CAT25080VI-GT3

{
  "schema_version": 1,
  "type": "component",
  "slug": "cat25080vi-gt3",
  "title": "CAT25080VI-GT3",
  "brief": "onsemi EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "memory",
    "cat25080vi-gt3",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "CAT25080VI-GT3",
    "manufacturer": "onsemi",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589041927635681280",
    "parts": {
      "symbol": "cat25080vi-gt3.kicad_sym",
      "footprint": "cat25080vi-gt3.kicad_mod",
      "model_3d": "cat25080vi-gt3-hero.glb",
      "model_3d_plain": "cat25080vi-gt3-etched.glb",
      "model_3d_step": "cat25080vi-gt3-etched.step",
      "model_3d_step_plain": "cat25080vi-gt3.step",
      "lbr": "cat25080vi-gt3.lbr"
    },
    "distributor_links": {
      "lcsc": "C890368"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T14:41:16Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS",
        "type": "input",
        "description": "Chip select input that enables/disables the device; when high SO is tri-stated and the device is in standby, and each session needs a high-to-low transition at start and low-to-high at end."
      },
      {
        "number": "2",
        "name": "SO",
        "type": "tri_state",
        "description": "Serial data output that shifts data out on the falling edge of SCK in SPI modes (0,0) and (1,1), and is high impedance when CS is high or during hold."
      },
      {
        "number": "3",
        "name": "WP",
        "type": "input",
        "description": "Write protect input that allows all write operations when high, and disables Status Register writes when low with the WPEN bit set to 1."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "5",
        "name": "SI",
        "type": "input",
        "description": "Serial data input that accepts op-codes, addresses and data, latched on the rising edge of SCK in SPI modes (0,0) and (1,1)."
      },
      {
        "number": "6",
        "name": "SCK",
        "type": "input",
        "description": "Serial clock input from the host used to synchronize communication, up to 20 MHz at 5 V."
      },
      {
        "number": "7",
        "name": "HOLD",
        "type": "input",
        "description": "Hold input that pauses serial transmission when taken low (with SCK low) and resumes when taken high; tie to VCC directly or through a resistor when unused."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply, 1.8 V to 5.5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 15,
        "cost_usd": 0.2502,
        "at": "2026-10-17T14:39:09"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589041927635681280",
        "pages": 15,
        "sha256": "2cb7ee5d6cc1677c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "cat25080vi-gt3.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "cat25080vi-gt3-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d684b6d4e2c62433fe31f0133674abe6add62c028d7f1bbd2b14e122d5ad389a",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "onsemi",
      "Package": "SOIC-8",
      "Category": "Memory",
      "Pins": "8"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "2cb7ee5d6cc1677c02d1ebede542d3bec7a773f779de4fc87cb6ba6b0237914d",
      "rows": [
        {
          "name": "Operating Temperature",
          "symbol": "TA",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -45,
          "typ": null,
          "max": 130,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Storage Temperature",
          "symbol": "TSTG",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Voltage on any Pin with Respect to Ground",
          "symbol": "VIN",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.5,
          "typ": null,
          "max": 0.5,
          "conditions": "Respect to Ground (Note 1); max printed as VCC + 0.5 V",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Endurance",
          "symbol": "NEND",
          "kind": "electrical",
          "unit": "Program / Erase Cycles",
          "min": 1000000,
          "typ": null,
          "max": null,
          "conditions": "Page Mode, VCC = 5 V, 25°C (Note 3)",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Data Retention",
          "symbol": "TDR",
          "kind": "electrical",
          "unit": "Years",
          "min": 100,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Supply Current (Read, Write)",
          "symbol": "ICC",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 2,
          "conditions": "Read, Write, VCC = 5.0 V, SO open; 10 MHz / −40°C to +85°C",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Standby Current (WP = VCC)",
          "symbol": "ISB1",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 2,
          "conditions": "VIN = GND or VCC, CS = VCC, WP = VCC, VCC = 5.0 V",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Standby Current (WP = GND)",
          "symbol": "ISB2",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 4,
          "conditions": "VIN = GND or VCC, CS = VCC, WP = GND, VCC = 5.0 V; TA = −40°C to +85°C",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Input Leakage Current",
          "symbol": "IL",
          "kind": "electrical",
          "unit": "µA",
          "min": -2,
          "typ": null,
          "max": 2,
          "conditions": "VIN = GND or VCC",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Output Leakage Current",
          "symbol": "ILO",
          "kind": "electrical",
          "unit": "µA",
          "min": -1,
          "typ": null,
          "max": 1,
          "conditions": "CS = VCC, VOUT = GND or VCC; TA = −40°C to +85°C",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Input Low Voltage",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": -0.5,
          "typ": null,
          "max": 0.3,
          "conditions": "Max printed as 0.3 VCC (VCC-relative)",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Input High Voltage",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "V",
          "min": 0.7,
          "typ": null,
          "max": 0.5,
          "conditions": "Min printed as 0.7 VCC; max printed as VCC + 0.5 V (VCC-relative)",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Output Low Voltage (VOL1)",
          "symbol": "VOL1",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "VCC > 2.5 V, IOL = 3.0 mA",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Output High Voltage (VOH1)",
          "symbol": "VOH1",
          "kind": "electrical",
          "unit": "V",
          "min": -0.8,
          "typ": null,
          "max": null,
          "conditions": "VCC > 2.5 V, IOH = −1.6 mA; min printed as VCC − 0.8 V (VCC-relative)",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Output Low Voltage (VOL2)",
          "symbol": "VOL2",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.2,
          "conditions": "VCC > 1.8 V, IOL = 150 µA",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Output High Voltage (VOH2)",
          "symbol": "VOH2",
          "kind": "electrical",
          "unit": "V",
          "min": -0.2,
          "typ": null,
          "max": null,
          "conditions": "VCC > 1.8 V, IOH = −100 µA; min printed as VCC − 0.2 V (VCC-relative)",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Output Capacitance (SO)",
          "symbol": "COUT",
          "kind": "electrical",
          "unit": "pF",
          "min": null,
          "typ": null,
          "max": 8,
          "conditions": "VOUT = 0 V; TA = 25°C, f = 1.0 MHz, VCC = +5.0 V",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Input Capacitance (CS, SCK, SI, WP, HOLD)",
          "symbol": "CIN",
          "kind": "electrical",
          "unit": "pF",
          "min": null,
          "typ": null,
          "max": 8,
          "conditions": "VIN = 0 V; TA = 25°C, f = 1.0 MHz, VCC = +5.0 V",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Clock Frequency",
          "symbol": "fSCK",
          "kind": "timing",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 5,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Data Setup Time",
          "symbol": "tSU",
          "kind": "timing",
          "unit": "ns",
          "min": 20,
          "typ": null,
          "max": null,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Data Hold Time",
          "symbol": "tH",
          "kind": "timing",
          "unit": "ns",
          "min": 20,
          "typ": null,
          "max": null,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "SCK High Time",
          "symbol": "tWH",
          "kind": "timing",
          "unit": "ns",
          "min": 75,
          "typ": null,
          "max": null,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "SCK Low Time",
          "symbol": "tWL",
          "kind": "timing",
          "unit": "ns",
          "min": 75,
          "typ": null,
          "max": null,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "HOLD to Output Low Z",
          "symbol": "tLZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 50,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Input Rise Time",
          "symbol": "tRI",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 2,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C (Note 10)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Input Fall Time",
          "symbol": "tFI",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 2,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C (Note 10)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "HOLD Setup Time",
          "symbol": "tHD",
          "kind": "timing",
          "unit": "ns",
          "min": 0,
          "typ": null,
          "max": null,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "HOLD Hold Time",
          "symbol": "tCD",
          "kind": "timing",
          "unit": "ns",
          "min": 10,
          "typ": null,
          "max": null,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Output Valid from Clock Low",
          "symbol": "tV",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 70,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Output Hold Time",
          "symbol": "tHO",
          "kind": "timing",
          "unit": "ns",
          "min": 0,
          "typ": null,
          "max": null,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Output Disable Time",
          "symbol": "tDIS",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 50,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "HOLD to Output High Z",
          "symbol": "tHZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "CS High Time",
          "symbol": "tCS",
          "kind": "timing",
          "unit": "ns",
          "min": 80,
          "typ": null,
          "max": null,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "CS Setup Time",
          "symbol": "tCSS",
          "kind": "timing",
          "unit": "ns",
          "min": 30,
          "typ": null,
          "max": null,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "CS Hold Time",
          "symbol": "tCSH",
          "kind": "timing",
          "unit": "ns",
          "min": 30,
          "typ": null,
          "max": null,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "CS Inactive Setup Time",
          "symbol": "tCNS",
          "kind": "timing",
          "unit": "ns",
          "min": 20,
          "typ": null,
          "max": null,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "CS Inactive Hold Time",
          "symbol": "tCNH",
          "kind": "timing",
          "unit": "ns",
          "min": 20,
          "typ": null,
          "max": null,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "WP Setup Time",
          "symbol": "tWPS",
          "kind": "timing",
          "unit": "ns",
          "min": 10,
          "typ": null,
          "max": null,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "WP Hold Time",
          "symbol": "tWPH",
          "kind": "timing",
          "unit": "ns",
          "min": 10,
          "typ": null,
          "max": null,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Write Cycle Time",
          "symbol": "tWC",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": null,
          "max": 5,
          "conditions": "VCC = 1.8 V − 5.5 V, −40°C to +85°C (Note 12)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Power-up to Read Operation",
          "symbol": "tPUR",
          "kind": "timing",
          "unit": "ms",
          "min": 0.1,
          "typ": null,
          "max": 1,
          "conditions": "VCC stable at operating voltage (Note 11)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Power-up to Write Operation",
          "symbol": "tPUW",
          "kind": "timing",
          "unit": "ms",
          "min": 0.1,
          "typ": null,
          "max": 1,
          "conditions": "VCC stable at operating voltage (Note 11)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Supply Voltage Range",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.8,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 1,
          "source": "datasheet"
        },
        {
          "name": "Operating Temperature (Industrial)",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "Industrial grade (I) per ordering information",
          "source_page": 11,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "cat25080vi-gt3"
  ],
  "discovery_pitch": "CAT25080VI-GT3 (onsemi) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "cat25080vi-gt3.kicad_sym",
    "cat25080vi-gt3.kicad_mod",
    "cat25080vi-gt3.glb",
    "cat25080vi-gt3.step",
    "cat25080vi-gt3.lbr",
    "docs/hero.png",
    "docs/cat25080vi-gt3-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "cat25080vi-gt3-hero.glb",
    "cat25080vi-gt3-hero.overlay.json",
    "cat25080vi-gt3-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}