CLM2543CDW

{
  "slug": "clm2543cdw",
  "version": "0.1.0",
  "type": "component",
  "description": "CHIPLON Analog To Digital Converters (ADCs), SOIC-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "adc-dac-data conversion",
    "clm2543cdw",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "clm2543cdw.kicad_sym",
    "clm2543cdw.kicad_mod",
    "clm2543cdw.glb",
    "clm2543cdw.step",
    "clm2543cdw.lbr",
    "docs/hero.png",
    "docs/clm2543cdw-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "clm2543cdw-hero.glb",
    "clm2543cdw-hero.overlay.json",
    "clm2543cdw-etched.glb"
  ],
  "component": {
    "mpn": "CLM2543CDW",
    "manufacturer": "CHIPLON",
    "package": "SOIC-20",
    "pin_count": 20,
    "category": "ADC/DAC/Data Conversion",
    "subcategory": "Analog To Digital Converters (ADCs)",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/77aaa084f3ef16d4f6eff19c3070d484.pdf",
    "parts": {
      "symbol": "clm2543cdw.kicad_sym",
      "footprint": "clm2543cdw.kicad_mod",
      "model_3d": "clm2543cdw-hero.glb",
      "model_3d_plain": "clm2543cdw-etched.glb",
      "model_3d_step": "clm2543cdw-etched.step",
      "model_3d_step_plain": "clm2543cdw.step",
      "lbr": "clm2543cdw.lbr"
    },
    "distributor_links": {
      "lcsc": "C437259"
    },
    "distributor_check": {
      "checked_at": "2026-10-22T23:02:22Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 724 calls left today"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "AIN0",
        "type": "input",
        "description": "Analog input 0, multiplexed internally; for 4.1 MHz I/O CLOCK operation drive source impedance should be ≤50 Ω and able to charge 60 pF."
      },
      {
        "number": "2",
        "name": "AIN1",
        "type": "input",
        "description": "Analog input 1, multiplexed internally; for 4.1 MHz I/O CLOCK operation drive source impedance should be ≤50 Ω and able to charge 60 pF."
      },
      {
        "number": "3",
        "name": "AIN2",
        "type": "input",
        "description": "Analog input 2, multiplexed internally; for 4.1 MHz I/O CLOCK operation drive source impedance should be ≤50 Ω and able to charge 60 pF."
      },
      {
        "number": "4",
        "name": "AIN3",
        "type": "input",
        "description": "Analog input 3, multiplexed internally; for 4.1 MHz I/O CLOCK operation drive source impedance should be ≤50 Ω and able to charge 60 pF."
      },
      {
        "number": "5",
        "name": "AIN4",
        "type": "input",
        "description": "Analog input 4, multiplexed internally; for 4.1 MHz I/O CLOCK operation drive source impedance should be ≤50 Ω and able to charge 60 pF."
      },
      {
        "number": "6",
        "name": "AIN5",
        "type": "input",
        "description": "Analog input 5, multiplexed internally; for 4.1 MHz I/O CLOCK operation drive source impedance should be ≤50 Ω and able to charge 60 pF."
      },
      {
        "number": "7",
        "name": "AIN6",
        "type": "input",
        "description": "Analog input 6, multiplexed internally; for 4.1 MHz I/O CLOCK operation drive source impedance should be ≤50 Ω and able to charge 60 pF."
      },
      {
        "number": "8",
        "name": "AIN7",
        "type": "input",
        "description": "Analog input 7, multiplexed internally; for 4.1 MHz I/O CLOCK operation drive source impedance should be ≤50 Ω and able to charge 60 pF."
      },
      {
        "number": "9",
        "name": "AIN8",
        "type": "input",
        "description": "Analog input 8, multiplexed internally; for 4.1 MHz I/O CLOCK operation drive source impedance should be ≤50 Ω and able to charge 60 pF."
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return terminal for the internal circuitry; all voltage measurements are referenced to GND unless otherwise noted."
      },
      {
        "number": "11",
        "name": "AIN9",
        "type": "input",
        "description": "Analog input 9, multiplexed internally; for 4.1 MHz I/O CLOCK operation drive source impedance should be ≤50 Ω and able to charge 60 pF."
      },
      {
        "number": "12",
        "name": "AIN10",
        "type": "input",
        "description": "Analog input 10, multiplexed internally; for 4.1 MHz I/O CLOCK operation drive source impedance should be ≤50 Ω and able to charge 60 pF."
      },
      {
        "number": "13",
        "name": "REF–",
        "type": "input",
        "description": "Negative reference voltage, the lower reference value (normally ground); input range is set by the difference between REF+ and REF-."
      },
      {
        "number": "14",
        "name": "REF+",
        "type": "input",
        "description": "Positive reference voltage, the upper reference value (normally VCC); maximum input range is set by the difference between REF+ and REF-."
      },
      {
        "number": "15",
        "name": "CS",
        "type": "input",
        "description": "Chip select; a high-to-low transition resets the internal counter and controls and enables DATA OUT, DATA INPUT and I/O CLOCK, while low-to-high disables DATA INPUT and I/O CLOCK within the setup time."
      },
      {
        "number": "16",
        "name": "DATA OUT",
        "type": "tri_state",
        "description": "Three-state serial output of the A/D conversion result, high-impedance when CS is high and driven with the previous result's MSB/LSB when CS is low, with subsequent bits shifted out on I/O CLOCK falling edges."
      },
      {
        "number": "17",
        "name": "DATA INPUT",
        "type": "input",
        "description": "Serial data input; a 4-bit serial address, MSB first and shifted in on the first four rising edges of I/O CLOCK, selects the analog input or test voltage before conversion."
      },
      {
        "number": "18",
        "name": "I/O CLOCK",
        "type": "input",
        "description": "Input/output clock, 0 to 4.1 MHz, that shifts the 8 input data bits in on rising edges, shifts conversion data out of DATA OUT on falling edges, and hands conversion control to the internal state controller on the last falling edge."
      },
      {
        "number": "19",
        "name": "EOC",
        "type": "output",
        "description": "End-of-conversion output that goes low after the last I/O CLOCK falling edge and stays low until the conversion is complete and data is ready for transfer."
      },
      {
        "number": "20",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply voltage, 4.5 V to 5.5 V recommended (absolute maximum 6.5 V)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table prints the chip-select name with an overbar that was lost in extraction (pin 15 shown ; The pin table lists the generic DB/DW/J/N pinout; the datasheet text does not show a package-specifi",
          "11/20 pins cited to the wrong page (name found elsewhere): ['1:AIN0@p3', '2:AIN1@p3', '3:AIN2@p3', '4:AIN3@p3']"
        ],
        "pages_sent": 36,
        "cost_usd": 0.2095,
        "at": "2026-10-22T23:02:03"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/77aaa084f3ef16d4f6eff19c3070d484.pdf",
        "pages": 36,
        "sha256": "c4eaa1a29bcf6331",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "clm2543cdw.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",
        "checked": "2026-10-22",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "clm2543cdw-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4772d30836f637ccc11cf5311e6a61194e04891efb3951cc5f1884d62a3bbf5c",
        "checked": "2026-10-22",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}