CBM706SAS8

{
  "slug": "cbm706sas8",
  "version": "0.1.0",
  "type": "component",
  "description": "Corebai Microelectronics Supervisor And Reset ICs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "cbm706sas8",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "cbm706sas8.kicad_sym",
    "cbm706sas8.kicad_mod",
    "cbm706sas8.glb",
    "cbm706sas8.step",
    "cbm706sas8.lbr",
    "docs/hero.png",
    "docs/cbm706sas8-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "cbm706sas8-hero.glb",
    "cbm706sas8-hero.overlay.json",
    "cbm706sas8-etched.glb"
  ],
  "component": {
    "mpn": "CBM706SAS8",
    "manufacturer": "Corebai Microelectronics",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884914644770816",
    "parts": {
      "symbol": "cbm706sas8.kicad_sym",
      "footprint": "cbm706sas8.kicad_mod",
      "model_3d": "cbm706sas8-hero.glb",
      "model_3d_plain": "cbm706sas8-etched.glb",
      "model_3d_step": "cbm706sas8-etched.step",
      "model_3d_step_plain": "cbm706sas8.step",
      "lbr": "cbm706sas8.lbr"
    },
    "distributor_links": {
      "lcsc": "C476238"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T21:58:44Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "MR",
        "type": "input",
        "description": "Active-low manual reset input that generates a reset when taken below 0.6 V, can be driven from TTL/CMOS logic or a manual switch, and has an internal 70 µA pull-up that holds it high when floating."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply input; place a 0.1 µF decoupling capacitor between VCC and GND."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for all signals (0 V)."
      },
      {
        "number": "4",
        "name": "PFI",
        "type": "input",
        "description": "Noninverting input to the power fail comparator; PFO goes low when PFI is below 1.25 V, and PFI connects to GND if unused."
      },
      {
        "number": "5",
        "name": "PFO",
        "type": "output",
        "description": "Active-low power fail comparator output that goes low when PFI is less than 1.25 V."
      },
      {
        "number": "6",
        "name": "WDI",
        "type": "input",
        "description": "Watchdog input; WDO goes low if WDI stays high or low longer than the watchdog timeout period (1.6 s typ), and any transition on WDI clears the timer."
      },
      {
        "number": "7",
        "name": "RESET",
        "type": "output",
        "description": "Active-low logic reset output that is asserted for 200 ms when VCC falls below the reset threshold (2.93 V typ for the S version) or MR is low, and stays low for 200 ms after VCC rises above the threshold or MR goes high."
      },
      {
        "number": "8",
        "name": "WDO",
        "type": "output",
        "description": "Active-low watchdog output that goes low if the watchdog timer times out from WDI inactivity, remains low whenever VCC is below the reset threshold, and goes high immediately once VCC rises above it."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Table 3 labels pin 7 for the 'ADM706T Only' (a typo for CBM706T) and the text on page 12 has some CB; Table 3 does not state the type of each pin; the pin types are inferred from the descriptions.",
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 22,
        "cost_usd": 0.3579,
        "at": "2026-10-17T21:56:46"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884914644770816",
        "pages": 22,
        "sha256": "abb1ef59349c0eb3",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "cbm706sas8.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "cbm706sas8-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0086c36a196f86b98ff18eed7004354ca7bf0fa4919b0da9c22e514dc7696cbb",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}