BY25Q32BSTIG

{
  "slug": "by25q32bstig",
  "version": "0.1.0",
  "type": "component",
  "description": "BOYAMICRO NOR FLASH, SOP-8-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "by25q32bstig",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "by25q32bstig.kicad_sym",
    "by25q32bstig.kicad_mod",
    "by25q32bstig.glb",
    "by25q32bstig.step",
    "by25q32bstig.lbr",
    "docs/hero.png",
    "docs/by25q32bstig-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "by25q32bstig-hero.glb",
    "by25q32bstig-hero.overlay.json",
    "by25q32bstig-etched.glb"
  ],
  "component": {
    "mpn": "BY25Q32BSTIG",
    "manufacturer": "BOYAMICRO",
    "package": "SOP-8-150mil",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/3152d1342417412e14e3d28c74cb8656.pdf",
    "parts": {
      "symbol": "by25q32bstig.kicad_sym",
      "footprint": "by25q32bstig.kicad_mod",
      "model_3d": "by25q32bstig-hero.glb",
      "model_3d_plain": "by25q32bstig-etched.glb",
      "model_3d_step": "by25q32bstig-etched.step",
      "model_3d_step_plain": "by25q32bstig.step",
      "lbr": "by25q32bstig.lbr"
    },
    "distributor_links": {
      "lcsc": "C7419821"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T06:18:03Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "/CS",
        "type": "input",
        "description": "Chip Select: when high the device is deselected, inputs are ignored and outputs are high impedance; driving it low enables the device, and a falling edge is required before any instruction after power-up."
      },
      {
        "number": "2",
        "name": "SO (IO1)",
        "type": "bidirectional",
        "description": "Serial data output for single-bit instructions, shifting data out on the falling edge of SCK, and IO1 for Dual or Quad instructions."
      },
      {
        "number": "3",
        "name": "/WP (IO2)",
        "type": "bidirectional",
        "description": "Write Protect in single-bit or Dual instructions (blocks Status Register writes when low with SRP1/SRP0 set to 0/1) and IO2 in Quad mode, with an internal pull-up so it may be left unconnected if Quad is not used."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "5",
        "name": "SI (IO0)",
        "type": "bidirectional",
        "description": "Serial data input for instructions, addresses and data to be programmed, latched on the rising edge of SCK, and IO0 for Dual or Quad instructions."
      },
      {
        "number": "6",
        "name": "SCLK",
        "type": "input",
        "description": "Serial Clock input that synchronizes the SPI interface, with inputs latched on the rising edge and data output changing after the falling edge."
      },
      {
        "number": "7",
        "name": "/HOLD (IO3)",
        "type": "bidirectional",
        "description": "Hold (pause) serial transfer in single-bit or Dual instructions when QE=0, and IO3 in Quad I/O mode when QE=1, with an internal pull-up so it may be left unconnected if Quad is not used."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Core and I/O power supply, 2.7 V to 3.6 V, which must be held stable within the valid range during all operations."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin-number-to-name mapping is read from the SOP8 pin-configuration figure (page 4), where the extrac"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0929,
        "at": "2026-10-23T06:17:17"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/3152d1342417412e14e3d28c74cb8656.pdf",
        "pages": 78,
        "sha256": "e248f34bd3350ce7",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "by25q32bstig.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "by25q32bstig-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "94e9867ee722db2f1707a420a56f23ca50dc35bbe80b3b5d44cf6c9a6bf1cfc8",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}