component
CLVC1G374QDCKRQ1
Public Made by Adomby adom
Texas Instruments Flip Flops, SC-70-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownCLVC1G374QDCKRQ1
Texas Instruments · Flip Flops · SC-70-6
CLVC1G374QDCKRQ1 from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Buffered output-enable input; OE low allows Q to output normal logic levels, OE high forces Q to the high-impedance (3-state) state without affecting internal flip-flop operation. |
| 2 | VCC | power_in | Supply voltage pin; recommended operating range is 1.65 V to 5.5 V (1.5 V minimum for data retention only). |
| 3 | Q | tri_state | 3-state data output that is set to the logic level present at D on the positive-going transition of CLK, and goes to high impedance when OE is high. |
| 4 | D | input | Data input whose logic level is transferred to Q on the low-to-high transition of CLK; accepts input voltages up to 5.5 V. |
| 5 | GND | power_in | Ground reference pin for the device. |
| 6 | CLK | input | Clock input; on the positive (low-to-high) transition of CLK, the D input logic level is latched to the Q output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Logic |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
CLVC1G374QDCKRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
clvc1g374qdckrq1-etched.step/clvc1g374qdckrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);clvc1g374qdckrq1.step/clvc1g374qdckrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (18 pp, sha256
e192d0818c572b44, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).