CAV24C64WE-GT3

{
  "slug": "cav24c64we-gt3",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "cav24c64we-gt3",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "cav24c64we-gt3.kicad_sym",
    "cav24c64we-gt3.kicad_mod",
    "cav24c64we-gt3.glb",
    "cav24c64we-gt3.step",
    "cav24c64we-gt3.lbr",
    "docs/hero.png",
    "docs/cav24c64we-gt3-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "cav24c64we-gt3-hero.glb",
    "cav24c64we-gt3-hero.overlay.json"
  ],
  "component": {
    "mpn": "CAV24C64WE-GT3",
    "manufacturer": "onsemi",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588900427417337856",
    "parts": {
      "symbol": "cav24c64we-gt3.kicad_sym",
      "footprint": "cav24c64we-gt3.kicad_mod",
      "model_3d": "cav24c64we-gt3-hero.glb",
      "model_3d_plain": "cav24c64we-gt3.glb",
      "model_3d_step": "cav24c64we-gt3-etched.step",
      "model_3d_step_plain": "cav24c64we-gt3.step",
      "lbr": "cav24c64we-gt3.lbr"
    },
    "distributor_links": {
      "lcsc": "C154621",
      "digikey": "CAV24C64WE-GT3OSTR-ND",
      "mouser": "863-CAV24C64WE-GT3"
    },
    "distributor_check": {
      "checked_at": "2026-10-10T00:07:11Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "CAV24C64WE-GT3OSTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "863-CAV24C64WE-GT3",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "A0",
        "type": "input",
        "description": "Device address input, hard-wired HIGH or LOW to set the address that the Slave address bits must match; pulled LOW internally when left floating, allowing up to eight devices on one bus."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Device address input, hard-wired HIGH or LOW to set the address that the Slave address bits must match; pulled LOW internally when left floating, allowing up to eight devices on one bus."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "Device address input, hard-wired HIGH or LOW to set the address that the Slave address bits must match; pulled LOW internally when left floating, allowing up to eight devices on one bus."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial data I/O that accepts input data and delivers output data; open drain in transmit mode, sampled on the SCL rising edge and driven on the SCL falling edge, and connected to VCC through a pull-up resistor."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock input that accepts the clock signal generated by the Master."
      },
      {
        "number": "7",
        "name": "WP",
        "type": "input",
        "description": "Write Protect input; when pulled HIGH it inhibits all write operations, and it is pulled LOW internally when left floating."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply, 2.5 V to 5.5 V (1.8 V to 5.5 V for CAV24C64C4CTR); the device powers up into Standby after VCC exceeds the POR trigger level."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet's SOIC/TSSOP pin-configuration figure is text-scrambled. Only pin 1 (A0) is explicitly; The datasheet gives no separate electrical limits for individual pins beyond those in the absolute m"
        ],
        "pages_sent": 14,
        "cost_usd": 0.1685,
        "at": "2026-10-10T00:05:05"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588900427417337856",
        "pages": 14,
        "sha256": "2e595ab825b6a356",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "cav24c64we-gt3.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "cav24c64we-gt3-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d1225b2785fb2c15fdd18c6e09b02b7f8de78080a7c7b80d8c2b74742a19ae2e",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}