component
BR24G1MFJ-5AE2
Public Made by Adomby adom
ROHM Semicon EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownBR24G1MFJ-5AE2
ROHM Semicon · EEPROM · SOIC-8
BR24G1MFJ-5AE2 from ROHM Semicon, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | unconnected | Not used as a device address; it may be connected to VCC or GND or left open. |
| 2 | A1 | input | Slave address setting input; connect to VCC or GND, and it has an internal pull-down so an open pin behaves as GND. |
| 3 | A2 | input | Slave address setting input; connect to VCC or GND, and it has an internal pull-down so an open pin behaves as GND. |
| 4 | GND | power_in | Reference voltage of all inputs and outputs, 0 V. |
| 5 | SDA | bidirectional | Serial data input/output; NMOS open drain that requires a pull-up resistor, with a maximum output low current IOLMAX of 10 mA at Ta = 25 °C. |
| 6 | SCL | input | Serial clock input. |
| 7 | WP | input | Write protect input; connect to VCC or GND or drive HIGH or LOW, and an open pin is recognized as LOW due to an internal pull-down. |
| 8 | VCC | power_in | Power supply pin, operating supply voltage 1.7 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM Semicon |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | -0.3 | 6.5 | V | Ta = 25 °C | 4 | |
| Input Voltage / Output Voltage | -0.3 | V | Ta = 25 °C; max not over 6.5 V; min -1.0 V for pulse width 50 ns or less; max printed as VCC+1.0 | 4 | |||
| Electro Static Discharge (Human Body Model) | VESD | -4000 | 4000 | V | Ta = 25 °C | 4 | |
| Maximum Output Low Current (SDA) | IOLMAX | 10 | mA | Ta = 25 °C | 4 | ||
| Maximum Junction Temperature | Tjmax | 150 | °C | 4 | |||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 4 | ||
| Supply Voltage | VCC | 1.7 | 5.5 | V | 5 | ||
| Ambient Operating Temperature | Ta | -40 | 85 | °C | 5 | ||
| Bypass Capacitor | C | 0.1 | μF | Connect between VCC and GND (Note 9) | 5 | ||
| Input/Output Capacitance (SDA) | CI/O | 8 | pF | Ta = 25 °C, f = 1 MHz; VI/O = GND | 5 | ||
| Input Capacitance (SCL, A0, A1, A2, WP) | CIN | 8 | pF | Ta = 25 °C, f = 1 MHz; VIN = GND | 5 | ||
| Input Impedance 1 | ZIH | 500 | kΩ | 0.7VCC ≤ VIN (A1, A2, WP) | 5 | ||
| Input Impedance 2 | ZIL | 30 | kΩ | VIN ≤ 0.3VCC (A1, A2, WP) | 5 | ||
| Input Low Voltage | VIL | -0.3 | V | 5 | |||
| Output Low Voltage 1 | VOL1 | 0.4 | V | IOL = 3.2 mA, 2.5 V ≤ VCC ≤ 5.5 V (SDA) | 5 | ||
| Output Low Voltage 2 | VOL2 | 0.2 | V | IOL = 1.0 mA, 1.7 V ≤ VCC < 2.5 V (SDA) | 5 | ||
| Input Leakage Current 1 | ILI1 | -1 | 1 | μA | VIN = 0 V or VCC (A1, A2, WP) | 5 | |
| Input Leakage Current 2 | ILI2 | -1 | 1 | μA | VIN = 0 V to VCC (A0, SCL) | 5 | |
| Output Leakage Current | ILO | -1 | 1 | μA | VOUT = 0 V to VCC (SDA) | 5 | |
| Supply Current (Write) | ICC1 | 3 | mA | VCC = 5.5 V, fSCL = 1 MHz, tWR = 3.5 ms; Byte Write, Page Write; average value | 5 | ||
| Supply Current (Read) | ICC2 | 1.5 | mA | VCC = 5.5 V, fSCL = 1 MHz; Random Read, Current Read, Sequential Read; average value | 5 | ||
| Standby Current | ISB | 5 | μA | VCC = 5.5 V, SDA, SCL = VCC; A1, A2, WP = 0 V | 5 | ||
| Clock Frequency | fSCL | 1 | MHz | 6 | |||
| Data Clock High Period | tHIGH | 260 | ns | 6 | |||
| Data Clock Low Period | tLOW | 500 | ns | 6 | |||
| SDA, SCL (input) Rise Time | tR | 1000 | ns | 6 | |||
| SDA, SCL (input) Fall Time | tF1 | 1000 | ns | 6 | |||
| SDA (output) Fall Time | tF2 | 120 | ns | 6 | |||
| Start Condition Hold Time | tHD:STA | 250 | ns | 6 | |||
| Start Condition Setup Time | tSU:STA | 200 | ns | 6 | |||
| Input Data Hold Time | tHD:DAT | 0 | ns | 6 | |||
| Input Data Setup Time | tSU:DAT | 50 | ns | 6 | |||
| Output Data Delay Time | tPD | 50 | 450 | ns | 6 | ||
| Output Data Hold Time | tDH | 50 | ns | 6 | |||
| Stop Condition Setup Time | tSU:STO | 250 | ns | 6 | |||
| Bus Free Time | tBUF | 500 | ns | 6 | |||
| Write Cycle Time | tWR | 3.5 | ms | 6 | |||
| Noise Suppression Time (SCL, SDA) | tI | 50 | ns | 6 | |||
| WP Hold Time | tHD:WP | 1 | μs | 6 | |||
| WP Setup Time | tSU:WP | 0.1 | μs | 6 | |||
| WP High Period | tHIGH:WP | 1 | μs | 6 | |||
| Write Cycles | 4e+06 | Times | Ta = 25 °C | 5 | |||
| Data Retention | 200 | Years | Ta = 55 °C | 5 | |||
| Junction to Ambient (1s board) | θJA | 149.3 | °C/W | 1s board per JESD51-3; still air per JESD51-2A | 4 | ||
| Junction to Ambient (2s2p board) | θJA | 76.9 | °C/W | 2s2p board per JESD51-7; still air per JESD51-2A | 4 | ||
| Junction to Top Characterization Parameter (1s board) | ΨJT | 18 | °C/W | 1s board per JESD51-3 | 4 | ||
| Junction to Top Characterization Parameter (2s2p board) | ΨJT | 11 | °C/W | 2s2p board per JESD51-7 | 4 |
CAD (KiCad official)
- Symbol:
BR24G1MFJ-5AE2 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
br24g1mfj-5ae2-etched.step/br24g1mfj-5ae2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);br24g1mfj-5ae2.step/br24g1mfj-5ae2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ROHM Semicon datasheet (37 pp, sha256
1e3b2bedd23845d1, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).