CC3200R1M2RGC

{
  "schema_version": 1,
  "type": "component",
  "slug": "cc3200r1m2rgc",
  "title": "CC3200R1M2RGC",
  "brief": "Texas Instruments RF Transceiver ICs, VQFN-64-EP(9x9). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "rf and wireless",
    "cc3200r1m2rgc",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "CC3200R1M2RGC",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-64-EP(9x9)",
    "pin_count": 65,
    "category": "RF And Wireless",
    "subcategory": "RF Transceiver ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/cc3200",
    "parts": {
      "symbol": "cc3200r1m2rgc.kicad_sym",
      "footprint": "cc3200r1m2rgc.kicad_mod",
      "model_3d": "cc3200r1m2rgc-hero.glb",
      "model_3d_plain": "cc3200r1m2rgc.glb",
      "model_3d_step": "cc3200r1m2rgc-etched.step",
      "model_3d_step_plain": "cc3200r1m2rgc.step",
      "lbr": "cc3200r1m2rgc.lbr"
    },
    "distributor_links": {
      "lcsc": "C1526162",
      "digikey": "296-38012-ND",
      "mouser": "595-CC3200R1M2RGC"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T20:48:49Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-38012-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-CC3200R1M2RGC",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GPIO10",
        "type": "bidirectional",
        "description": "Multiplexed GPIO10 digital I/O (alternates include UART1_TX, SDCARD_CLK, GT_PWM06); non-fail-safe, with 2/4/6 mA configurable drive and 10 µA pull options."
      },
      {
        "number": "2",
        "name": "GPIO11",
        "type": "bidirectional",
        "description": "Multiplexed GPIO11 digital I/O (alternates include pXCLK/XVCLK, SDCARD_CMD, UART1_RX, McAFSX); non-fail-safe, with 2/4/6 mA configurable drive."
      },
      {
        "number": "3",
        "name": "GPIO12",
        "type": "bidirectional",
        "description": "Multiplexed GPIO12 digital I/O (alternates include pVS/VSYNC, I2C_SCL, UART0_TX, GT_CCP03); non-fail-safe, with 2/4/6 mA configurable drive."
      },
      {
        "number": "4",
        "name": "GPIO13",
        "type": "bidirectional",
        "description": "Multiplexed GPIO13 digital I/O (alternates include pHS/HSYNC, I2C_SDA, UART0_RX, GT_CCP04); non-fail-safe, with 2/4/6 mA configurable drive."
      },
      {
        "number": "5",
        "name": "GPIO14",
        "type": "bidirectional",
        "description": "Multiplexed GPIO14 digital I/O (alternates include GSPI_CLK, pDATA8/CAM_D4, I2C_SCL, GT_CCP05); non-fail-safe, with 2/4/6 mA configurable drive."
      },
      {
        "number": "6",
        "name": "GPIO15",
        "type": "bidirectional",
        "description": "Multiplexed GPIO15 digital I/O (alternates include GSPI_MISO, pDATA9/CAM_D5, I2C_SDA, GT_CCP06); non-fail-safe, with 2/4/6 mA configurable drive."
      },
      {
        "number": "7",
        "name": "GPIO16",
        "type": "bidirectional",
        "description": "Multiplexed GPIO16 digital I/O (alternates include GSPI_MOSI, pDATA10/CAM_D6, UART1_TX, GT_CCP07); non-fail-safe, with 2/4/6 mA configurable drive."
      },
      {
        "number": "8",
        "name": "GPIO17",
        "type": "bidirectional",
        "description": "Multiplexed GPIO17 digital I/O (alternates include GSPI_CS, pDATA11/CAM_D7, UART1_RX); non-fail-safe, with 2/4/6 mA configurable drive."
      },
      {
        "number": "9",
        "name": "VDD_DIG1",
        "type": "power_out",
        "description": "Internal digital core voltage rail (VDD_DIG1); an internal node generated on the chip, not an external supply input."
      },
      {
        "number": "10",
        "name": "VIN_IO1",
        "type": "power_in",
        "description": "Digital I/O supply input tied to VBAT; VIO and VBAT must be tied together at all times, with 2.1 to 3.6 V (direct battery) or 1.76 to 1.9 V (preregulated 1.85 V) recommended."
      },
      {
        "number": "11",
        "name": "FLASH_SPI_CLK",
        "type": "output",
        "description": "Fixed-function clock output to the external SPI serial flash; TI recommends enabling internal weak pulldowns during LPDS to minimize flash leakage."
      },
      {
        "number": "12",
        "name": "FLASH_SPI_DOUT",
        "type": "output",
        "description": "Fixed-function data output to the external SPI serial flash."
      },
      {
        "number": "13",
        "name": "FLASH_SPI_DIN",
        "type": "input",
        "description": "Fixed-function data input from the external SPI serial flash."
      },
      {
        "number": "14",
        "name": "FLASH_SPI_CS",
        "type": "output",
        "description": "Fixed-function chip-select output to the external SPI serial flash."
      },
      {
        "number": "15",
        "name": "GPIO22",
        "type": "bidirectional",
        "description": "Multiplexed GPIO22 digital I/O (alternates include McAFSX, GT_CCP04); non-fail-safe, with 2/4/6 mA configurable drive."
      },
      {
        "number": "16",
        "name": "TDI",
        "type": "bidirectional",
        "description": "JTAG TDI input in the default pinout after reset, also multiplexed as GPIO23 or UART1_TX; non-fail-safe digital I/O."
      },
      {
        "number": "17",
        "name": "TDO",
        "type": "bidirectional",
        "description": "JTAG TDO output in the default pinout after reset, also multiplexed as GPIO24 or PWM0; non-fail-safe digital I/O."
      },
      {
        "number": "18",
        "name": "GPIO28",
        "type": "bidirectional",
        "description": "General-purpose I/O GPIO28 (also GT_PWM03 and the TCK alternate function); non-fail-safe digital I/O."
      },
      {
        "number": "19",
        "name": "JTAG/SWD TCK",
        "type": "bidirectional",
        "description": "JTAG/SWD clock input in the default pinout after reset, also multiplexed as GPIO28 or GT_PWM03; non-fail-safe digital I/O."
      },
      {
        "number": "20",
        "name": "TMS",
        "type": "bidirectional",
        "description": "JTAG/SWD TMS input in the default pinout after reset, also multiplexed as GPIO29; non-fail-safe digital I/O."
      },
      {
        "number": "21",
        "name": "GPIO25 / SOP2 / TCXO_EN",
        "type": "output",
        "description": "Output-only pin used as SOP[2] sense-on-power (2.7 kΩ pull recommended) and as optional external TCXO enable; TI recommends output-only use to avoid spurious SOP sensing."
      },
      {
        "number": "22",
        "name": "WLAN_XTAL_N",
        "type": "passive",
        "description": "Negative terminal of the 40-MHz crystal; connect to GND when an external 40-MHz TCXO/XO is used on pin 23."
      },
      {
        "number": "23",
        "name": "WLAN_XTAL_P",
        "type": "passive",
        "description": "Positive terminal of the 40-MHz crystal, or the external TCXO/XO clock input (40.00 MHz, 0.7 to 1.2 Vpp sine or clipped sine, AC coupled)."
      },
      {
        "number": "24",
        "name": "VDD_PLL",
        "type": "power_out",
        "description": "Internal analog voltage rail (VDD_PLL); an internal node, not an external supply input."
      },
      {
        "number": "25",
        "name": "LDO_IN2",
        "type": "power_in",
        "description": "Supply input to the analog RF LDO 2, fed from the ANA DC-DC output."
      },
      {
        "number": "26",
        "name": "NC",
        "type": "unconnected",
        "description": "Reserved WLAN analog pin; must be left as no connect."
      },
      {
        "number": "27",
        "name": "NC",
        "type": "unconnected",
        "description": "Reserved WLAN analog pin; must be left as no connect."
      },
      {
        "number": "28",
        "name": "NC",
        "type": "unconnected",
        "description": "Reserved WLAN analog pin; must be left as no connect."
      },
      {
        "number": "29",
        "name": "ANTSEL1",
        "type": "output",
        "description": "WLAN antenna-select control output for an external RF switch; reserved for this function, not recommended for other use, with 4 mA maximum effective drive."
      },
      {
        "number": "30",
        "name": "ANTSEL2",
        "type": "output",
        "description": "WLAN antenna-select control output for an external RF switch; reserved for this function, not recommended for other use, with 4 mA maximum effective drive."
      },
      {
        "number": "31",
        "name": "RF_BG",
        "type": "passive",
        "description": "RF pin for the 2.4-GHz (BG band) WLAN radio; RF pins are rated -0.5 to 2.1 V."
      },
      {
        "number": "32",
        "name": "nRESET",
        "type": "input",
        "description": "Active-low master chip reset; must be held low until the VBAT supply is driven and stable, with a simple RC (100 kΩ || 0.1 µF, RC ≈ 10 ms) recommended during power-up."
      },
      {
        "number": "33",
        "name": "VDD_PA_IN",
        "type": "power_out",
        "description": "Internal PA supply voltage from the PA DC-DC output; an internal rail, not an external supply input."
      },
      {
        "number": "34",
        "name": "SOP1",
        "type": "input",
        "description": "Sense-on-power input sampled at power-up to select the boot mode; a 100 kΩ pull resistor is recommended and the pin is not available for other functions."
      },
      {
        "number": "35",
        "name": "SOP0",
        "type": "input",
        "description": "Sense-on-power input sampled at power-up to select the boot mode; a 100 kΩ pull resistor is recommended and the pin is not available for other functions."
      },
      {
        "number": "36",
        "name": "LDO_IN1",
        "type": "power_in",
        "description": "Supply input to the analog RF LDO 1, fed from the ANA DC-DC output."
      },
      {
        "number": "37",
        "name": "VIN_DCDC_ANA",
        "type": "power_in",
        "description": "Analog DC-DC input connected to the chip input supply VBAT; 2.1 to 3.6 V recommended, absolute maximum 3.8 V."
      },
      {
        "number": "38",
        "name": "DCDC_ANA_SW",
        "type": "output",
        "description": "Switching node of the analog DC-DC converter."
      },
      {
        "number": "39",
        "name": "VIN_DCDC_PA",
        "type": "power_in",
        "description": "PA DC-DC input connected to the chip input supply VBAT; 2.1 to 3.6 V in wide-voltage mode."
      },
      {
        "number": "40",
        "name": "DCDC_PA_SW_P",
        "type": "output",
        "description": "Positive switching node of the PA DC-DC converter."
      },
      {
        "number": "41",
        "name": "DCDC_PA_SW_N",
        "type": "output",
        "description": "Negative switching node of the PA DC-DC converter."
      },
      {
        "number": "42",
        "name": "DCDC_PA_OUT",
        "type": "power_out",
        "description": "Output of the PA buck converter."
      },
      {
        "number": "43",
        "name": "DCDC_DIG_SW",
        "type": "output",
        "description": "Switching node of the digital DC-DC converter."
      },
      {
        "number": "44",
        "name": "VIN_DCDC_DIG",
        "type": "power_in",
        "description": "Digital DC-DC input connected to the chip input supply VBAT; 2.1 to 3.6 V in wide-voltage mode or 1.85 V preregulated."
      },
      {
        "number": "45",
        "name": "DCDC_ANA2_SW_P / GPIO31",
        "type": "bidirectional",
        "description": "ANA2 DC-DC positive switching node or GPIO31 digital I/O (alternates include UART0_RX, UART1_RX, McAXR0, GSPI_CLK); for digital use, pin 47 must be shorted to the supply input on CC3200R devices."
      },
      {
        "number": "46",
        "name": "DCDC_ANA2_SW_N",
        "type": "output",
        "description": "Negative switching node of the ANA2 DC-DC converter."
      },
      {
        "number": "47",
        "name": "VDD_ANA2",
        "type": "power_out",
        "description": "ANA2 DC-DC output; must be shorted to the supply input rail on CC3200R devices, otherwise the pin is driven by the ANA2 DC-DC."
      },
      {
        "number": "48",
        "name": "VDD_ANA1",
        "type": "power_out",
        "description": "Analog supply rail fed by the ANA2 DC-DC output."
      },
      {
        "number": "49",
        "name": "VDD_RAM",
        "type": "power_out",
        "description": "Output of the internal SRAM LDO."
      },
      {
        "number": "50",
        "name": "GPIO0",
        "type": "bidirectional",
        "description": "Multiplexed GPIO0 generic digital I/O (alternates include UART0_CTS, UART1_RTS, UART0_RTS, McAXR0, GSPI_CS), with 4 mA maximum effective drive."
      },
      {
        "number": "51",
        "name": "RTC_XTAL_P",
        "type": "passive",
        "description": "Positive terminal of the 32.768-kHz RTC crystal (±150 ppm), or input for an external CMOS-level RTC clock."
      },
      {
        "number": "52",
        "name": "RTC_XTAL_N / GPIO32",
        "type": "passive",
        "description": "Negative terminal of the 32.768-kHz RTC crystal; when used as GPIO32 it is output-only and needs an external 100 kΩ pull-up to the supply rail."
      },
      {
        "number": "53",
        "name": "GPIO30",
        "type": "bidirectional",
        "description": "Multiplexed GPIO30 generic digital I/O (alternates include McACLK, McAFSX, GSPI_MISO, UART0_TX, GT_CCP05), with 4 mA maximum effective drive."
      },
      {
        "number": "54",
        "name": "VIN_IO2",
        "type": "power_in",
        "description": "Digital I/O supply input tied to VBAT; VIO and VBAT must be tied together at all times."
      },
      {
        "number": "55",
        "name": "GPIO1",
        "type": "bidirectional",
        "description": "Multiplexed GPIO1 digital I/O (alternates include pCLK/PIXCLK, UART0_TX, UART1_TX, GT_CCP01); non-fail-safe."
      },
      {
        "number": "56",
        "name": "VDD_DIG2",
        "type": "power_out",
        "description": "Internal digital core voltage rail (VDD_DIG2); an internal node, not an external supply input."
      },
      {
        "number": "57",
        "name": "GPIO2 / ADC_CH0",
        "type": "bidirectional",
        "description": "Shared ADC channel 0 analog input and digital I/O; ADC inputs are tolerant only to 1.8 V, so the digital output must be set Hi-Z before the ADC switch (off by default) is enabled."
      },
      {
        "number": "58",
        "name": "GPIO3 / ADC_CH1",
        "type": "bidirectional",
        "description": "Shared ADC channel 1 analog input and digital I/O; ADC inputs are tolerant only to 1.8 V, so the digital output must be set Hi-Z before the ADC switch (off by default) is enabled."
      },
      {
        "number": "59",
        "name": "GPIO4 / ADC_CH2",
        "type": "bidirectional",
        "description": "Shared ADC channel 2 analog input and digital I/O; ADC inputs are tolerant only to 1.8 V, so the digital output must be set Hi-Z before the ADC switch (off by default) is enabled."
      },
      {
        "number": "60",
        "name": "GPIO5 / ADC_CH3",
        "type": "bidirectional",
        "description": "Shared ADC channel 3 analog input and digital I/O; ADC inputs are tolerant only to 1.8 V, so the digital output must be set Hi-Z before the ADC switch (off by default) is enabled."
      },
      {
        "number": "61",
        "name": "GPIO6",
        "type": "bidirectional",
        "description": "Multiplexed GPIO6 digital I/O (alternates include pDATA4/CAM_D0, UART0_RTS, UART0_CTS, UART1_CTS); non-fail-safe."
      },
      {
        "number": "62",
        "name": "GPIO7",
        "type": "bidirectional",
        "description": "Multiplexed GPIO7 digital I/O (alternates include McACLKX, UART1_RTS, UART0_RTS, UART0_TX); non-fail-safe."
      },
      {
        "number": "63",
        "name": "GPIO8",
        "type": "bidirectional",
        "description": "Multiplexed GPIO8 digital I/O (alternates include SDCARD_IRQ, McAFSX, GT_CCP06); non-fail-safe."
      },
      {
        "number": "64",
        "name": "GPIO9",
        "type": "bidirectional",
        "description": "Multiplexed GPIO9 digital I/O (alternates include SDCARD_DATA, McAXR0, GT_PWM05, GT_CCP00); non-fail-safe."
      },
      {
        "number": "65",
        "name": "GND_TAB",
        "type": "power_in",
        "description": "Thermal pad and electrical ground for the device."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives no KiCad electrical type for internal supply/regulator nodes. I typed them power; Pins are multiplexed (GPIO, JTAG/SWD, ADC, camera, SPI-flash). I typed each as bidirectional because; Pins 51 and 52 are 32.768-kHz RTC crystal pins, and 22 and 23 are 40-MHz crystal/TCXO pins. I typed ",
          "13/65 pins cited to the wrong page (name found elsewhere): ['11:FLASH_SPI_CLK@p10', '12:FLASH_SPI_DOUT@p11', '13:FLASH_SPI_DIN@p11', '14:FLASH_SPI_CS@p11']"
        ],
        "pages_sent": 72,
        "cost_usd": 0.157,
        "at": "2026-10-08T20:48:11"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/cc3200",
        "pages": 72,
        "sha256": "0376162748d5b86d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 65,
        "described": 65,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "cc3200r1m2rgc.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9,
          9,
          0.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "dce07a86ec3fe3ca87eebdff13827f55e036ced5518fee01f85cec4a3f56366d",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "cc3200r1m2rgc-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9,
          9,
          0.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "5dcc349454a96283a891134eb88bf084634dd7c895b8f92895abb8209243deca",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "VQFN-64-EP(9x9)",
      "Category": "RF And Wireless",
      "Pins": "65"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "cc3200r1m2rgc"
  ],
  "discovery_pitch": "CC3200R1M2RGC (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "cc3200r1m2rgc.kicad_sym",
    "cc3200r1m2rgc.kicad_mod",
    "cc3200r1m2rgc.glb",
    "cc3200r1m2rgc.step",
    "cc3200r1m2rgc.lbr",
    "docs/hero.png",
    "docs/cc3200r1m2rgc-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "cc3200r1m2rgc-hero.glb",
    "cc3200r1m2rgc-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}