component
CL9906A18L3M
Public Made by Adomby adom
CHIPLINK(芯联) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownCL9906A18L3M
CHIPLINK(芯联) · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3L
CL9906A18L3M from CHIPLINK(芯联), in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground terminal of the regulator (接地端), which is pin 1 in the SOT-23-3L column of the pin table. |
| 2 | VOUT | power_out | Regulated output (1.8 V nominal for the A18 variant); the VOUT pin voltage is limited to GND-0.3 V to VIN+0.3 V and the output current to 250 mA maximum at VIN=3.3 V. |
| 3 | VIN | power_in | Power supply input; maximum input voltage is 6.5 V, and the VIN pin absolute maximum rating is -0.3 V to +7.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CHIPLINK(芯联) |
| Package | SOT-23-3L |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (A18 variant, 1.8 V) | VOUT | 1.764 | 1.8 | 1.836 | V | VIN =3.3V, IOUT=30mA | 5 |
| Load regulation | ΔVOUT | 15 | mV | VIN=3.3V, 1mA≤IOUT≤100mA | 5 | ||
| Load regulation | ΔVOUT | 30 | mV | VIN=3.3V, 1mA≤IOUT≤200mA | 5 | ||
| Dropout voltage | Vdif1 | 70 | mV | IOUT =30mA | 5 | ||
| Dropout voltage | Vdif2 | 240 | mV | IOUT =100mA | 5 | ||
| Line regulation | ΔVOUT/(ΔVIN*VOUT) | 0.05 | %/V | IOUT =30mA, 3.3≤VIN≤7V | 5 | ||
| Maximum output current | IOUT (max) | 250 | mA | VIN =3.3V | 5 | ||
| Short-circuit current | ISHORT | 50 | mA | VIN =3.3V | 5 | ||
| Overcurrent protection current | ILIMIT | 300 | mA | VIN =3.3V | 5 | ||
| Quiescent current | IQ | 1 | uA | 5 | |||
| Input voltage | VIN | 6.5 | V | 5 | |||
| Input voltage (absolute) | VIN | -0.3 | 7 | V | 3 | ||
| VOUT pin voltage | VOUT | -0.3 | V | Referenced to GND; upper limit printed as VIN+0.3 V | 3 | ||
| VOUT pin current | IOUT | 500 | mA | Note (1): IOUT ≤ Pd/(VIN−VOUT) | 3 | ||
| Maximum power dissipation, SOT23_3L | Pd | 300 | mW | 3 | |||
| Maximum power dissipation, SOT23_3L | Pd | 600 | mW | With increased PCB heat dissipation (reference only) | 3 | ||
| Operating ambient temperature | Topr | -25 | 85 | C | 3 | ||
| Storage temperature | Tstg | -40 | 125 | C | 3 | ||
| Soldering temperature | Tsolder | 260 | C | 10s | 3 | ||
| ESD human body model | 4000 | V | HBM | 3 | |||
| ESD machine model | 400 | V | MM | 3 | |||
| Latch-up level | 400 | mA | 3 |
CAD (KiCad official)
- Symbol:
CL9906A18L3M - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
cl9906a18l3m-etched.step/cl9906a18l3m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cl9906a18l3m.step/cl9906a18l3m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: CHIPLINK(芯联) datasheet (12 pp, sha256
defc25fc4da55cd3, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).