component
CDCVF2505PWR
Public Made by Adomby adom
Texas Instruments Clock Buffers, Drivers, Distributors, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownCDCVF2505PWR
Texas Instruments · Clock Buffers, Drivers, Distributors · TSSOP-8
CDCVF2505PWR from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLKIN | input | Clock input providing the reference to the integrated PLL; it must have fixed frequency and fixed phase, and a 100 µs stabilization time is required for phase lock after power-up with a valid signal. |
| 2 | 1Y1 | output | Clock output that is a low-skew copy of CLKIN with an integrated 25-Ω series damping resistor. |
| 3 | 1Y0 | output | Clock output that is a low-skew copy of CLKIN with an integrated 25-Ω series damping resistor. |
| 4 | GND | power_in | Ground. |
| 5 | 1Y2 | output | Clock output that is a low-skew copy of CLKIN with an integrated 25-Ω series damping resistor. |
| 6 | VDD3.3V | power_in | 3.3-V supply, recommended range 3 V to 3.6 V, with at least 100 nF local decoupling capacitor. |
| 7 | 1Y3 | output | Clock output that is a low-skew copy of CLKIN with an integrated 25-Ω series damping resistor. |
| 8 | CLKOUT | output | Feedback output that completes the internal PLL feedback loop; do not connect an external feedback loop, and it can be loaded with a capacitor to tune delay between CLKIN and the Y outputs. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-8 |
| Category | Clock/Timing |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
CDCVF2505PWR - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
cdcvf2505pwr-etched.step/cdcvf2505pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cdcvf2505pwr.step/cdcvf2505pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
cb7590012710844f, retrieved 2026-10-03, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).