# CI5930-20A

**Tokmas** · Current Sensors · SOP-8

CI5930-20A from Tokmas, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Current sampled positive input, one of two pins (1-2) of the primary conductor with 0.9 mΩ typical resistance, rated 600 VPK relative to GND. |
| 2 | IP+ | passive | Current sampled positive input, one of two pins (1-2) of the primary conductor with 0.9 mΩ typical resistance, rated 600 VPK relative to GND. |
| 3 | IP- | passive | Current sampled negative input, one of two pins (3-4) of the primary conductor; current flowing from IP+ to IP- is positive. |
| 4 | IP- | passive | Current sampled negative input, one of two pins (3-4) of the primary conductor; current flowing from IP+ to IP- is positive. |
| 5 | GND | power_in | Ground reference for the signal side, isolated from pins 1-4 by 3500 VRMS. |
| 6 | VZCR | output | Zero current reference signal output of 2.500 V typical, with 400 µA max source and 3000 µA max sink current. |
| 7 | OUT | output | Analog voltage output equal to VCC/2 plus sensitivity times IP (400 mV/A for 5A to 40 mV/A for 50A parts), with load of at least 1.5 kΩ and at most 1 nF. |
| 8 | VCC | power_in | Power supply input, 4.5 V to 5.5 V recommended (7 V absolute maximum). |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Tokmas |
| Package | SOP-8 |
| Category | Sensors |
| Pins | 8 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Sensitivity | Sens | 97 | 100 | 103 | mV/A | full range of IP | 5 |
| Zero Current Differential Output Error | VOE | -25 |  | 25 | mV |  | 5 |
| Total Output Error | ETOT | -3 |  | 3 | % |  | 5 |
| Current Accuracy Range | IP | -20 |  | 20 | A |  | 5 |
| Power Supply | VCC | 4.5 |  | 5.5 | V | Ta=25°C and VCC=5V | 4 |
| Supply Current | ICC |  | 20 | 25 | mA | OUT pin floated | 4 |
| Internal benchmark | VZCR | 2.47 | 2.5 | 2.53 | V |  | 4 |
| Zero Current Output Voltage | VOUT(Q) | 2.49 | 2.5 | 2.51 | V | IP=0 | 4 |
| Output Capacitance Load | CL |  |  | 1 | nF |  | 4 |
| Output Resistive Load | RL | 1.5 |  |  | kΩ |  | 4 |
| Res. of Primary Conductor | RP |  | 0.9 | 1.2 | mΩ | IP=2A | 4 |
| Propagation Time | tD |  | 1 | 2 | μs |  | 4 |
| Rise Time | tr |  | 1 | 2.2 | μs |  | 4 |
| Common Mode Rejection Ratio | CMRR | 38 |  |  | dB |  | 4 |
| Bandwidth | BW | 250 |  |  | kHz | -3dB | 4 |
| Reference Output Source Current | IZCR(SOURCE) |  |  | 400 | μA |  | 4 |
| Reference Output Sink Current | IZCR(SINK) |  |  | 3000 | μA |  | 4 |
| Nonlinearity | LinERR |  | 0.1 | 0.5 | % |  | 4 |
| Symmetry | SymERR |  | 0.5 | 1.5 | % |  | 4 |
| Power-on Time | TPOR |  | 10 |  | μs | Output rising from 0 to 90% of steady-state | 4 |
| Noise | VNOISE(P-P) |  | 35 |  | mV |  | 5 |
| Zero Current Output Slope | ΔVOUT(Q) |  | 0.34 |  | mV/℃ |  | 5 |
| Sensitivity Slope | ΔSENS |  | 0.02 |  | mV/A /℃ |  | 5 |
| Power Supply (recommended) | VCC | 4.5 |  | 5.5 | V |  | 4 |
| Input current (DC / AC RMS) | IP | -50 |  | 50 | A |  | 4 |
| Input voltage | VIN+, VIN- | -600 |  | 600 | VPK | relative to pin 5 (GND) | 4 |
| Operation Temperature | TA | -40 |  | 125 | °C |  | 4 |
| Power Supply | VCC |  |  | 7 | V |  | 3 |
| Output Voltage | VOUT | -0.3 |  |  | V | -0.3 to VCC+0.3 V | 3 |
| Output Source Current | IOUT(SOURCE) |  |  | 6 | mA |  | 3 |
| Output Sink Current | IOUT(SINK) |  |  | 30 | mA |  | 3 |
| Input peak current | IPEAK |  |  | 100 | A | 3 s | 3 |
| Input continuous current | ICON |  |  | 40 | A |  | 3 |
| Isolation Voltage | VISO |  |  | 3500 | VAC |  | 3 |
| Operating Ambient Temperature | Ta | -40 |  | 125 | °C |  | 3 |
| Junction Temperature | TJ |  |  | 165 | °C |  | 3 |
| Storage Temperature | TS | -55 |  | 150 | °C |  | 3 |
| Electrostatic Discharge Voltage (HBM) | ESD(HBM) |  |  | 4000 | V |  | 3 |

## Materials and finish

As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).

| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper |  | The typical resistance of the primary current input conductor at 25 ° C is 0.9 mΩ. The lead frame is made of copper. The temperature | 9 |

## CAD (KiCad official)

- Symbol: `CI5930-20A`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `ci5930-20a-etched.step` / `ci5930-20a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ci5930-20a.step` / `ci5930-20a.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Tokmas datasheet](docs/ci5930-20a-datasheet.pdf) (20 pp, sha256 `7ca334498208a40a`, retrieved 2026-10-24, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/ci5930-20a-datasheet.pdf)