CD74HCT4046AE

{
  "slug": "cd74hct4046ae",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Clock Generators / Frequency Synthesizers / PLL, PDIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "clock and timing",
    "cd74hct4046ae",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "cd74hct4046ae.kicad_sym",
    "cd74hct4046ae.kicad_mod",
    "cd74hct4046ae.glb",
    "cd74hct4046ae.step",
    "cd74hct4046ae.lbr",
    "docs/hero.png",
    "docs/cd74hct4046ae-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "cd74hct4046ae-hero.glb",
    "cd74hct4046ae-hero.overlay.json",
    "cd74hct4046ae-etched.glb"
  ],
  "component": {
    "mpn": "CD74HCT4046AE",
    "manufacturer": "Texas Instruments",
    "package": "PDIP-16",
    "pin_count": 16,
    "category": "Clock and Timing",
    "subcategory": "Clock Generators / Frequency Synthesizers / PLL",
    "datasheet": "https://www.ti.com/lit/ds/symlink/cd74hct4046ae.pdf",
    "parts": {
      "symbol": "cd74hct4046ae.kicad_sym",
      "footprint": "cd74hct4046ae.kicad_mod",
      "model_3d": "cd74hct4046ae-hero.glb",
      "model_3d_plain": "cd74hct4046ae-etched.glb",
      "model_3d_step": "cd74hct4046ae-etched.step",
      "model_3d_step_plain": "cd74hct4046ae.step",
      "lbr": "cd74hct4046ae.lbr"
    },
    "distributor_links": {
      "lcsc": "C1535722",
      "digikey": "2156-CD74HCT4046AE-ND",
      "mouser": "595-CD74HCT4046AE"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T21:04:26Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2156-CD74HCT4046AE-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-CD74HCT4046AE",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PCPOUT",
        "type": "output",
        "description": "Phase comparator pulse output; the provided pages give no electrical limits for this pin."
      },
      {
        "number": "2",
        "name": "PC1OUT",
        "type": "output",
        "description": "Phase comparator 1 output; PC1 is an Exclusive-OR network whose averaged output is fed to the VCO input through the low-pass filter."
      },
      {
        "number": "3",
        "name": "COMPIN",
        "type": "input",
        "description": "Comparator input, which receives the VCO output either directly or through a frequency divider."
      },
      {
        "number": "4",
        "name": "VCOOUT",
        "type": "output",
        "description": "VCO output with a specified duty factor of 50%, connectable directly to COMPIN or through a frequency divider."
      },
      {
        "number": "5",
        "name": "INH",
        "type": "input",
        "description": "Inhibit input: a LOW level enables the VCO and demodulator, while a HIGH level turns both off to minimize standby power consumption."
      },
      {
        "number": "6",
        "name": "C1A",
        "type": "passive",
        "description": "Connection A of external capacitor C1, which together with R1 determines the VCO frequency range."
      },
      {
        "number": "7",
        "name": "C1B",
        "type": "passive",
        "description": "Connection B of external capacitor C1, connected between C1A and C1B."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground (0 V) return for the device and for external resistor R1, R2 and the DEMOUT load resistor RS."
      },
      {
        "number": "9",
        "name": "VCOIN",
        "type": "input",
        "description": "VCO input with high input impedance, which simplifies low-pass filter design."
      },
      {
        "number": "10",
        "name": "DEMOUT",
        "type": "output",
        "description": "Demodulator output equal to the VCO input voltage; a load resistor RS to GND should be connected if used, otherwise it should be left open."
      },
      {
        "number": "11",
        "name": "R1",
        "type": "passive",
        "description": "Connection for external resistor R1 to GND, which together with C1 determines the VCO frequency range."
      },
      {
        "number": "12",
        "name": "R2",
        "type": "passive",
        "description": "Connection for external resistor R2 to GND, which enables a VCO frequency offset if required."
      },
      {
        "number": "13",
        "name": "PC2OUT",
        "type": "output",
        "description": "Phase comparator 2 output; with no signal at SIGIN the PC2 loop adjusts the VCO to fMIN with VVCOIN = 0 V."
      },
      {
        "number": "14",
        "name": "SIGIN",
        "type": "input",
        "description": "Self-biased signal input that can be directly coupled for signals within HC family logic levels, while smaller swings require capacitive coupling."
      },
      {
        "number": "15",
        "name": "PC3OUT",
        "type": "output",
        "description": "Phase comparator 3 output; with no signal at SIGIN the PC3 loop adjusts the VCO to fMAX with VVCOIN = VCC."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply: 4.5 V to 5.5 V operation for HCT types, with the VCO section specified at 3 V to 6 V and the digital section at 2 V to 6 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet does not assign electrical pin classes; these external RC connection pins were typed a; The provided pages name PCPOUT (Phase Comparator Pulse Output) but do not describe its function or l; The datasheet describes PC2 and PC3 behavior mainly via loop conditions on page 20; the descriptions",
          "2/16 pins cited to the wrong page (name found elsewhere): ['13:PC2OUT@p20', '15:PC3OUT@p20']"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0487,
        "at": "2026-10-28T21:04:05"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/cd74hct4046ae.pdf",
        "pages": 38,
        "sha256": "13b9d2164822f9f0",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "cd74hct4046ae.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          19.177,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "17a30b1f0ab3fd5384a1231e3c63c394888d5b952c542a8c189e023ed3467464",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "cd74hct4046ae-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          19.177,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c5a4828fe5b9944b9d6b404d29b2470c0fd2d0a8233b8afc2b5c9d2dbb4b9cbc",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}