud transmitting continuous bidirectional data 10
Normal Operation supply current IDD 13.7 mA 3 Mbaud transmitting continuous bidirectional data 10
USB Suspend supply current IDD 195 µA 10
Held in Reset supply current IDD 1.3 mA 10
Power-On Reset (POR) Threshold rising voltage VPOR 1.2 V Rising Voltage on VDD 11
Reset Delay from non-POR source tRST 50 μs Time between release of reset source and code execution 11
Temperature Sensitivity TSOSC 45 ppm/°C VDD = 3.0 V 11
Power Supply Sensitivity PSSOSC 0.02 %/V TA = 25 °C 11
Thermal Resistance (Junction to Ambient) θJA 26 °C/W QFN28 Packages 14
Thermal Resistance (Junction to Case) θJC 18.8 °C/W QFN28 Packages 14
Thermal Characterization Parameter (Junction to Top) ΨJT 0.3 °C/W QFN28 Packages 14

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. 34

CAD (KiCad official)

  • Symbol: CP2102N-A02-GQFN28R
  • Footprint: Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm
  • 3D model: QFN-28-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: cp2102n-a02-gqfn28r-etched.step / cp2102n-a02-gqfn28r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); cp2102n-a02-gqfn28r.step / cp2102n-a02-gqfn28r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Silicon Labs datasheet (48 pp, sha256 70ea7a01045ccfb0, retrieved 2026-11-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF