component

CDSOT23-SM712

Public Made by Adom

by adom

Bourns TVS Diodes, SOT-23. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componenttransistors/thyristorscdsot23-sm712board-derived

Verified CDSOT23-SM712

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 4 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Bourns' CDSOT23-SM712 datasheet (REV. 06/24); 3D model rebuilt to the package drawingfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: Bourns REV. 06/24 downloaded 2026-10-27 from bourns.com/docs/Product-Datasheets/CDSOT23-SM712.pdf; replaces the JLCPCB copy of REV. 01/18
  • ✓Pins: the datasheet names pins only by number; schematic (p.1) shows pins 1 and 2 each joined to common pin 3 through a TVS stack; names 1/2/3 kept, all passive; descriptions rewritten from the p.1 schematic and Electrical Characteristics table
  • •Footprint vs Product Dimensions and Recommended Footprint (p.2): KiCad SOT-23 pads 1.325 x 0.60 mm at 2.275 mm row spacing and 1.90 mm pitch (E 1.90 BSC); Bourns recommends 0.85 x 0.85 mm pads at 2.00 mm row spacing. The KiCad pads span 0.475-1.80 mm from centre and cover the leads (lead span D 2.10-2.49, foot K 0.40-0.58, lead width F 0.30-0.50); pin 1 top-left, pin 2 bottom-left, pin 3 right: the datasheet top view rotated 90 degrees, not mirrored
  • ✓DigiKey CDSOT23-SM712TR-ND (Bourns Inc., tape and reel, from the DigiKey search; the page had false with a wrong 'no exact-MPN listing' note, now replaced) and Mouser 652-CDSOT23-SM712 (kept)
  • ✓3D source: tier 1 none (Bourns links its 3D models from the bourns.com product page, which answers curl (browser headers) with a Cloudflare JavaScript challenge (HTTP 403 "Just a moment..."); guessed /docs/ model paths return the same challenge; a web search found no direct bourns.com STEP. No manufacturer STEP retrievable without solving the challenge (2026-10-27).) Tier 2 rejected (KiCad Package_TO_SOT_SMD.3dshapes/SOT-23-3.step (= SOT-23.step): lead span 2.50 x length 3.00 x height 1.20 mm; G 0.89-1.17 and D 2.10-2.49: height and lead span out of tolerance.) Tier 3: model rebuilt with the KiCad 3D model generator (gitlab.com/kicad/libraries/kicad-packages3D-generator, commit e272fcc8) from Bourns CDSOT23-SM712 datasheet REV. 06/24, Product Dimensions, p.2; parameters in provenance/3d-generator-params.yaml; Adom-authored, CC-BY-SA-4.0
  • ✓3D body vs drawing: body 2.90 x 1.30 mm at the parting line (1.20 at top and bottom, 8 deg draft): A 2.80-3.00, C 1.20-1.40: pass; lead span 2.40 mm: D 2.10-2.49: pass; overall height 1.03 mm (etched 1.035): G 0.89-1.17: pass; standoff 0.10: H 0.05-0.15: pass; feet 0.40 wide, 0.45 long, 0.14 thick: F 0.30-0.50, K 0.40-0.58, L 0.08-0.20: pass; leads at x -1.20..-0.84 (y +/-0.95) and x +0.84..+1.20 (y 0): on footprint pads 1, 2 (x -1.1375) and 3 (x +1.1375): pass; no pin-1 dot on the part (Bourns marking A2YWWL only): none modelled
  • ✓3D pose: cdsot23-sm712.step and cdsot23-sm712-etched.step are Z-up, seated on z = 0, centred on the footprint origin (offset 0.0 mm), footprint (model) binding identity (step_pose.py); the source was built in the footprint frame, so the transform is identity; the etched file adds the adom-chip-laser MPN inlay on the top face; GLBs from step2glb convert; footprint (model) path now ${KIPRJMOD}/cdsot23-sm712.step with only that line changed (pads untouched); provenance/3d-model.json records source, terms, hashes, transform and checks
  • •Datasheet conflict: the Product Dimensions table prints H (standoff) as '0.05 - 0.015' mm while the inch column gives 0.002-0.006 in (0.05-0.15 mm); 0.05-0.15 mm used
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (Bourns)
Verified files✓ cdsot23-sm712.kicad_sym✓ cdsot23-sm712.kicad_mod✓ cdsot23-sm712.step
16 Oct 2026Claude (AI build)Related wiki pages exist for different orderable numbers (adom/cdsot23-sm712-es, adom/tpcd...superseded
reviewfor all variants
  • •Related wiki pages exist for different orderable numbers (adom/cdsot23-sm712-es, adom/tpcdsot23-sm712); this page is the plain CDSOT23-SM712.
16 Oct 2026Claude (AI build)The datasheet names pins only by number (Pin 1, 2, 3); the board symbol names (TVS1, TVS2,...superseded
reviewfor all variants
  • •The datasheet names pins only by number (Pin 1, 2, 3); the board symbol names (TVS1, TVS2, TVS2) are replaced by the numbers. Pin 3 is the common node of both TVS stacks.
16 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓3 of 3 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! cdsot23-sm712.kicad_sym! cdsot23-sm712.kicad_mod! cdsot23-sm712.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
cdsot23-sm712 / cdsot23-sm712.lbr
HistoryDownload
Caleb Publish 0.1.1 311a885 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="9.6.2">
<drawing>
<settings><setting alwaysvectorfont="no"/></settings>
<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
<layers>
<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>
<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>
<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>
<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>
<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>
<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>
<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>
<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>
<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>
<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>
<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>
<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>
<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>
<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>
<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>
<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>
<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>
<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>
<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>
<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>
</layers>
<library>
<description>-55℃~+150℃ 14V、26V 1uA、20uA 2 400W 7.5V、13.3V 75pF 7V、12V ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23 ESD and Surge Protection (TVS/ESD) ROHS</description>
<packages>
<package name="CDSOT23-SM712">
  <description>3 pads, 3.6 x 2.5 mm. SOT, 3 Pin</description>
  <smd name="1" x="-1.1375" y="0.9500" dx="1.3250" dy="0.6000" layer="1" roundness="50"/>
  <smd name="2" x="-1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1" roundness="50"/>
  <smd name="3" x="1.1375" y="-0.0000" dx="1.3250" dy="0.6000" layer="1" roundness="50"/>
  <polygon width="0.1200" layer="21">
    <vertex x="-1.4500" y="0.3800"/>
    <vertex x="-1.2100" y="0.0500"/>
    <vertex x="-1.6900" y="0.0500"/>
  </polygon>
  <polygon width="0.1000" layer="51">
    <vertex x="-0.4000" y="1.4500"/>
    <vertex x="0.8000" y="1.4500"/>
    <vertex x="0.8000" y="-1.4500"/>
    <vertex x="-0.8000" y="-1.4500"/>
    <vertex x="-0.8000" y="1.0500"/>
  </polygon>
  <wire x1="-0.9100" y1="1.5600" x2="0.9100" y2="1.5600" width="0.1200" layer="21"/>
  <wire x1="-0.9100" y1="1.5100" x2="-0.9100" y2="1.5600" width="0.1200" layer="21"/>
  <wire x1="-0.9100" y1="-0.3900" x2="-0.9100" y2="0.3900" width="0.1200" layer="21"/>
  <wire x1="-0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5100" width="0.1200" layer="21"/>
  <wire x1="0.9100" y1="1.5600" x2="0.9100" y2="0.5600" width="0.1200" layer="21"/>
  <wire x1="0.9100" y1="-0.5600" x2="0.9100" y2="-1.5600" width="0.1200" layer="21"/>
  <wire x1="0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5600" width="0.1200" layer="21"/>
  <text x="0" y="2.212" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>
  <text x="0" y="-2.212" size="1.27" layer="27" align="top-center">&gt;VALUE</text>
</package>
</packages>
<symbols>
<symbol name="CDSOT23-SM712">
  <description>-55℃~+150℃ 14V、26V 1uA、20uA 2 400W 7.5V、13.3V 75pF 7V、12V ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23 ESD and Surge Protection (TVS/ESD) ROHS</description>
  <wire x1="-3.81" y1="3.175" x2="3.81" y2="3.175" width="0.254" layer="94"/>
  <wire x1="3.81" y1="3.175" x2="3.81" y2="-3.175" width="0.254" layer="94"/>
  <wire x1="3.81" y1="-3.175" x2="-3.81" y2="-3.175" width="0.254" layer="94"/>
  <wire x1="-3.81" y1="-3.175" x2="-3.81" y2="3.175" width="0.254" layer="94"/>
  <circle x="2.5400" y="1.2700" radius="0.2540" width="0.1524" layer="94"/>
  <circle x="2.5400" y="-1.2700" radius="0.2540" width="0.1524" layer="94"/>
  <wire x1="-5.0800" y1="1.2700" x2="-2.5400" y2="1.2700" width="0.1524" layer="94"/>
  <wire x1="-5.0800" y1="-1.2700" x2="-2.5400" y2="-1.2700" width="0.1524" layer="94"/>
  <wire x1="-2.5400" y1="1.2700" x2="1.2700" y2="1.2700" width="0.1524" layer="94"/>
  <wire x1="-2.5400" y1="1.2700" x2="-1.2700" y2="1.9050" width="0.1524" layer="94"/>
  <wire x1="-1.2700" y1="1.9050" x2="-1.2700" y2="0.6350" width="0.1524" layer="94"/>
  <wire x1="-1.2700" y1="0.6350" x2="-2.5400" y2="1.2700" width="0.1524" layer="94"/>
  <wire x1="-2.5400" y1="0.6350" x2="-2.5400" y2="1.9050" width="0.1524" layer="94"/>
  <wire x1="-2.5400" y1="1.9050" x2="-2.2860" y2="1.9050" width="0.1524" layer="94"/>
  <wire x1="-2.5400" y1="-1.2700" x2="1.2700" y2="-1.2700" width="0.1524" layer="94"/>
  <wire x1="-2.5400" y1="-1.2700" x2="-1.2700" y2="-0.6350" width="0.1524" layer="94"/>
  <wire x1="-1.2700" y1="-0.6350" x2="-1.2700" y2="-1.9050" width="0.1524" layer="94"/>
  <wire x1="-1.2700" y1="-1.9050" x2="-2.5400" y2="-1.2700" width="0.1524" layer="94"/>
  <wire x1="-2.5400" y1="-1.9050" x2="-2.5400" y2="-0.6350" width="0.1524" layer="94"/>
  <wire x1="-2.5400" y1="-0.6350" x2="-2.2860" y2="-0.6350" width="0.1524" layer="94"/>
  <wire x1="1.0160" y1="0.6350" x2="1.2700" y2="0.6350" width="0.1524" layer="94"/>
  <wire x1="1.2700" y1="0.6350" x2="1.2700" y2="1.9050" width="0.1524" layer="94"/>
  <wire x1="1.0160" y1="-1.9050" x2="1.2700" y2="-1.9050" width="0.1524" layer="94"/>
  <wire x1="1.2700" y1="-1.9050" x2="1.2700" y2="-0.6350" width="0.1524" layer="94"/>
  <wire x1="1.2700" y1="1.2700" x2="0.0000" y2="0.6350" width="0.1524" layer="94"/>
  <wire x1="0.0000" y1="0.6350" x2="0.0000" y2="1.9050" width="0.1524" layer="94"/>
  <wire x1="0.0000" y1="1.9050" x2="1.2700" y2="1.2700" width="0.1524" layer="94"/>
  <wire x1="1.2700" y1="-1.2700" x2="0.0000" y2="-1.9050" width="0.1524" layer="94"/>
  <wire x1="0.0000" y1="-1.9050" x2="0.0000" y2="-0.6350" width="0.1524" layer="94"/>
  <wire x1="0.0000" y1="-0.6350" x2="1.2700" y2="-1.2700" width="0.1524" layer="94"/>
  <wire x1="2.5400" y1="1.2700" x2="1.2700" y2="1.2700" width="0.1524" layer="94"/>
  <wire x1="2.5400" y1="0.0000" x2="5.0800" y2="0.0000" width="0.1524" layer="94"/>
  <wire x1="2.5400" y1="-1.2700" x2="1.2700" y2="-1.2700" width="0.1524" layer="94"/>
  <wire x1="2.5400" y1="-1.2700" x2="2.5400" y2="1.2700" width="0.1524" layer="94"/>
  <text x="2.5400" y="6.9850" size="1.27" layer="95" align="center">&gt;NAME</text>
  <text x="-10.1600" y="4.4450" size="1.27" layer="96" align="center">&gt;VALUE</text>
  <pin name="1" x="-6.35" y="1.27" length="short" direction="pas"/>
  <pin name="2" x="-6.35" y="-1.27" length="short" direction="pas"/>
  <pin name="3" x="6.35" y="0" length="short" direction="pas" rot="R180"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="CDSOT23-SM712" prefix="D">
  <description>-55℃~+150℃ 14V、26V 1uA、20uA 2 400W 7.5V、13.3V 75pF 7V、12V ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23 ESD and Surge Protection (TVS/ESD) ROHS</description>
  <gates>
    <gate name="G$1" symbol="CDSOT23-SM712" x="0" y="0"/>
  </gates>
  <devices>
    <device name="" package="CDSOT23-SM712">
      <connects>
        <connect gate="G$1" pin="1" pad="1"/>
        <connect gate="G$1" pin="2" pad="2"/>
        <connect gate="G$1" pin="3" pad="3"/>
      </connects>
      <technologies>
        <technology name="">
          <attribute name="MPN" value="CDSOT23-SM712" constant="no"/>
          <attribute name="MANUFACTURER" value="Bourns" constant="no"/>
          <attribute name="DATASHEET" value="https://www.bourns.com/docs/Product-Datasheets/CDSOT23-SM712.pdf" constant="no"/>
          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/cdsot23-sm712" constant="no"/>
          <attribute name="MOUSER_PN" value="652-CDSOT23-SM712" constant="no"/>
          <attribute name="DIGIKEY_PN" value="CDSOT23-SM712TR-ND" constant="no"/>
          <attribute name="LCSC_PN" value="C404012" constant="no"/>
        </technology>
      </technologies>
    </device>
  </devices>
</deviceset>
</devicesets>
</library>
</drawing>
</eagle>