component
CI5930-20A
Public Made by Adomby adom
Tokmas Current Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
CI5930-20A
Tokmas · Current Sensors · SOP-8
CI5930-20A from Tokmas, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Current sampled positive input, one of two pins (1-2) of the primary conductor with 0.9 mΩ typical resistance, rated 600 VPK relative to GND. |
| 2 | IP+ | passive | Current sampled positive input, one of two pins (1-2) of the primary conductor with 0.9 mΩ typical resistance, rated 600 VPK relative to GND. |
| 3 | IP- | passive | Current sampled negative input, one of two pins (3-4) of the primary conductor; current flowing from IP+ to IP- is positive. |
| 4 | IP- | passive | Current sampled negative input, one of two pins (3-4) of the primary conductor; current flowing from IP+ to IP- is positive. |
| 5 | GND | power_in | Ground reference for the signal side, isolated from pins 1-4 by 3500 VRMS. |
| 6 | VZCR | output | Zero current reference signal output of 2.500 V typical, with 400 µA max source and 3000 µA max sink current. |
| 7 | OUT | output | Analog voltage output equal to VCC/2 plus sensitivity times IP (400 mV/A for 5A to 40 mV/A for 50A parts), with load of at least 1.5 kΩ and at most 1 nF. |
| 8 | VCC | power_in | Power supply input, 4.5 V to 5.5 V recommended (7 V absolute maximum). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Tokmas |
| Package | SOP-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Sensitivity | Sens | 97 | 100 | 103 | mV/A | full range of IP | 5 |
| Zero Current Differential Output Error | VOE | -25 | 25 | mV | 5 | ||
| Total Output Error | ETOT | -3 | 3 | % | 5 | ||
| Current Accuracy Range | IP | -20 | 20 | A | 5 | ||
| Power Supply | VCC | 4.5 | 5.5 | V | Ta=25°C and VCC=5V | 4 | |
| Supply Current | ICC | 20 | 25 | mA | OUT pin floated | 4 | |
| Internal benchmark | VZCR | 2.47 | 2.5 | 2.53 | V | 4 | |
| Zero Current Output Voltage | VOUT(Q) | 2.49 | 2.5 | 2.51 | V | IP=0 | 4 |
| Output Capacitance Load | CL | 1 | nF | 4 | |||
| Output Resistive Load | RL | 1.5 | kΩ | 4 | |||
| Res. of Primary Conductor | RP | 0.9 | 1.2 | mΩ | IP=2A | 4 | |
| Propagation Time | tD | 1 | 2 | μs | 4 | ||
| Rise Time | tr | 1 | 2.2 | μs | 4 | ||
| Common Mode Rejection Ratio | CMRR | 38 | dB | 4 | |||
| Bandwidth | BW | 250 | kHz | -3dB | 4 | ||
| Reference Output Source Current | IZCR(SOURCE) | 400 | μA | 4 | |||
| Reference Output Sink Current | IZCR(SINK) | 3000 | μA | 4 | |||
| Nonlinearity | LinERR | 0.1 | 0.5 | % | 4 | ||
| Symmetry | SymERR | 0.5 | 1.5 | % | 4 | ||
| Power-on Time | TPOR | 10 | μs | Output rising from 0 to 90% of steady-state | 4 | ||
| Noise | VNOISE(P-P) | 35 | mV | 5 | |||
| Zero Current Output Slope | ΔVOUT(Q) | 0.34 | mV/℃ | 5 | |||
| Sensitivity Slope | ΔSENS | 0.02 | mV/A /℃ | 5 | |||
| Power Supply (recommended) | VCC | 4.5 | 5.5 | V | 4 | ||
| Input current (DC / AC RMS) | IP | -50 | 50 | A | 4 | ||
| Input voltage | VIN+, VIN- | -600 | 600 | VPK | relative to pin 5 (GND) | 4 | |
| Operation Temperature | TA | -40 | 125 | °C | 4 | ||
| Power Supply | VCC | 7 | V | 3 | |||
| Output Voltage | VOUT | -0.3 | V | -0.3 to VCC+0.3 V | 3 | ||
| Output Source Current | IOUT(SOURCE) | 6 | mA | 3 | |||
| Output Sink Current | IOUT(SINK) | 30 | mA | 3 | |||
| Input peak current | IPEAK | 100 | A | 3 s | 3 | ||
| Input continuous current | ICON | 40 | A | 3 | |||
| Isolation Voltage | VISO | 3500 | VAC | 3 | |||
| Operating Ambient Temperature | Ta | -40 | 125 | °C | 3 | ||
| Junction Temperature | TJ | 165 | °C | 3 | |||
| Storage Temperature | TS | -55 | 150 | °C | 3 | ||
| Electrostatic Discharge Voltage (HBM) | ESD(HBM) | 4000 | V | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | The typical resistance of the primary current input conductor at 25 ° C is 0.9 mΩ. The lead frame is made of copper. The temperature | 9 |
CAD (KiCad official)
- Symbol:
CI5930-20A - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ci5930-20a-etched.step/ci5930-20a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ci5930-20a.step/ci5930-20a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Tokmas datasheet (20 pp, sha256
7ca334498208a40a, retrieved 2026-10-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).