main
Ray Publish 0.1.1 e868da3
{
  "schema_version": 1,
  "type": "component",
  "slug": "bq51050brhlr",
  "title": "BQ51050BRHLR",
  "brief": "Texas Instruments Battery Management, QFN-20-EP(3.7x4.7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "bq51050brhlr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "BQ51050BRHLR",
    "manufacturer": "Texas Instruments",
    "package": "QFN-20-EP(3.7x4.7)",
    "pin_count": 21,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://www.ti.com/cn/lit/gpn/bq51050b",
    "parts": {
      "symbol": "bq51050brhlr.kicad_sym",
      "footprint": "bq51050brhlr.kicad_mod",
      "model_3d": "bq51050brhlr-hero.glb",
      "model_3d_plain": "bq51050brhlr.glb",
      "model_3d_step": "bq51050brhlr-etched.step",
      "model_3d_step_plain": "bq51050brhlr.step",
      "lbr": "bq51050brhlr.lbr"
    },
    "distributor_links": {
      "lcsc": "C133307"
    },
    "pins": [
      {
        "number": "1",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground connection for the device."
      },
      {
        "number": "2",
        "name": "AC1",
        "type": "input",
        "description": "AC power input from receiver coil with maximum input voltage of 20V and 2A RMS current rating."
      },
      {
        "number": "3",
        "name": "BOOT1",
        "type": "output",
        "description": "Bootstrap output for driving high-side FETs of synchronous rectifier; connect 10-nF ceramic capacitor from BOOT1 to AC1."
      },
      {
        "number": "4",
        "name": "BAT",
        "type": "power_out",
        "description": "Output pin delivering regulated power to battery at 4.20V with maximum 1.5A charging current."
      },
      {
        "number": "5",
        "name": "CLAMP1",
        "type": "output",
        "description": "Open-drain FET output for non-power dissipative overvoltage AC clamp protection; activates when RECT voltage exceeds 15V threshold."
      },
      {
        "number": "6",
        "name": "COMM1",
        "type": "output",
        "description": "Open-drain output for load modulation communication with primary; connect capacitor from COMM1 to AC1 for capacitive load modulation."
      },
      {
        "number": "7",
        "name": "CHG",
        "type": "output",
        "description": "Open-drain status output active when BAT output is enabled with maximum 15mA sink current rating."
      },
      {
        "number": "8",
        "name": "AD-EN",
        "type": "output",
        "description": "Push-pull driver output for external PFET control when wired charging is active; float if not used."
      },
      {
        "number": "9",
        "name": "AD",
        "type": "input",
        "description": "Adapter voltage detection input with 3.6V typical presence threshold and maximum 30V rating; connect 1-µF capacitor to PGND or direct to PGND if unused."
      },
      {
        "number": "10",
        "name": "TERM",
        "type": "input",
        "description": "Termination threshold programming input; sets termination current as percentage of programmed charge current IBULK."
      },
      {
        "number": "11",
        "name": "EN2",
        "type": "input",
        "description": "Priority control input between wireless power and wired power with 1.3V high threshold; EN2 low enables wired charging when AD present."
      },
      {
        "number": "12",
        "name": "ILIM",
        "type": "bidirectional",
        "description": "Current programming pin where total resistance RILIM from ILIM to PGND sets charging current from 500mA to 1.5A; KILIM factor is 314 AΩ."
      },
      {
        "number": "13",
        "name": "TS/CTRL",
        "type": "input",
        "description": "Temperature sense input for NTC thermistor monitoring with 2.2V internal bias voltage; connect NTC resistor to PGND or 10-kΩ resistor if NTC not used."
      },
      {
        "number": "14",
        "name": "FOD",
        "type": "input",
        "description": "Foreign object detection power measurement input for WPC v1.2 compatibility with 0-5W received power measurement range."
      },
      {
        "number": "15",
        "name": "COMM2",
        "type": "output",
        "description": "Open-drain output for load modulation communication with primary; connect capacitor from COMM2 to AC2 for capacitive load modulation."
      },
      {
        "number": "16",
        "name": "CLAMP2",
        "type": "output",
        "description": "Open-drain FET output for non-power dissipative overvoltage AC clamp protection; activates when RECT voltage exceeds 15V threshold."
      },
      {
        "number": "17",
        "name": "BOOT2",
        "type": "output",
        "description": "Bootstrap output for driving high-side FETs of synchronous rectifier; connect 10-nF ceramic capacitor from BOOT2 to AC2."
      },
      {
        "number": "18",
        "name": "RECT",
        "type": "output",
        "description": "Filtered rectifier output node; connect ceramic capacitor from 4.7µF to 22µF to PGND depending on power level."
      },
      {
        "number": "19",
        "name": "AC2",
        "type": "input",
        "description": "AC power input from receiver coil with maximum input voltage of 20V and 2A RMS current rating."
      },
      {
        "number": "20",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground connection for the device."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 21 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 44,
        "cost_usd": 0.4722,
        "at": "2026-09-22T23:38:38"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/bq51050b",
        "pages": 44,
        "sha256": "38293c82dac0e8d1",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "bq51050brhlr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          5,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b7baaecccc8e434d25dca4018e56abf0d52bfa4ab833f927054939e1c879cf4e",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "bq51050brhlr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          5,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "71f417f83f45cbf681060abf1ea8e74ca60fdb40a35d3c4baa4b23886a9dd08b",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "QFN-20-EP(3.7x4.7)",
      "Category": "Power Management (PMIC)",
      "Pins": "21"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "bq51050brhlr"
  ],
  "discovery_pitch": "BQ51050BRHLR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "bq51050brhlr.kicad_sym",
    "bq51050brhlr.kicad_mod",
    "bq51050brhlr.glb",
    "bq51050brhlr.step",
    "bq51050brhlr.lbr",
    "docs/hero.png",
    "docs/bq51050brhlr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "bq51050brhlr-etched.step",
    "bq51050brhlr-hero.glb",
    "bq51050brhlr-hero.overlay.json"
  ],
  "visibility": "public",
  "updated_at": "2026-09-24T18:05:25.130Z",
  "description": "Texas Instruments Battery Management, QFN-20-EP(3.7x4.7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "org": "adom"
}